similar to: Belkin unk ups

On Oct 12, 2014, at 8:28 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Its unk because whats plugged in seems to be blocking the rear name plate. > About all I can recall is that its big, 3 battery unit, rated somewhere > north ob 1250 VA. > > Its an 050D:0751 Belkin. > > What driver should I use, and what file is that set in? Looks like it is in usbhid-ups. If

On Tuesday 14 October 2014 08:19:02 Charles Lepple did opine And Gene did reply: > usbhid-ups Added that, but only get this at "sudo service nut start" gene at coyote:/etc/init.d$ sudo service nut start * Starting Network UPS Tools [ OK ]

Greetings Charles; Following the chapter 6, configuration notes, and having configured everything I had done previously in the repo built /etc/nut directory without any success previously, I found when trying: /usr/local/ups/upsdvrctl start, It reported it couldn't open /usr/local/ups/etc/ups.conf So I copied what I had done before to that path by mv'ing them with mc. Then I checked

On Nov 11, 2014, at 9:41 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Can't claim USB device [050d:0751]: could not detach kernel driver from > interface 0: Operation not permitted > Driver failed to start (exit status=1) > > In /dev/ttyUSB0 is owned by root. /dev/usb/hiddev3, the last one, has a > slow data marching out of it if I sudo cat /etc/dev/usb/hiddev3

Greetings; I found pdf user manual which explains a few things that might help. However, for a ubuntu flavor, the various .conf etc files seem to be in /etc/nut. But this pdf says they are in /usr/local/ups/etc, and yes indeed there are some there, with the .sample files being owned by root, and the rest are user 503, whoever he may be. Are these just a sample storage in case one needs to

Hi Gene, On Oct 18, 2014, at 7:35 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Greetings; > > I found pdf user manual which explains a few things that might help. > > However, for a ubuntu flavor, the various .conf etc files seem to be in > /etc/nut. We have an open ticket about that[*]; basically, the official NUT documentation needs to be a bit more explicit

Hi Charles; I had nut working from before, but managed to lock up something and had to reboot. Nut is in the stuff to start at boot time, but is not now capable to being restarted with the nut script in /etc/init.d, claiming it is disabled: gene at coyote:/usr/src/nut-2.7.2/docs/man$ sudo service nut start * nut disabled, please adjust the configuration to your needs * Then set MODE to a

Hi Charles; I think its not working yet even though I seem to be getting only one error, but I cannot seem to get upsmon to output the current ups status. So, since I cannot find any manpages (is that a separate package, if so I did not see it in the repo.) about the only error I can get out of it is that it is not listening on localhost:3493. Yet that is specified in the conf files: ene

Greetings all; Back to a thread I started back in May of 2008 I think. I never did get this belkin and nut to talking, so I thought I'd make another run at it. Trying to run the driver as the user gene, I'm getting this: --------------------------- [root at coyote ups]# su gene -c "/sbin/belkin -D -a myups" Network UPS Tools - Belkin Smart protocol driver 0.21 (2.2.2) debug

Greetings; I have the newest nut (nut-2.2.2-4.fc10.i386) from fedora 10 repos) installed and this ups (from lsusb -vv): Bus 001 Device 006: ID 050d:0751 Belkin Components Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

On Dec 1, 2014, at 9:43 AM, Gene Heskett <gheskett at wdtv.com> wrote: > Hi Charles; > > I had nut working from before, but managed to lock up something and had to > reboot. Nut is in the stuff to start at boot time, but is not now capable > to being restarted with the nut script in /etc/init.d, claiming it is > disabled: > > gene at

On Sunday 19 October 2014 22:03:23 Charles Lepple did opine And Gene did reply: > Hi Gene, > > On Oct 18, 2014, at 7:35 PM, Gene Heskett <gheskett at wdtv.com> wrote: > > Greetings; > > > > I found pdf user manual which explains a few things that might help. > > > > However, for a ubuntu flavor, the various .conf etc files seem to be > > in

On Sunday 19 October 2014 22:03:23 Charles Lepple did opine And Gene did reply: > Hi Gene, > > On Oct 18, 2014, at 7:35 PM, Gene Heskett <gheskett at wdtv.com> wrote: > > Greetings; > > > > I found pdf user manual which explains a few things that might help. > > > > However, for a ubuntu flavor, the various .conf etc files seem to be > > in

Hi Charles; I hope this finds you well. Here is dmesg output: gene at coyote:~$ dmesg |grep Belkin [ 3.315667] usb 2-3: Product: Belkin UPS [ 3.315669] usb 2-3: Manufacturer: Belkin [ 4.084258] generic-usb 0003:050D:0751.0009: hiddev0,hidraw4: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.0-3/input I have configured it to use this generic-usb, and probably made it less

On Sun, Mar 1, 2015 at 2:23 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Hi Charles; I hope this finds you well. Hi Gene, > Here is dmesg output: > gene at coyote:~$ dmesg |grep Belkin > [ 3.315667] usb 2-3: Product: Belkin UPS > [ 3.315669] usb 2-3: Manufacturer: Belkin > [ 4.084258] generic-usb 0003:050D:0751.0009: hiddev0,hidraw4: USB HID v1.11 Device

On Sunday 12 May 2019 02:41:02 pm Charles Lepple wrote: > /lib/nut/usbhid-ups -a myups -DD gene at coyote:~$ /lib/nut/usbhid-ups -a myups -DD Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 Can't open /etc/nut/ups.conf: Can't open /etc/nut/ups.conf: Permission denied lemme see who owns that. huh? amandabackup:nut what the h? Who is supposed to own

I'm setting up a cluster with multiple ups's using nut 2.2. The ups's are Belkin 1500 (ID 050d:0751) which don't appear to report a serial number. Is there any other way I can setup ups.conf with multiple of these ups over usb on Linux? If I just setup the vendor and product id's, every definition in ups.conf appears to match the first one, and therefore all of them but

Hi Gene, On Oct 21, 2014, at 9:12 PM, Gene Heskett <gheskett at wdtv.com> wrote: >> configure: error: libgd not found, required for CGI build >> >> And gdlib does not appear to be available from the repo's. > Sorry, I must have missed that message. This is still with Ubuntu 10.04, right? http://packages.ubuntu.com/source/lucid/nut lists the build dependencies,

On Thursday 01 January 2015 08:36:40 Robert Blayzor did opine And Gene did reply: > On Jan 1, 2015, at 8:10 AM, Stephan Bosch <stephan at rename-it.nl> wrote: > > Could you enable mail_debug? That should show why it is trying to > > recompile the Sieve script. > > Well, that it does! And it's saying the script is "not up to date" and > tries to

On Tuesday 21 October 2014 22:06:48 Charles Lepple did opine And Gene did reply: > Hi Gene, > > On Oct 21, 2014, at 9:12 PM, Gene Heskett <gheskett at wdtv.com> wrote: > >> configure: error: libgd not found, required for CGI build > >> > >> And gdlib does not appear to be available from the repo's. > > Sorry, I must have missed that message.