similar to: ^C doesnt work on ssh session

I setup a ssh chroot jail following this[1] guide. It works for my user to login, use ls and use scp which is all I really want. I do have a problem I cannot solve: when connected and navigating the filesystem, the backspace key actually moves the cursor forward and does not delete what I type. I may have found a hint from some googling that readline will read in /etc/inputrc on login but if

I have a new APC Smart-UPS SUA2200RM2U. I've had no success with the manufacturer's PowerChute software and smart signaling, so I have decided to try NUT. The smartups driver can't make contact through the serial port. Since this is rack-mounted, it comes with a 940-1524 serial cable. As far as I can tell, this is supposed to work with smart signaling. Here's my ups.conf:

Hi, I'm having issues connecting Garmin GPS 18 to COM1 on 9.1, I get nothing but silence. Identical setup works absolutely fine with Linux. I've got PPS wire connected to DCD, but that seems to make no difference on Linux, so I presume it shouldn't affect fbsd either. On Linux, I get: $ uname -a Linux ubuntu 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64 x86_64

When running R from the terminal on Linux (Ubuntu 16.04), it core dumps whenever / wherever I press Ctrl-4 or Ctrl-\. You get thrown back to the terminal with "Quit (core dump)" being the only message. Grepping the R source code, it doesn't look like that message is generated by R itself. Over on Twitter, it has been confirmed to also happen on macOS. $ R -d valgrind --vanilla

Hello everyone, recently I've found something I consider a bug. Correct me if I'm wrong, but I always thought that Linux' EOL is 0x0A. Imagine my surprise when I saw that all messages that are being output on to the stderr (on any Linux I've tested - Fedora and Ubuntu) are terminated with 0x0D, 0x0A. Maybe that's standard behaviour of all stderr messages in all Linux

Hey, I''ve installed Xen 3.0 on a freshly installed Debian Sarge. dom0 is working nicely (kernel 2.6.12.6-xen0). Then I created a domU, again with Debian Sarge, booting Xen''s vmlinuz-2.6.12-xenU. Unfortunately ctrl-c does not work in the domU''s console, neither if I create the domU with "xm create -c ..." nor if I attach to it later. It doesn''t matter

I compiled OpenSSH 3.6.1p1 on NCR MP-RAS v4.3 (or at least "uname -a"'s output of 4.0.3.0 suggests v4.3, I'm not positive). I was able to compile zlib (1.1.4) and openssl (0.9.7a) with little trouble. OpenSSH took hand-hacking the includes.h file as follows: diff -cr openssh-3.6.1p1/includes.h openssh-3.6.1p1-customized/includes.h *** openssh-3.6.1p1/includes.h Sun Oct 20

Thanks for these explanations - it all makes sense, that is, the default behavior for a process that does not capture SIGQUIT is to quit and perform a core dump (https://en.wikipedia.org/wiki/Unix_signal#SIGQUIT). Then the remaining question, as Luke says, is: should R handle this signal? For instance, in interactive mode, SIGQUIT could maybe bring up: Possible actions: 1: abort (with core

Hi Charles; I tried both of your suggestions: 1) run stty -f /dev/cuaU0 raw jusbefore running solis 2) Unplug/plug, and run solis right after. The problem still persists. [~]>stty -a -f /dev/cuaU0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc

Thanks Ben. i am checking in linux. I do have this command working: ssh localhost -o password=abc123 SSH started with password Could not create directory '/root/.ssh'. Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,password,keyboard-interactive). will try to getback on openssh used. But is it possible to show some pointers for my

Turns out another user reported the same issue with a slightly different model: https://github.com/networkupstools/nut/issues/231 <https://github.com/networkupstools/nut/issues/231> The "stty -f /dev/cuaU0 raw" trick should help, but I am confused as to why FreeBSD has different "raw" settings than what is set up at the same time as the baud rate:

We are in the process of migrating one of our embedded apps to use uart by default instead of sio in RELENG_7 in prep for the day when sio eventually disappears. Unfortunately, the application doesnt want to work with uart with puc backed devices, but still works with sio. Stranger still, the app works with the uart driver when uart attaches to the built in com port on the isa bus. However,

Im trying to run this program called Thinkboxx and wen it tryes to comunicate over the comm port it hangs. Here are som output to read. earlier on i get: Call kernel32.VirtualAlloc(43050000,00001000,00001000,00000004) ret=0058557c Ret kernel32.VirtualAlloc() retval=43050000 ret=0058557c thats from vhere the com port gets an virtual memory space, i think. and in the end i have: Call

Thanks somuch. I am checking it. Best Regards, On Tue, Jul 18, 2017 at 9:08 PM, Reuti <reuti at staff.uni-marburg.de> wrote: > > > Am 08.07.2017 um 18:41 schrieb Sudarshan Soma <sudarshan12s at gmail.com>: > > > > Hi , > > I have the following requirement . > > other than following users, any other user sshd connection should be > > redirected

On Wed, 2018-01-03 at 13:50 +0530, Sudarshan Soma wrote: > HI, I do see some refernce on it: but seems not closed > https://marc.info/?l=secure-shell&m=115513863409952&w=2 > > http://bugzilla.mindrot.org/show_bug.cgi?id=1215 > > > Is this patch available in latest versions, 7.6? No. It never was. The SSSD is using NSS (Name Service Switch) [1] way of getting

Hi, Can I send ssh request to sshd to prompt for username along with password. Ex: cogan at localhost$ ssh myserver Login:xyz password: Login is automatically taken as cogan, wanted to ignore this and instead prompt login and take it from user, Please suggest. Best Regards,

Hi , I have the following requirement . other than following users, any other user sshd connection should be redirected to 2024 instead of port 22. root, ftp, guest So ssh root at ip // should be sent to sshd running at port 22 ssh otheruser at ip // should be sent to sshd running at port 2024 I know that we can do something like this: ssh -o ProxyCommand='ssh -W localhost:2024 cliuser

+ added subject On Mon, Jan 30, 2017 at 11:32 PM, Sudarshan Soma <sudarshan12s at gmail.com> wrote: > Hi, > I am trying to give access to sshd port 22 to connect to different port > 1023 by differentiating with special user, customuser. Following is how i > tried, but it doesnt work, please suggest. > > outside, user issues command > ssh customuser at ip, it fails >

Hi I am trying to write pam_radius module which talks to RADIUS server for aaa. I see sshd checks /etc/passwd for user list. Since RADIUS server has user list, can sshd ignore this check for RADIUS/TACACS+ authentication, Please suggest if there are any flags to control it. I am using the following versions. OpenSSH_6.6p1, OpenSSL 1.0.2n 7 Dec 2017 I see sssd (NAS) being used for such use

Hi, We would like to use openssh in fips mode. It looks it is not provided as a configurable option through sshd_config, Are there plans to do incorporate such change. Do we have to change openssh code for now until the option is provided. If sshd is operating in fipsmode, does it provide additional errors/audits to indicate failures such as pair wise consistency failed during on of the sshd