similar to: Formalizing the end of the relationship with Eaton

On 15/02/14 19:56, Arnaud Quette wrote: > Dear NUT users, > > The relationship with Eaton was in need of clarification for a long > time, which happened over the past weeks.This is now officially noted > on the NUT side, through moving Eaton from the "Main supporter" to > "Supporting UPS manufacturer", rewording the content and putting a big > warning

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > On

The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. You can get the comm spec for XCP from the nut site if you want to delve deeper. I'd give more specifics, but am out of town and only working from memory at the moment . . . - Tim On

On Feb 15, 2014, at 6:46 PM, Greg Vickers wrote: > Thanks! I've attached the file to this email (bcmxcp_usb.output2014160926.gz), it ran for 12 seconds, and looks like it's looping by that time. I'm not sure what to look for, does grepping for 'Yes' show the variables that the driver can pull off this UPS? The boolean variables seem to be indicated by "Yes". I

On 16/02/14 00:38, Charles Lepple wrote: > On Feb 15, 2014, at 2:57 AM, Tim Dawson wrote: >> The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. > Tim: spot on. > > Greg, > > If you want, you can capture the -DDDD output

Hello guys, I have to manage an Eaton Ellipse ASR 750 VA UPS under a FreeBSD 8.2 server. I used nut from ports collection but I'm unable to detect the UPS by USB cable. Here is the output of 'usbconfig -u 4 -a 2 dump_device_desc' : ugen4.2: <ELLIPSE EATON> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110

Hello I recently bought a small UPS by Eaton (Ellipse ECO 800) in order to prevent my btrfs-fileserver (running Debian 12 Bookworm 12.4 from shutting down abruptly while writing something important during a power loss. I am using the version 2.8.0.7 provided by Debian. I have found very gooddocumentation on how to set up the UPS and the services on the server connected to it. Unfortunately

Hello, I have trouble connecting to an Eaton 5PX UPS via the usbhid-ups driver. It is supposed to be fully working according to the compatibility list (support level 5). OS: A fresh Debian stable install. Then changed the apt source to unstable and did "aptitute update" and "aptitude install nut". Nothing else. I did that, because the "unstable" package is a more

Hi, I have the Eaton 5E850iUSBDIN UPS connected via USB to a Raspberry Pi 3B+. It seems that everything but the ondelay parameter works so far. when I test the setup with this command: upsmon -c fsd The NUT server makes the NUT clients shut down properly and the Raspberry Pi running the NUT server shuts down correctly too. The problem is that after UPS shuts down, it immediatelly brings the

Hi. I'm using ubuntu 10.04 and I'm in the process of buying a ups. This is it (eaton 5115 ups) with usb interface http://powerquality.eaton.com/05146561-5591.aspx?CX=3 I had a look at the ups compatibility chart here: http://www.networkupstools.org/stable-hcl.html But I can't find this particular ups listed. I plan to use NUT v. 2.4.3 that I can get from the

Device Manufacturer: Eaton Device Name: 5S1500LCD ---------------------------------------------------------- upsc output: battery.charge: 100 battery.charge.low: 20 battery.runtime: 3515 battery.type: PbAc device.mfr: EATON device.model: Ellipse PRO 1500 device.serial: 0000000000 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Device Manufacturer: Eaton Device Name: 5S1500LCD ---------------------------------------------------------- upsc output: battery.charge: 100 battery.charge.low: 20 battery.runtime: 3515 battery.type: PbAc device.mfr: EATON device.model: Ellipse PRO 1500 device.serial: 0000000000 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Well, from your logs it seems that at 05:17:03 your nut-server (upsd) restarted, so an upsmon reconnection attempt at 05:17:09 had an issue with that (config not all applied? strange a bit) but since 05:17:14 it is okay. Maybe a few too many banners shown from upsmon, while its same uptime seems to continue. Maybe someone should check on that, seems like a good and easy newcomer issue to learn

I've used NUT successfully for monitoring many different brands of UPS, but this one has me stumped. It has the same manufacturer ID and Product ID as older supported MGE-type Eaton UPS's, but has trouble talking. I tried Ubuntu's repo NUT, and it logs a Connecting to UPS message every few seconds forever, but never really succeeds (or says it fails). Different failure mode after

Nut for Windows 2.6.3-3 + Eaton/PW 5110 (103004256-5591). I had to manually install libusb driver and I'm using bcmxcp_usb. upsd.exe is reporting to me "Out of memory". It will run, but once anything connects to the daemon, it dies with that message. I don't have much experience with NUT yet so I'm not sure what the next course of action is. I do have NUT for Windows

Windows 7 Pro x64 Eaton 3S550 (brand new, battery mfg 8/15/2012) NUT 2.6.5-3 ups.status: OL CHRG CHRG was present even though it has been plugged in a few days turned on and battery.charge was 100%. Log includes me running upsc and removing power long enough to see that battery.charge will decrease. This UPS doesn't have controlled outlets despite what the upsc output says. ---

On 19.01.24 09:00, Jim Klimov via Nut-upsuser wrote: >Well, from your logs it seems that at 05:17:03 your nut-server (upsd) >restarted, so an upsmon reconnection attempt at 05:17:09 had an issue with >that (config not all applied? strange a bit) but since 05:17:14 it is okay. > >Maybe a few too many banners shown from upsmon, while its same uptime seems >to continue. Maybe

Hello, we try to use Network UPS tools to monitor a network connected Eaton 93PS UPS. It basically works but we get frequent "Data is stale - check driver" warnings with a "data is no longer stale" shortly after in the log. We tried both snmp-ups and netxml-ups driver and both raise the same error. If have captured the communication between nut and UPS but all

I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on usb i get frequent communication errors and data aquisition stopped. Mine has a serial connection, also. Operating via serial has no trouble. Maybe it's something related to usb setting in bios, i.e. Legacy mode, speed setting, etc. However on serial mode looks like the eaton or hoe power protector software does not