similar to: New Tripplite UPS: INTERNET350U

Hello Charles, Thank you for your suggestion, however it didn't help. I was running it as root but I went ahead and added the -u root anyways. Nothing changed. So part or all the problem is that I don't have the "libhidups or libhid.usermap" files that the man page talks about: You also need to install manually the legacy hotplug files (libhidups and libhid.usermap,

On Jun 13, 2014, at 4:45 PM, Bossard wrote: > No matching HID UPS found > > > Driver failed to start (exit status=1) > > > So I tried 'usbhid-ups -x productid=2010' and received the same error. Same exact error? I suspect it's a permissions error the second time. Add "-u root" to the command line - since this was not a known VendorID:ProductID pair

On Jun 21, 2014, at 10:21 AM, Bossard <ebossard at gmail.com> wrote: > On Sun, Jun 15, 2014 at 10:19 AM, Charles Lepple <clepple at gmail.com> wrote: >> usbhid-ups -u root -x productid=2010 -DD -a <UPS-name> > > Hello Charles, > > Sorry it took me so long to post: > > (The output of:) /lib/nut/usbhid-ups -u root -x productid=2010 -DD -a tripplite

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

These patches allow this device to function in nut.. diff --git a/trunk/drivers/tripplite-hid.c b/new/drivers/tripplite-hid.c index c36da98..dddd13c 100644 --- a/trunk/drivers/tripplite-hid.c +++ b/new/drivers/tripplite-hid.c @@ -71,6 +71,8 @@ static usb_device_id_t tripplite_usb_device_table[] = { { USB_DEVICE(TRIPPLITE_VENDORID, 0x2005), battery_scale_0dot1 }, /* e.g. TrippLite

Just a little tiny detail : ============================================================================== > --- trunk/scripts/hotplug/libhid.usermap (original) > +++ trunk/scripts/hotplug/libhid.usermap Fri Aug 25 19:18:19 2006 > @@ -21,5 +21,7 @@ > libhidups 0x0003 0x09ae 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00

--zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable I'm trying to set up a TrippLite Internet Office 750 just like this guy: http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-June/000007.html Here's the output of a few interesting commands stuart@tyro:~+ dpkg-query -l nut nut-usb| tail -n2| awk

Hey all, I am trying to use NUT for a Tripplite Smart1200 LCD on a fresh copy of Debian 6.0.2.1. I installed NUT version 2.4.3 and I have pored through pages and pages of other posts, but for the life of me I can not get it to recognize the Tripplite. I know its an 09ae:2009 device and I've tried to add a rule in /lib/udev/rules.d/52-nut-usbups.rules as according to some posts, but to no

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

Hello, For a while I have been running NUT 2.0.0 just fine with my APC Back-UPS RS 800 using the usbhid interface. I decided to upgrade to 2.0.2, and all went well (upsc and upsd/upsmon seem happy to talk to the UPS), but I am getting a ton of these messages in my syslog: Jul 6 17:12:45 yggdrasil kernel: usb-uhci.c: interrupt, status 3, frame# 780 Jul 6 17:12:50 yggdrasil kernel:

Hello, I am try to get my "new" UPS running with NUT on my OpenMediaVault device but only receive error meassages on several configurations I try. Your support is really appreciated for getting it solved. Best Regards, Olaf *lsusb* Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID

Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says this T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06da ProdID=0002 Rev= 0.01 S: Manufacturer=POWERWARE S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = tripplite_usb Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone Iget the following error when using the > sudo upsdrvctl start Network

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

I'm read through the archives trying to figure out how to get a Tripplite SmartPro SLT 1500 configured with NUT using the USB interface (it also has a serial interface but I'd rather not). The thread which this link belonged to seemed most instructive: http://lists.alioth.debian.org/pipermail/nut-upsdev/2007-January/001656.html and I followed it as best I could. I'm running a

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS