similar to: Deactivate faxdetect on IAX channel

I solved the issue by not answering the call as I assume others have done. -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Administrator TOOTAI Sent: Wednesday, February 18, 2015 12:50 PM To: asterisk-users at lists.digium.com Subject: Re: [asterisk-users] Res_fax - FAXOPT(faxdetect) Hello Le

Hi, as stated in the documentation, it's allowed to set FAXOPT(faxdetect)=yes/no to allow fax detection. It's done (see below) but still fax detection :-( Extension 300 is hylafax with iaxmodem. On the upper Asterisk gw it's the same, despite the faxdetect set to no we also have the NOTICE of T.38 re-INVITE. Test is done with a mobile phone calling the 0123456789 PSTN number.

Hello Le 17/02/2015 17:00, Administrator TOOTAI a ?crit : > Hi, > > as stated in the documentation, it's allowed to set > FAXOPT(faxdetect)=yes/no to allow fax detection. > > It's done (see below) but still fax detection :-( Extension 300 is > hylafax with iaxmodem. > > On the upper Asterisk gw it's the same, despite the faxdetect set to no > we also

My Asterisk fax detection used to work, but no longer does. OK. So, here's the deal: 1. It appears that the "faxdetect" command cannot be applied channel-by-channel in zapata.conf anymore, as Asterisk appears to the last "faxdetect=" command to ALL channels. 2. My stations are detected and sent to the proper extension; i.e., when I send a fax from one zap extension

I'm using IAXmodem and Hylafax with 'faxdetect=incoming' and things mostly work pretty well. My main lines come in via T1 DID. Today, HR got tired of having someone read and forward their faxes to them and requested we bring their physical machine back on line. I have been able to get the fax forwarded to the appropriate zap channel, but I cannot seem to get it to stop

When I have HylaFAX answer a call redirected to the fax extension in Asterisk when it detects CNG, Asterisk hangs up: Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 is ringing Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 answered Zap/23-1 Jan 30 14:32:59 DEBUG[1098]: Ooh, voice format changed to 8 Jan 30 14:33:01 VERBOSE[1098]: -- Channel 0/23, span 1 got hangup Jan 30

Hi folks, I was hoping that someone might be able to help clarify some confusion I have on DAHDI Fax detection after spending some time searching. My understanding is this: 1.) Echo cancellation is automatically disabled upon recognition of a CNG tone, regardless of the faxdetect setting. This can only be disabled at compile time. 2.) faxdetect=incoming will, upon detection of a CNG tone,

Hello, We want the ability to choose from an AGI script whether or not to enable faxdetect for calls over SIP or DAHDI. Is this possible, or can anyone suggest a workaround? Thanks for any advice. -- David Cunningham, Voisonics http://voisonics.com/ USA: +1 213 221 1092 UK: +44 (0) 20 3298 1642 Australia: +61 (0) 2 8063 9019 -------------- next part -------------- An HTML attachment was

Hi all! I have trouble with connection to AMI 1.1 wich enabled on Elastix "*Asterisk Call Manager/1.1* *Action: Login Username: admin Secret: qweasd123* *Response: Error* *Message: Missing action in request*" Elastix versions: "* Kernel* * Linux(x86_64)-2.6.18-348.1.1.el5* * Elastix* * elastix-2.4.0-1* * elastix-portknock-0.0.1-0* * elastix-agenda-2.4.0-1* *

Hi folks, I've been a trixbox user for a few years now but I'm thinking about jumping ship. Trixbox is great, but it's missing two features out of the box which are really important to me: outbound faxing (hylafax) and imap voicemail. I see no indication that they will be included anytime in the near future, so I have a choice to make - I've looked around at Elastix,

We have a problem in that calls are dropped after 15 minutes (on both internal and out going calls, incoming calls do not seem to have that limit) How do we fix it? This is the version on that PBX Kernel Linux(x86_64)-2.6.18-371.1.2.el5 Elastix elastix-2.4.0-8 elastix-a2billing-1.9.4-5 elastix-addons-2.4.0-10 elastix-agenda-2.4.0-14 elastix-asterisk-sounds-1.2.3-1

>Does IAXmodem allows you to receive faxes with any extensions >(auto-detecting incoming faxes). You just let Asterisk do the fax detection for you, and when it hears CNG, send it to the fax extension, and your fax extension would just Dial() one of the IAXmodems (using IAX) >>DRi@b-w-computer.de wrote: >> sure in an small office you can use iaxmodem/hylafax to receive faxes

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

I'll begin working on full cross-version support (Asterisk 1.2, 1.4, and 1.6) in early May for nvfaxdetect and a handful of other modules. Justin Newman > >Hi, > >we are using the app_nvfaxdetect from Newman Telecom with Asterisk 1.4 >and tried to build the trunk/next release 1.6 with this application, but >it failed (We are using fax stuff with iaxmodem/Hylafax). >

Hi, we are using the app_nvfaxdetect from Newman Telecom with Asterisk 1.4 and tried to build the trunk/next release 1.6 with this application, but it failed (We are using fax stuff with iaxmodem/Hylafax). I remember that we had the same issue switching from 1.2 to 1.4 and someone made the port (We don't have the necessary knowledge to do it). Has anyone port this application to last

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

Hello, I have an issue with Digium TDM 400 card series. When I try to make outgoing call (PSTN call) for example, the Zap channel could not be created and busy channel message appeared. Below is the full log : [Feb 5 09:26:17] VERBOSE[3047] logger.c: -- Executing [s at macro- dialout-trunk:20] Dial("SIP/213-09648720", "ZAP/g1/08170709XXX|300|") in new stack [Feb

Hello Group I have a Asterisk server running with 2 Digium T1 cards installed. 1 card connects to Telco via a PRI. The 2nd card is connected to a fax server via Digi DataFire RAS 24 PT1 Adapter (Digi0001). The idea is to have Asterisk route the calls based on DID or FAX tones. Everything is working great so far. The only problem is the Fax server does not see the DID. How can I tell if Asterisk

Hi anybody, I did setup fax/voice switch according http://www.voip-info.org/tiki-index.php?page=Asterisk%20fax somthing like: [macro-faxvoiceswitch] exten => s,1,Answer exten => s,2,Macro(oneman) exten => s,3,Hangup exten => fax,1,Macro(faxmail) where: [macro-oneman] exten => s,1,SetVar(klapka=${MACRO_EXTEN:-2:2}) exten => s,2,SetVar(voicemail=${PFX_ISDN1}${klapka}) exten