similar to: CentOS5, kernel update and 3ware driver

Have a look at these pages: http://www.bofh-hunter.com/2008/06/13/3ware-performance-in-centos/ https://bugzilla.redhat.com/show_bug.cgi?id=444759 I'm comparing the default 5.1 64bit kernel with the patched one posted in the bug report (kernel-2.6.18-53.1.21.el5.bz321111.x86_64) and I don't quite see any significant difference in write performance for this command: dd if=/dev/zero

I need a SATA RAID PCI card that works well with CentOS and is fully supported. Mandatory features: - works with the drivers already in the kernel, no additional drivers - can do RAID 0, 1 and 5 - hotswap - allows to monitor the status of the array and of each individual drive via a script (ideally run from cron) - works with very large SATA drives Nice to have features but not mandatory: -

I've been having no end of issues with a 3ware 9650SE-24M8 in a server that's coming on a year old. I've got 24 WDC WD5001ABYS drives (500GB) hooked to it, running as a single RAID6 w/ a hot spare. These issues boil down to the card periodically throwing errors like the following: sd 1:0:0:0: WARNING: (0x06:0x002C): Command (0x8a) timed out, resetting card. Usually when this

Let's say I want to use a much newer kernel - even one from the future, such as the upcoming 2.6.24. :-) What would y'all smart folks do in this case, in order to avoid any possible nasty consequences? Would you import the config file from the original CentOS5 kernel into the new kernel, and let the kernel deal with the differences? I.e. have the old configuration as some sort of

I want to build a dedicated MythTV box using CentOS5. I need a lightweight desktop environment, something extremely simple that does not use much memory. Gnome and KDE use way too much memory and are too complex for what I want to do. The system will login automatically to a certain account after booting up. After the automatic login, it will start immediately the MythTV frontend full-screen.

On 2015-04-14 11:25, Gordon Messmer wrote: > On 04/14/2015 11:07 AM, Florin Andrei wrote: >> I looked in the yum repositories for CentOS 7 and I noticed that there >> are no packages for any of the major open source IPSec VPN apps - >> Openswan, strongSwan, etc. I'm pretty sure CentOS 6 had Openswan >> packages. > > libreswan replaced openswan, and is

On 2015-04-14 11:44, Eero Volotinen wrote: > 2015-04-14 21:40 GMT+03:00 Florin Andrei <florin at andrei.myip.org>: >> >> http://serverfault.com/a/655752/24406 >> >> If that is accurate, the documentation, and the clustering / load >> balancing might tilt the balance in the direction of strongSwan. >> >> > Well, both packages can do ipsec to

I just received a Wildcard TDM400P by FedEx yesterday. I noticed that the FXO/FXS modules use connectors similar to Ethernet. Now, i want to connect the TDM400P to the PSTN connector in the wall, and also to a regular analog phone. Both the PSTN conn and the phone use smaller connectors, typical for analog phones. I searched the "official" docs and the Wiki, there's good

If your Perl apps are unusually slow on CentOS 5, have a look at this blog: http://blog.vipul.net/2008/08/24/redhat-perl-what-a-tragedy/ In a nutshell: some Perl apps are 100x slower on RedHat / CentOS 5 compared to other distributions. Bugzilla entry: https://bugzilla.redhat.com/show_bug.cgi?id=379791 -- Florin Andrei http://florin.myip.org/

I looked in the yum repositories for CentOS 7 and I noticed that there are no packages for any of the major open source IPSec VPN apps - Openswan, strongSwan, etc. I'm pretty sure CentOS 6 had Openswan packages. What is the current consensus w.r.t. building an IPSec VPN "server" (concentrator, whatever) on CentOS 7, that will do site-to-site connections with Cisco hardware at

I've two machines with almost identical hardware (slightly different CPUs). The SATA/RAID controller is SiI 3114. One of the servers was installed a while ago by someone else, it's running Fedora Core 5 and RAID is enabled: # df -m Filesystem 1M-blocks Used Available Use% Mounted on /dev/dm-6 125931 2990 116441 3% / /dev/dm-1 99

http://yro.slashdot.org/article.pl?sid=04/08/04/2212251&tid=158&tid=95&tid=103 Probably some of you already saw this. Now, beyond discussions regarding the legitimacy of such a ruling (whether they have the legal, moral or whatever right to enforce it), there's the technical aspect. Suppose i provide VoIP services using Asterisk, and i fall under the incidence of the FCC ruling

CentOS 7 How do I print something on the text-mode console right after the OS has finished booting? I've a virtual instance and I need to know its IP address after it has finished booting up, to know where to ssh into it. I've tried adding "ip -4 addr > /dev/tty0" to rc.local, but that obviously doesn't work, because the login prompt overwrites everything I do. --

Is it possible to add caching to a pipe? cat blah | in_RAM_cache_here -s SIZE | something else I'm doing what is essentially a cat (*) from a DVD directly to an NFS share. It looks like the two media (DVD and NFS) have very different read / write behaviors, speeds and timings, and the overall process is not as fast as possible. So I was wondering if some kind of cache inbetween might be

I will install Asterisk on my home server, I want to be able to route video calls, but I need the Windows and Linux clients to be interoperable. On Linux, it looks like Ekiga is a good candidate. But how about Windows? Anyone using Kapanga in an Asterisk network that includes Ekiga? Are these two interoperable? I'm not necessarily looking for open source software, free for personal use is

I'm a Thunderbird user almost since day one, but now I'm looking for something else. For whatever reason, it doesn't work well for me - every once in a while it becomes non-responsive (UI completely frozen for several seconds, CPU usage goes to 100%) and I just can't afford to waste time waiting for the email software to start working again. My main desktop platform is Linux,

So, my favorite RPM repository (EPEL) only has the ancient nagios-2.12 or so. What's the repo you use for Nagios 3? -- Florin Andrei http://florin.myip.org/

# 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-14-server x86_64 Ubuntu 9.04 Here's the situation: I have several local clients (Thunderbird) which do not use TLS at all. It's plaintext completely, on port 143, because the connection is local and there are no unauthorized users on this network (it's a home network). I want to keep it that way to keep things simple. Tools /

I'm doing some experiments with GlusterFS. Most documents online suggest to install the glusterfs-package as if it was available directly in the repo, and therefore installable via a simple "yum install". Unless I'm wrong, it appears that this package is not in the repo for CentOS 6. Does anyone know what happened to it? -- Florin Andrei http://florin.myip.org/

I'm looking for a way to give VoIP capabilities to an existing PBX: it's made by Mitel and it's used in a small/medium environment (a few dozen phones, but the PBX has capabilities for up to 200, if i remember correctly). Any high-level guidelines on how to integrate Asterisk with a PBX that's already in use? Probably that particular PBX is not supported directly, but are there