similar to: Guidence in DialPlan programming.

I have thsi code in a dial plan. The purpose of which is to set distinctive ring tones for internal and transferred calls. exten => _.,1,Noop(CALLERID_ALL=${CALLERID(all)}) exten => _.,n,Set(CallerIDNum=${CALLERID(num)}) ; This just shows a list of interesting variables and their values ; Comment it out when finished debugging ;include => macro-dumpvars ;exten =>

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 We use Snom870 handsets with firmware v.8.7.3.19. I am trying to develop a custom dial plan to invoke a distinctive ring-tone when an external call is transferred internally. Based on an earlier solution I discovered I am attempting this: [from-internal] include => set-alert-if-local [from-internal-original]

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4 FreePBX = 2.11.0.4 I am trying to understand flow control in Asterisk dial plans and not having very much luck. I have read the Asterisk book from O'Rielly, or at least those parts I believe might apply, but that has not helped me much on this particular issue. What I wish is to set three distinct ring tones on our Snom phones for

I'm using FreePBX 2.5.2.2 with Asterisk 1.6.1.4. If I make a call and then decide to blind transfer them using ## my side of the call is not hung up. Instead it sends me to voicemail. If somebody calls me and then I blind transfer them with ## I am hung up on as expected. I called from 8678 to 28688. I then transferred the call to 8532. Asterisk acts like it wants to hang up, but then

Hello all, I have a system running AsteriskNOW with asterisk asterisk-1.8.8.1-1_centos5 from AsteriskNOW repository. I just changed our Polycom 335 sip.conf so that blindpreferred=1 (all transfers default as blind transfers). If a customer calls in & we answer & transfer, everything works fine. But if we call out to a customer & then transfer to another internal extension, that

I am using Asterisk 11.17.1 with my program that uses AMI Originate calls to generate a bunch of calls for a callcenter. The PBX configuration is handled by FreePBX 2.11. I want to understand the dialplan behavior in order to figure out why the CDR(recordingfile) is blank on the CDR records despite the dialplan setting it. My program generates the calls by setting Channel=Local/NUMBERTODIAL at

Steve Edwards <asterisk.org at sedwards.com> schrieb: > You can fiddle with the ring tone by phone specific configuration and > phone specific SIP headers (sipaddheader(Alert-Info: ...)). > > These seem relevant: > > http://www.voip-info.org/wiki/view/RTTTL+melodies+for+ST2030 (the > discussion looks relevant as well). > >

Hello - I've read Asterisk should be able to activate a do not disturb feature to turn off the ringers on extensions. I checked the wiki and can't find documentation for how to do it. Here's my attempt, added to extensions.conf: [dnd-on] exten => _#78,1,Answer exten => _#78,n,Wait(1) exten => _#78,n,Macro(user-callerid,) exten =>

Hello, I have a couple a questiosn and hope you guys out there can help me or at least point me in some directions... I'm currently planing deployment of samba and apache+ftp with LDAP auth. I've already setup a debian-powerpc distro to play around with. a) I've a MacOS X 10.3 Server with LDAP and I'd like to use LDAP auth for samba. is it possible? Are there any compatability

Hello all, I am new to Linux Ethernet bridging. Let me first start with what I am trying to achieve. Well you see - I am attempting to have 2 main firewall running at the same time - one as a master and the other one as a slave. Yes, I would like to make use of Ethernet bridging in this scenario - as I understand it, all I need are two machines and STP enabled. I am running Debian

> Hi Steve! > > Thank you very much! > It seems to run! > > I wrote that: > > exten => _00493513333333,n,Set(__ALERT_INFO=Bellcore-r3) > exten => _00493513333333,n,SIPAddHeader("Alert-Info:< http://www.notused.com > >\;info=alert-external\;x-line-id=0") > > and the phone rings with another melody. > Very curious is, that if I

Hi Guys I'm using asterisk 1.8.23.1 When I add a SIP Header from inside the extensions.conf (SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-internal\;x-line-id=0) ) it works fine. When I try to do the same thing from within a database table, all of the string apart from x-line-id=0 gets ignored. I've tried escaping the semicolon and not escaping it and the result is

We're having an issue where we call ReceiveFax in a context that includes a hangup extension and half the time dialplan execution doesn't continue after the fax is received successfully. Am I missing something simple here? Below is a sample call where this happened: The last log line for this channel/call is: [Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel

On 4 April 2019 at 17:28, ivo welch wrote: | The following program is whittled down from a much larger program that | always works on Intel, and always works on AMD's threadripper with | lapply but not mclappy. With mclapply on AMD, all processes go into | "suspend" mode and the program then hangs. This bug is replicable on an | AMD Ryzen Threadripper 2950X 16-Core Processor (128GB

The following program is whittled down from a much larger program that always works on Intel, and always works on AMD's threadripper with lapply but not mclappy. With mclapply on AMD, all processes go into "suspend" mode and the program then hangs. This bug is replicable on an AMD Ryzen Threadripper 2950X 16-Core Processor (128GB RAM), running latest ubuntu 18.04. The R version

Hello all. I have installed AsteriskNow 1.7.1 with all updates. I'm able to make outbound calls without any problem (the external calls are made via an analog line, and the receiver see the CID). However I'm unable to forward incoming calls to the destination I want. What happens is when I make an internal call I ear a "bye". Bellow is the log of the internal call: --

hello liste i have creat i trunk sip and inboun route for inbound calls the issue whe i use the DID in inboud route i have a error No DID or CID Match. but when i leave this DID field blank i can route the call without any issue how can ido in order to use DID in route inboud "i use elastix" Executing [s at from-trunk:1] NoOp("SIP/358-106-000000c0", "No DID or CID

Whenever I try to drag calls to the Parking Lot or On Hold, FOP would drop my calls. I have searched online and have found similar problem, such as the link below. I have tried their solution but still the FOP is not working correctly. I even installed the HUDLite server and is getting the same results. www.freepbx.org/forum/freepbx/users/flas...ot-transfering-calls Here is the log when I tried

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

Hello. I am running Asterisk v1.6 on Ubuntu 10.10 with FreePBX v2.8. When I call the voicemail for any of my extensions, the call just dies. On a softphone, I get no sound whatsoever; it just hangs up after a couple of seconds. On my handset attached to my SPA-3102, it get a sound like when you leave an analogue phone off the hook. I have three extensions setup and they all do the same thing.