similar to: Upgrade to Fedora 21, now gv requires rtp ?

Dear All, I have different Asterisk Servers most of them are version 1.8 - I have recently upgrade to Asterisk version 11 on 2 servers. I have Jabber ( chan_gtalk ) configured on Asterisk 1.8 version and it is working perfect within all 1.8 version servers. I have XMPP ( chan_motif ) configured on Asterisk 11 version and it is working with all 11 versions servers. When I try to call from

Dear All, I have different Asterisk Servers most of them are version 1.8 - I have recently upgrade to Asterisk version 11 on 2 servers. I have Jabber ( chan_gtalk ) configured on 1.8 version and it is working within all 1.8 version servers. I have XMPP ( chan_motif ) configured on 11 version and it is working with all 11 versions servers. When I try to call from version 11 ( usiing xmpp -

Hi all, For one of my inverstigations it looks like i'm back to "square one" I'm trying to accept an incoming xmpp call and forward it conditionally to a sip, isdn, or voicemail. No google is involved as i use a local xmpp server (ejabberd) I was experimenting on 1.8.15.1 (with jabber.conf, jingle.conf), but some suggested me to have a look at asterisk11,so i did... I

I have configured support for ice in sip.conf, and made a connection with motif to jingle, but does not work for me [Jul 15 12:03:32] ERROR[21758]: chan_motif.c:1955 jingle_interpret_ice_udp_transport: Received ICE-UDP transport information on session '8b4hdffbt37vg' but ICE support not available -- Executing [s at xmpp-in:1] NoOp("Motif/allan-ce76", " llamada de

hi, is there someone with working asterisk13+chan_sip+SIP.js/sipml5 ? or is chan_pjsip better supported? or the recommended way for asterisk is use respoke.io? my problem with asterisk13+chan_sip+sipml5(the same problem is with SIP.js) chan_sip.c:10496 process_sdp: Can't provide secure audio requested in SDP offer " sip.conf (important parts) [vr1a882] ... nat=force_rport,comedia

Hi, Are there any thoughts about how "cpu-expensive" motif is? Does it only translate SIP <--> jingle (during call-setup) if so, impact will probably neglectible. or does asterisk remains constantly in between the data-stream? In that case, it might be something to pay serious attention to, when doing multiple call conversions simultaneously... hw

Hi, I am taking over an asterisk system from another person and having an issue where a sip trunk is restricting the outgoing codecs to just g.729 I am dialing in from a Cisco 7960. The Invite from the Cisco has the folowing M line: m=audio 17022 RTP/AVP 18 0 8 101. So it is allowing g.729, ulaw and alaw. Asterisk is tandeming the call out over a SIP trunk sip.conf tandem trunk config:

Hi All, I'm trying to upgrade asterisk server to 1.8.x from my asterisk 1.6, But when making A Call from SIP Client, I got cli Warning ... and no call has been made. My Sip Client is using lib java peers client http://peers.sourceforge.net/ with standard codec PCMU/PCMA [Jan 28 23:03:32] WARNING[1654]: chan_sip.c:8942 process_sdp: Unsupported SDP media type in offer: audio 0 RTP/AVP 0 8

Dear all, First off, I am very new to asterisk so forgive me if any of my comments or questions seem trivial. Thanks to [this post](http://blog.polybeacon.com/2010/10/17/asterisk-1-8-and-google-voice/) and [this post](http://www.davidvossel.com/?p=28), I have GV set up on asterisk through jabber.conf and gtalk.conf. I can successfully dial out from asterisk. I'm trying to set up an

Hi, For years I've been running a minimal (ish) SIP based Asterisk with the modules based on chan-sip. For various reasons unrelated to Asterisk the machine the latest incarnation of this configuration has been updated to Debian Buster and thus to Asterisk 16. Since this upgrade I have a dependency problem related to res_rtp_asterisk.so. So the old config was: [modules] autoload=no load

Asterisk Project Security Advisory - AST-2012-015 Product Asterisk Summary Denial of Service Through Exploitation of Device State Caching Nature of Advisory Denial of Service Susceptibility Remote

I have a multi-homed machine (quite a few IP addresses on one of the interfaces) For SIP I found that using externaddr in sip.conf would make it much more reliable with ICE and RTP using the correct IP Is there an equivalent setting for XMPP / motif.conf? I saw bindaddr in gtalk.conf but it doesn't appear to be mentioned in the source code for chan_motif

Hi, I am on asterisk 12.6.0. Previously I was using 10.0.1 and for Gtalk I was using chan_gtalk and jabber configuration. But on 12.6.0 I tried to use chan_motif, asterisk starts consuming 100% cpu. From pstack trace I got it is because of ICE and to run motif ICE is necessary. Has anyone else seen this issue or any solution for this? I am using neither STUN nor TURN. I have just enabled ICE in

Outoing calls I make using Motif Google Voice Calls continue ringing even after the other end picks up. I have to restart Asterisk to resolve the issue. I don't see any errors. It's not recognizing that the other party picked up the phone and restarting Asterisk fixes it only for a day. -- Co-op Vacation Rentals www.coopvr.com 15218 Summit Ave Suite #300-354 Fontana, CA 92336

Hi all, Been reading about chan_motif / chan_xmpp in the wiki's for 1.8, 10 and 11 version of asterisk. In each example i got the impression that the asterisk server is registering on a XMPP server as a single user with the credentials as specified in jabber.conf. Instead of a single xmpp-user, could that also be multiple users? For instance, for each sip-user an xmpp-user? When i skim

I'm not getting any ringing when I use option r with Dial: Dial("DAHDI/1-1", "motif/8447/+1<called-num>@voice.google.com,,rTt") in new stack Otherwise all works. The call goes through, good audio. sean

Given the recent announcement about Google slimming their support for public interconnection with XMPP, can anybody comment on where this leaves the XMPP support in Asterisk? In particular, I notice many of the references to XMPP on the wiki link to https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google which seems to suggest that XMPP support and Google Talk support are one and the

I've now replicated my setup on a host with a single IPv4 address and I am still having trouble with the ICE negotiation. I am trying to call from Jitsi to Asterisk through a Prosody XMPP server. Asterisk successfully registers with the XMPP server and appears to be available in the buddy list in Jitsi. Jitsi is being run with the "-4" command line option to use IPv4 only just in

Here's my cmd: originate MOTIF/8447/+12122064431 at voice.google.com extension s at greeting Greeting: [greeting] exten=> s,1,Wait(2) same=>n,Background("hello") same=>n,Wait(3) I can see the call go out (also in, since testing on one our own numbers), but [greeting] never executes. I'm expecting to see that when the motif call comes in and is answered,

We have a customer reporting poor quality calls when they come to us via a particular provider. The SIP traces look perfectly normal both on the ingress to us and egress to another telco. No additional sip messages after the call has been answered until the BYE is received. However in the asterisk logs I am getting this :- 2014-02-05 13:45:03 | C-00108c80] rtp_engine.c: -- Locally bridging