similar to: forcing GSM on certain extensions

When I try to dial out I get an error: Operating with different codecs [0x2 (gsm)] [0x4 (ulaw)] , can't native bridge.. Here are the details: -- Accepting AUTHENTICATED call from 66.18.210.217: > requested format = gsm, > requested prefs = (), > actual format = gsm, > host prefs = (gsm|ilbc|ulaw|alaw|speex), > priority = mine --

I've tried to simplified the dial plan and use "n" instead of numbers but I've noticed it is not executing my voicemail if I substitute number with "n" In the example below when the call is not answered, it does not go to voicemail; call just hangup. exten => 1,1,Playback(transfer) exten => 1,n,Dial(${sales_support}&IAX2/iaxy-322,20,jrw) exten =>

Hi All, I am looking for a GSM VoIP gateway for use with Asterisk. I have come across VoiceBlue by 2N but it's price is beyond my reach. Are there any other alternatives out there? I've scanned across the mail achieves for an answer to this without much success, if the question has already been answered kindly point me to the resource. Allan.

Hello-- In the interest of Symmetry, does anyone else in the world see any need for a device like the IAXy (or the SIP ones from other manufacturers, like the ATA186), but one that presents an FXO interface instead, so it can be connected not to phones, but the PSTN? murf

MusicOnHold works only when I dial IN from PSTN line (Externally), when I dial local extension there is no music.. exten => 315,1,Dial(${family},25,m(penguin)w) There are no error messages: - Accepting DIAL from 10.0.0.108, formats = 0x4 - Executing [315 at internal:1] Dial("IAX2/iaxy-322-14962", "SIP/218|25|m(penguin)w") in new stack - Called 218 - Started music on hold,

Hello Since SIP/RTP is a pain to use with road warriors who need to connect from any location over the Internet, I'd like to get them some IAX phones instead. For those of you using this protocol instead of SIP, what would you recommend as IAX hardphones and Windows (and ideally Mac) softphones? Thank you.

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I

asterisk-users-request@lists.digium.com is believed to have said: >Hi, > >Sorry for being very late on this thread but i am trying to make a >decision on which one to go for. Options are > >1. Dock n Talk offered by Voxilla (USD139) >2. GSM Gateway by CyberTelecom (GBP60) > >I'm having a TDM400P with 1 FXO & FXS. > >I'm interested in implementing DISA

I was able to setup AudioCodes MP-114 to rote calls form FOX to Asterisk and make internal calls: Routing Tables -> Tel to IP Routing: *, *, 10.0.0.109 (my asterisk IP) But I'm not sure how to setup AuioCodes to make calls out via FXO? In extensions.conf [Globals] pstn-5665=10.0.0.157 Whenever, I try to call out I get a busy signal. -- Joseph

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

We have extra equipment that was over-ordered or unused. All of the equipment is brand new. The equipment has been highly discounted to move quickly - the last set of equipment sold in 48 hours. If this equipment is of interest to you, call or e-mail quickly. Buy on VOXILLA and SAVE $300 each (Cisco routers & switches): http://store.voxilla.com/customer/home.php?cat=259 For Sale (all new):

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

For anyone playing around with IAXy(S100i) devices, I am making the following available: Windows IAXy Provision v1.00 This is a from-the-ground-up development of a means of provisioning IAXy devices using a Windows environment. For some users, being bound to Linux for IAXy provisioning is not viable or convenient in some cases. This application provides a GUI data entry for the various IAXy

Anyone have one of these yet? http://www.voxilla.com/shop/index.php?action=item&id=38 -Dan

Hello, I'm looking for a SIP to XMPP Jingle voice gateway. I see that Asterisk has Jabber and Jingle support, but it looks like Asterisk acts as a Jabber client. Are there any Jabber server solutions, where Jabber users can call SIP users by using the SIP URI and vice versa? -- Eric Chamberlain, CISSP Chief Technical Officer Voxilla - http://voxilla.com/

Hi.. I have to setup an extension in a remote location that will use a cordless analog telephone.. I am looking at the IAXY to do this for me..Basically the data path will be as follows... [Asterisk] == (NAT) == {Internet} == (NAT) == ATA -- Handset Since there are two NAT boxes in the path I know SIP won't work.. I also don't want to move the Asterisk box to the internet side of the

Hi, I have three Iaxy devices (s101i) parts. Two of them seem to work fine. The third plays a loud repeating click sound when an analog phone is plugged in. I can provision all of them, and make calls to all of them. The clicking one will blink when a call is incoming, but no audio from the call can be heard on the handset, and the caller only hears silence. The same handset works on the

We have many IAXy devices in the field now. In all cases, in iax.conf, we have "qualify=yes", so that using "iax2 show peers", we can see whether or not the device is currently online. In some cases, the IAXy device and/or Asterisk are not communicating their qualification, because "iax2 show peers" shows the device as status UNKNOWN. However, when a user picks up

I have a brand new IAXy I'm playing with. I do not get a dialtone on the phone, or any response at ll on the phone. No sound, no dialing, no ringing. The phone and wire are tested and known to be good. I think I have it setup correctly. When I give the iaxprov command I get this: #iaxyprov 192.168.1.90 iaxy.conf 02: c0 a8 01 5a 05: 11 d9 03: ff ff ff 00 04:

Hi, I've got an IAXy, and provided it with connection data - unfortunately didn't provide a fixed ip address, but left with dhcp. Everthing went fine, and I could work a while with it. After a restart of IAXy, it didn't negotiate a new IP address, nor used the old one. I even restarted the DHCP server and cleared its cache. No success. I went to another office with a different