similar to: Any update on Belkin F6H350 UNV support?

Hi, I've been fighting with trying to get a Belkin Universal model F6C800-UNV to work with NUT. The error I am getting is as follows: ---------------------------------------------- * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Belkin 'Universal UPS' driver 0.06 (2.0.0) tcgetattr(/dev/ups): Inappropriate ioctl for device Driver failed

I've got a three Centos 5.5 KVM severs, but only one of them is presenting guests with the kvm-clock source. The two servers I'm not seeing kvm-clock on have Athlon x2 64bit processors. The other server with kvm-clock has a Phenom II X6 1090T Processor. I've checked the system configuration and all the boxes have the same set of RPM packages. To confirm that the issue was

Dear Ashley, I have no personal experience with the Tower-Rack series, but someone reported on the Nut-upsuser mailing list on 29 Nov 2005 that these models work with the "belkin" driver of the NUT software (http://www.networkupstools.org/). This is for the serial port. For USB, the NUT "newhidups" driver should work (or if it does not, we can fix it). The software that

Hi, I'm running the following command as a local copy command. faheem at bulldog:/mnt/data$ sudo rsync -abvz --super /data/ . Origin directory faheem at bulldog:/data$ ls -la total 28 drwxr-xr-x 7 root root 4096 Jun 26 08:34 . drwxr-xr-x 25 root root 4096 Apr 13 17:09 .. drwxr-xr-x 2 owzar001 root 4096 Nov 6 2010 CTS drwxr-xr-x 2 owzar001 owzar001 4096 Aug 27 2010

I recently installed NUT 2.2.1 and set it up with a Belkin F6C100-UNV. I can monitor it via serial (belkinunv) or USB (usbhid-ups) cable, and both do seem to work fine, but I would prefer USB to avoid having to add a PCI serial card to the machine. I had to unplug something else to try it with a serial cable. Using 'belkinunv', there's a "-x wait" option: [ from

I have a new Belkin F6C900-UNV. I see that it's not listed in belkin-hid.c The VendorID is 0x050d like all the Belkin UPSes, and the ProductID is 0x0900. I haven't had a chance to actually test the development version of nut yet, since I'm running Fedora Core 6, which still has nut 2.0.3. `newhidups -DD -a myups` gives the error of: Checking device (050D/0900) (001/002) - VendorID:

I just moved my UPS over from serial to USB and found that I needed to add it to the hotplug USB list to make things work. Belkin F6C120-UNV - Bus 002 Device 004: ID 050d:0912 Belkin Components It seems to be working OK on 2.0.4 with newhidups. Attached is a patch which I think should add the appropriate device id's in the right places to the trunk code. Jon -------------- next part

All, I just bought a Belkin F6C1100-UNV and am trying to get it to work with NUT. I have tried many drivers ( "belkin", "belkinunv", "genericups upstype=4", and "genericups upstype=7", "bestups", "fentonups"). None of them seem to work. Does anyone have any experience with this device? If there is some utility that you all use to

Oh oops, I see you already did. -- Peter selinger wrote: > > You could send it without "submitting" it. That's the advantage of > patches - they can be discussed. There are lots of eyeballs here that > might see what's wrong. Thanks, -- Peter > > Eric S. Raymond wrote: > > > > Peter Selinger <selinger at mathstat.dal.ca>: > > > I

I've a Belkin Regulator Pro (F6C1400-EUR) connected via serial to a FreeBSD machine using NUT v.2.4.3 Sometimes I get a series of logged messages saying that the data is switching between stale and valid, this in itself isn't an issue, however occasionally when the communication is re-established, upsmon gets a "On battery" message followed quickly by "Battery low"

Hello, all, I had been using NUT's Ubuntu package (64 bit) with no problems until upgrading to Ubuntu 11.04. Now, I get the following message when I try usbhid-ups: $ sudo /lib/nut/usbhid-ups -a mybelkin Network UPS Tools - Generic HID driver 0.35 (2.6.0) USB communication driver 0.31 Can't claim USB device [050d:1100]: could not detach kernel driver from interface 0: Operation not

Greetings! Thanks to all the developers who have made this project so far. Searching for a Linux based Belkin UPS monitor led me straight to the Network UPS Tools. I have bought a Belkin F6C900-UNV (900VA) for use on a Slackware 10.2 server to replace an older APC model that died suddenly. So far I have successfully managed to get NUT 2.0.5 compiled and configured and found that this Belkin

Hi everyone, I have a belkin ups that was bought around 2 months ago. It seems like the driver doesn't like the UPS, although on the website it's listed as supported. This is on a gentoo system with nut 2.2.1 . megatec_usb output: ---------SNIP---------- digamma nut # ./megatec_usb -a belkinm -DDDDDD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

I recently upgraded from nut-2.4.1 to 2.4.3 and my UPS stopped working. usbhid-ups now fails two communicate with the UPS: With 2.4.1: # /sbin/usbhid-ups -D -a auto Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '1' upsdrv_initups... Using subdriver: Belkin HID 0.12 Path: UPS.BELKINConfig.BELKINConfigVoltage, Type: Feature, ReportID: 0x01,

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it

I've recently upgraded a Centos 5.3 machine to Centos 5.5. The hardware isn't HVM capabile so I'm only running para-virt guests. Using a vanilla i386 kernel boots without, but the newer kernel-xen locks up the Dom0 after a couple of minute. I'm only booting into single user mode for these tests so no VMs are active. *kernel-xen-2.6.18-128.1.10.el5 - no issues

Greetings list, I am about setting up a domain controller in a little company, so I choose samba (debian lenny) and I did it against openldap. Everything seems to be ok in the server but when I try to log in (windows client) I have a bizarre output: it said that my profile will not be saved. And after that when I try to connect to virtual machine running in the same computer, it doesn't work:

Hi, Trying to write a generic function to deal with either arrays or strings. Here''s a cutdown version of what I''m writing highlighting the problem I have. All i''m trying to do is take ''server1.testing.com'' from the variable $server (the variable being either a string or an array) and assign it to $bar, or assign