similar to: On Fedora, kernel update resets /var/run/asterisk owner to root.root

On 12/02/2014 02:46 PM, Jeffrey Ollie wrote: > On Tue, Dec 2, 2014 at 1:22 PM, sean darcy <seandarcy2 at gmail.com> wrote: >> >> Or do I >> find a new place to put asterisk.pid? > > Also, if you use the native systemd unit file, you no longer need a > PID file, although you still need /run/asterisk to store the control > socket. > So systemd is taking

On Tue, Dec 2, 2014 at 1:22 PM, sean darcy <seandarcy2 at gmail.com> wrote: > > Or do I > find a new place to put asterisk.pid? Also, if you use the native systemd unit file, you no longer need a PID file, although you still need /run/asterisk to store the control socket. -- Jeff Ollie

hey folks, we are migrating our tomcat setup over to centos 7. Im converting init-scripts over to systemd services and whatnot.. One thing that Ive noticed is that my systemd startup script cant seem to write to /var/run as a non-root user to drop a pidfile.. If I create a directory in /var/run owned by my user, it gets wiped out on reboot. Ive searched and found this

Commit a6330e9d3af0f5286f1d53d909fd868387b67f69 enabled /run for systemd-tmpfiles: while this works fine in most of the cases, there are few tmpfiles configurations that still references /var/run instead of /run. As result, include also /var/run in the systemd-tmpfiles execution. --- appliance/init | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/appliance/init

I'm running asterisk 16 on Fedora 31. If I start asterisk as user asterisk, all goes well. But if I start asterisk from systemd: asterisk[1411]: [Jan 21 19:36:47] ERROR[1411]: res_sorcery_config.c:320 sorcery_config_internal_load: Unable to load config file 'pjsip.conf' Jan 21 19:36:47 asterisk.riverside asterisk[1411]: [Jan 21 19:36:47] ERROR[1411]: config_options.c:710

We have a 10.10.0.0 internal network. The asterisk server - 10.10.10.180 - has a PRI connection to a T-1. Another server is the router to the internet. All phones in the office and the workstations are on the network. Most of the internal phones are aastra 9133i's. Here the network config from a phone: Network Settings Basic Network Settings DHCP [ ]

On 10/13/2017 10:19 AM, Anand Buddhdev wrote: > .. > Stop trying to force a square peg into a round hole. Whee, I just _know_ I'm going to be positively skewered (and maybe even plonked!) for this.... but, hey, it's Friday, and this post is meant to be a bit funny.? So lighten up, and enjoy a short read. obHumor: I actually have a piece of furniture (a small table) with square

On 08/29/2018 09:42 AM, Carlos Rojas wrote: > Hi > > Probably somebody is trying to hack your system, you should block that > ip on your firewall. > > Regards > > On Wed, Aug 29, 2018 at 9:34 AM, sean darcy <seandarcy2 at gmail.com > <mailto:seandarcy2 at gmail.com>> wrote: > > I'm getting invites to very high ports every 30 seconds from a

Have you enabled DTMF logging and seen the DTMF codes being recognised by Asterisk? I had a bunch of soft phones that I had to change to using ?sip info? for the DTMF signalling as the RFC signalling was not always being recognised. This would cause transfers to appear as if the user had not dialled any digits. On 20/12/2014 20:52, "sean darcy" <seandarcy2 at gmail.com> wrote:

I'm trying to allow access to the office from home. But the ip provider (cablevision) blocks udp 5060. I can see the register packets leaving on wireshark, but nothing received by office. Changed to port to 6111 and now the packets show up. In the server I've set port=6111 in the device in sip.conf, but * is NOT listening for 6111: netstat -an | grep 5060 tcp 0 0

On 08/29/2018 11:59 AM, Telium Support Group wrote: > Block a single IP is the wrong approach (whack-a-mole). You should consider a more comprehensive approach to securing your VoIP environment. Have a look at this wiki: > > https://www.voip-info.org/asterisk-security/ > > > > -----Original Message----- > From: asterisk-users [mailto:asterisk-users-bounces at

I'm trying to move the asterisk server to an Amazon Web instance. We have teliax for our sip provider. I'd like for our DID lines to be connected to a users cell phone. Seems simple enough, but I'm getting the dreaded one-way audio, even with nat=yes everyplace I can think of. The dialplan is real easy: [from-teliax-sip] exten => _j.,1,NoOp("From teliax sip with exten

opusdec -V opusdec opus-tools f2a2e88 (using libopus unknown) I've got an opus file encoded from a .wav off a cd, 44100Hz: opusinfo 2-24-Overture_in_C_\(In_Memoriam\).opus Processing file "2-24-Overture_in_C_(In_Memoriam).opus"... New logical stream (#1, serial: 38134f1f): type opus Encoded with libopus unknown User comments section follows... ENCODER=opusenc from opus-tools

I'd like to have an extension "join" a call. That is, C can join A and B, just as if it were an analog extension phone. ChanSpy works, sort of. The problem is that once A or B hangs up, the channel is gone. With an analog extension, C would remain connected with B if A hung up. Can I throw A and B into a confbridge and then add C? Create a new channel that grabs the A

On 12/19/2014 09:42 AM, Rusty Newton wrote: > On Wed, Dec 17, 2014 at 1:09 PM, sean darcy <seandarcy2 at gmail.com> wrote: >> I've got a confbridge set up which works if dialed locally: >> >> -- Executing [266 at internal:1] Answer("DAHDI/1-1", "") in new stack >> -- Executing [266 at internal:2] SendDTMF("DAHDI/1-1",

I'm getting invites to very high ports every 30 seconds from a particular ip address: Retransmitting #10 (NAT) to 5.199.133.128:52734: SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 0.0.0.0:52734;branch=z9hG4bK1207255353;received=5.199.133.128;rport=52734 From: <sip:37120116780191250 at 67.80.191.250>;tag=1872048972 To: <sip:3712011972592181418 at 67.80.191.250>;tag=as3a52e748

On 12/21/2014 11:09 AM, sean darcy wrote: > On 12/21/2014 04:42 AM, Patrick Beaumont wrote: >> Have you enabled DTMF logging and seen the DTMF codes being recognised by >> Asterisk? I had a bunch of soft phones that I had to change to using ?sip >> info? for the DTMF signalling as the RFC signalling was not always being >> recognised. This would cause transfers to appear

My asterisk server is in the cloud. Figuring out how to send an email is too much brain damage. So i can't use the email feature that's built into voicemail. What I want to do is execute a remote command with the voicemail as an argument. The remote machine command would email the message. I'm thinking of: same =>n,VoiceMail(vm,u) same =>n,System(ssh myserver "emailVM

On Wed, Oct 29, 2014 at 7:10 PM, sean darcy <seandarcy2 at gmail.com> wrote: > On 10/29/2014 08:06 PM, Matthew Jordan wrote: > >> On Wed, Oct 29, 2014 at 5:16 PM, sean darcy <seandarcy2 at gmail.com> wrote: >> >>> Can we expect a SILK codec for 13 ? Or does the one for 12 work for 13? >>> >>> >> codec_silk for Asterisk 12 will most

I wonder if I could have that patch, maybe I could add it to my fail2ban regexp and if you have the correct regexp, I would apperciate that as well. Thanks. On Wed, 29 Aug 2018 19:18:29 -0400, Telium Support Group wrote: > > Depending on log trolling (Asterisk security log) misses a lot, and also depends on the SIP/PJSIP folks to not change message structure (which has already happened