similar to: USB setup

Good afternoon, I am trying to communicate with a new Tripp-Lite UPS via usb and having little luck. After more than a week on this I've decided to ask for help. I am very inexperienced at posting information to message boards, so hopefully I'm doing this right. I assume this is the correct place to post this message. I will start with the equipment I have. I am using Debian Sarge

Hi all: I am trying to get a TrippLito OMNI1000LCD working with nut. Even with the development branch, I get the following.... upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: HID UPS driver 0.13 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. Detected Tripp Lite TRIPP LITE UPS on port /dev/usb/hiddev0

Greetings, I imagine this question must have been answered previously on the list, but I can't search for the answer because the archives are gone. Executive summary: I am trying to install and configure nut 2.0.1 on Fedora Core. I have a SmartUPS Pro plugged into a USB port. Upsmon is logging "UPS myups@localhost is unavailable" to syslog and via wall when it starts up and

Hi Klaus, Thanks for your much appreciated feedback. Klaus Holler wrote: > Hello, > >I just wanted to report that the Back-UPS RS 800 works with the >Network UPS Tools. Currently I use the following (Ubuntu breezy) >debian packages on kernel 2.4.31: >ii nut 2.0.2-1build1 >ii nut-usb 2.0.2-1build1 > >lsusb reports: >ID 051d:0002 American Power Conversion Back-UPS Pro

To try and work through the initial drops, I repeated the previous steps that worked on the physical machine on the CentOS 7.6 virtual machine. The drops continued to occur, but it seems that the driver always reconnects. My initial inclination is to work through and see at what point I get the drops to stop, and I think I will do that next (inputs welcome). From a standpoint of “how much does

Updates on this: 1) Making progress in the related Dev list thread here: https://alioth-lists.debian.net/pipermail/nut-upsdev/2019-June/007440.html I’ll keep that thread up to date with progress as I go. But if there are specific things it would make sense to test here, just let me know. Otherwise, I figure reducing redundancy makes sense? 2) I tried disabling usbcore.autosuspend, but

Hi Patrick, I didn't get further bug reports from you, so I have now listed your device as "supported" by newhidups. Last I saw as of your below message, the driver was working as expected. If there are any future problems, let me know! -- Peter Patrick Nolan wrote: > > Remember me? Back in May we exchanged some messages about my Tripp-Lite > UPS. My boss has gone on

I recently purchased a CyberPower 800AVR UPS which I'm trying to use over USB with my PC (ArchLinux 0.7.2 [aka up to date]) and nut 2.0.3. Following the setup instructions, I have an entry as follows in /etc/nutups/ups.conf (where I chose the configuration file to go when building nut): [MyUPS] driver = cyberpower port = /dev/bus/usb/004/007 desc = Workstation

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

I have an older system which has a simple APC Back-UPS ES 500 connected via USB. I built nut 2.0.2 from source and am attempting to get it to work. I had to manually create the device links and I think it's ok because hidups is recognizing the UPS but any attempts to read data from it fail: [root@server bin]# ./hidups -D -D -D /dev/usb/hid/hiddev0 Network UPS Tools: HID UPS driver 0.13

Joel Peshkin wrote: > > I hacked in the following additonal changes... > > Index: newhidups.c > =================================================================== > RCS file: /cvsroot/nut/nut/drivers/newhidups.c,v > retrieving revision 1.1.1.1.8.6.2.21 > diff -u -r1.1.1.1.8.6.2.21 newhidups.c > --- newhidups.c 7 Nov 2005 22:14:20 -0000 1.1.1.1.8.6.2.21 > +++

On Mon, Jun 17, 2019 at 6:10 PM David Zomaya <David_Zomaya at tripplite.com> wrote: > Hi Network UPS Tools Support, > > > > I’m not sure if this is a question for the “user group” or the developer > group”. > > > > My name is David Zomaya and I work at Tripp Lite in our technical support > department. Copied on this email are Eric Cobb from our Product

I here is some information I could have provided previously. Here is what I am seeing: ==================================================================== Broadcast message from nut at localhost.localdomain (Fri May 13 22:31:35 2016): UPS myups at localhost on battery upsc myups at localhost battery.charge: 3 battery.charge.low: 10 battery.charge.warning: 30 battery.runtime: 93

I have just compiled and installed nut-2.4.1 and I get the following errors when I try it: There is no difference if I run it as root or normal user. Any help would be appreciated. # usbhid-ups -DDD -a SMART1000LCD Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '3' upsdrv_initups... Checking device (1D6B/0002) (001/001) libusb

Hi Greg, I haven’t but I will give that a shot later this week and advise. Thanks for the tip. Thank you, David Zomaya Technical Support [cid:image007.png at 01D525AF.B38D63F0] 1111 W. 35th Street | Chicago, IL 60609 USA 773.869.1156 | david_zomaya at tripplite.com [cid:image008.png at 01D525AF.B38D63F0]<http://www.tripplite.com/> From: Nut-upsuser

Hey, was wondering if I could get a quick sanity check. We have a SmartUPS 1500 RM2U which we have connected to a box via USB. It seems like every 40-45 seconds it becomes disconnected and reconnected. Though this only happens when we have NUT enabled, otherwise it's fine. When it is disconnecting and reconnecting running lsusb doesn't show it disconnecting. After having it sit like that

Hi I have a Tripp lite smartusb550 using fedora 3 (2.6.12-1.1381_FC3smp). Managed to establish communication with the ups using the tripplite_usb driver but get the following errors Any help to make it work will be appreciated cheers Julio -----------------------------------------------------------------------------------------------------------------------------------------------------

Hi Charles, I made the change, and it still won't incite a poweroff: ========================================================================== [root at localhost ~]# upsc myups at localhost battery.charge: 76 battery.charge.low: 90 battery.charge.warning: 30 battery.runtime: 1811 battery.temperature: 31.9 battery.type: PbAC battery.voltage: 49.2 battery.voltage.nominal: 48.0 device.mfr:

As I understand it from looking through the archives of this mailing list and the source for the driver, tripplite_usb should work for this device. I tried to go through the source as best I could to see if I could add support myself, but got a bit lost. Anyhow, here's hoping that someone has some experience with this model. My system is using the latest CVS checkout of the Development branch

i just purchased a tripp lite OMNIVS1500XL and have been attempting to get it working with the usb drivers since it doesn't have a serial port. it hasn't been anywhere near successful and i was hoping someone might be able to point me in the right direction. i run gentoo and this is what i currenlty have installed: nut 2.0.2 libusb 0.1.10a (gentoo modified) usbutils 0.11-r5