similar to: UPDATE instead of RE-INVITE

Asterisk is sending a 481 in response to an INVITE for reasons I do not understand. Here is the INVITE: INVITE sip:8009499014 at X.YYY.32.3:5060;transport=udp SIP/2.0 Record-Route: <sip:X.YYY.32.10;lr=on;ftag=247898> To: <sip:8009499014 at X.YYY.32.10 :5060>;tag=ac86f72d2bfe10395b2e62e01c70bf66.0f65 From: "Scott Thompson" <sip:7166359474 at X.YYY.32.10>;tag=247898

I am using Asterisk 11.3.0 and just updated Nightly to 24.0a1 (2013-06017) and get a SIP 488 Not Acceptable Here response. I have no problems using the same Asterisk configuration and the same page to make a call from Chrome. I have seen other people post a similar issue, but I have not seen a solution. If someone with good knowledge of this issue were to respond with "this is a known

Hi; If my landline service provider does not provide the ability to send the SMS, and I need to send SMS from asterisk, then what is the required? How? Is it possible to send SMS from asterisk using SIM card to be connected via GSM adaptor connected to FXS ports? Or HOW?

Hi! For some reason unknown to me, I'm completely unable to change my Samba password using smbpasswd. I always get: [19:57:36 alexander@server:~] $ smbpasswd Old SMB password: New SMB password: Retype new SMB password: machine 127.0.0.1 rejected the password change: Error was : RAP86: The specified password is invalid. Failed to change password for alexander Despite the error message,

Hi, we are operating the IT of a small non-profit organization with a Samba server (2.2.5) and roughly 15 Win2k workstations. Everything works fine so far but one single issue: Printing messages from Outlook Express: only the header of the mail is printed, no single line of the body. All the domain users are standard-users (I'm not sure about the correct English wording, may be someone

Hi, i learned a lot about cups, samba and printerdrivers the last few days and hours. I found a lot of mistakes but i can't change the following situation: I CAN NOT delete printjobs! I can connect to the printers, automatic download the driver, print, stop the printer, start the printer. Any tips, links, hints would be nice. My setup: Debian Sarge - Samba 3.0.14a - Cups 1.1.23. nss_ldap

Hi! I got a Printer in network Neigbourhood [Printer Symbol]|| and I don't know how to fix. My Printer "Drucker" is shown also. How to solve this? Marco ------------------------------------------------------ /etc/smb.conf interfaces = 192.168.10.1/24 bind interfaces only = yes netbios name = GOLEM-SERVER server string = Golem Test security = USER

On Sun, 6 Nov 2016 16:20:32 +0100 Maximilian Kirchner via samba <samba at lists.samba.org> wrote: > Thanks a lot for your help so far. The main reason I do not use vms > is that the server is pretty limited in RAM so this would only be my > last resort. To prevent confusion: srv.wie (192.168.1.50) is the same > machine as smb.wie (192.168.1.55), I seperated them just now to

Sven... What did you do. .. I thought, this was all done/fixed. ;-) > Failed to find > cifs/graz-file.ad.tao.at at AD.TAO.AT(kvno 100) in keytab > MEMORY:cifs_srv_keytab (arcfour-hmac-md5)] You need to add the cifs/spn also to the AD and the keytab. https://wiki.samba.org/index.php/Generating_Keytabs Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba

Hallo! I installed Samba 3.0.1 on Deb Woody 3.0 with Cups 1.1.19 and joined to an NT4 Domain without problems, after solving the "Umlaut" problem. Unfortunately the System was installed in german... I read a lot in the Samba HowtoCollection and installed the printer following to it step by step. Added the printer driver via APW, then connected from the Client and changed some

Hi! Well, I have a Linux machine (RedHat 9.0) with samba on it and a Win ME on the other machine and I want to share a partition for music, read-only. (Won't be hard, is mounted read-only) and a transfer share where I can write to, too. My config file looks as follwing: # Samba config file created using SWAT # from 192.168.0.1 (192.168.0.1) # Date: 2003/08/04 23:05:42 # Global parameters

Thanks a lot for your help so far. The main reason I do not use vms is that the server is pretty limited in RAM so this would only be my last resort. To prevent confusion: srv.wie (192.168.1.50) is the same machine as smb.wie (192.168.1.55), I seperated them just now to debug the problem. > These look like they are being run on the DC, what about from the > windows clients ? > I did

Hi my server crashes every 90 minutes. There is no helpfull message in any logfile, the only thing i can see is that smbd consumes 100% CPU. The server hangs completely, no access to console, no networking. This might have something to do with user logout. This server stands in a school and about 150 pupils log out after each lesson. I assume it has nothing to with printing, as printing

I am using Mike Rubel's snapshot-style rsync to do backups from my web server (Linux) to my desktop (MacOS X). Mostly, this works great, except where case sensitivity (or rather, HFS+'s semi-lack thereof) causes problems. Specifically, it seems impossible to successfully back up my Linux box's /usr/share/terminfo, as it contains directories that differ ONLY in case (e.g.,

I set up a samba 3.0.2 server as member server in a NT4 Domain. Winbind works great and I can "use" the NT Domain users for all I need. At the moment I'm testing different shares with their permissions. The Samba will also be our printserver, so I set up also cups and added the printers to samba with cupsaddsmb - Great tool! . Users could connect and all worked fine. After a reboot

After reading the last 'ct magazine i was successfull in loading up printerdrivers to my samba box via microsoft apw the first time. I am using SuSE 8.1 with cups. the "add printer command" was the thing getting it to work. my script for adding printers : #!/bin/bash # Script zum anlegen eines Sambadruckers mit cups #$1 = Ausf?hrlicher Druckername #$2 = Drucker/Queue/Share-Name

Hi there, I want to do the following: ------------------------------------------------------------ # smb.conf [global] ... printing = cups ... [pdfprinter] comment = PDF Drucker, druckt nach H:\print print command = /usr/bin/tps2file.sh "%s" "%U" "pdf" "pdfwrite" "" path = /tmp printable =

Hi, I?ve got the following problem: When accessing a share on a Samba server from Win2000 or Windows XP this fails. The access is denied. All the shares are visible within ...\Network Neighbourhood\Workgroup\Chs-server.chs.\share1 ...\Network Neighbourhood\Workgroup\Chs-server.chs.\share2 ... ...\Network Neighbourhood\Workgroup\Chs-server.chs.\Drucker und Faxdienste Besides this I see the

Hi, I've problems to install printer drivers as a normal user with unprivileged rights on WinXP in a samba 3.0.24 domain (debian etch) using the "Point-and-Print" mechanism. I've read Volker Lendecke's Samba book on page 131 footnote 1, which mention to enable "point and print". Which reg keys do I have to set to install drivers by "Point and Print"?

Hi all, I emailed Sebastian awhile back about this, but I know he is busy, so I''m asking for your help. I''m using the latest version of file_column from SVN, or the non-SVN version (doesn''t matter), but on some files, file_column will create 0kb files. The tmp directory will contain the correct file size, and I copied the temp over the 0kb file, and then it