similar to: UPS repeater configuration using localhost

On Sep 12, 2013, at 7:47 PM, Derek Rachul <drachul at gmail.com> wrote: > I tried reversing the order of the definitions in the config file, and it does seem to change the order in which they're loaded (at least according to the system logs) however the error remains. I don't have any experience using the dummy-ups driver on the same host as the real UPS driver, so this is a

[please keep the list CC'd. Thanks!] On Sep 16, 2013, at 8:11 PM, Derek Rachul <drachul at gmail.com> wrote: > On Mon, Sep 16, 2013 at 4:36 PM, Charles Lepple <clepple at gmail.com> wrote: >> On Sep 12, 2013, at 7:47 PM, Derek Rachul <drachul at gmail.com> wrote: >> >> > I tried reversing the order of the definitions in the config file, and it does

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC

Good day. Can not perform shutdowns Ups. Please help. Details of our installation are: OS: Turris Omnia (TO) NUT version: 2.7.4-5 Installation method: from package UPS device: EATON UPS 5SC 500i , 230V, 350W, 500VA, USB bought in jun 2018 If you connect to TO UPS via USB, the /dev/hidraw0 device will be created. No any programs from NUT package is not running. When I run: /lib/nut/usbhid-ups

Hi! Some systems I have take some time to shut down, so I would like them to shut down if the UPS have been on battery for 2 minutes. Internet has told me that SHUTDOWNCMD ?/sbin/shutdown -h +0? in /etc/nut/upsmon.conf will execute when the UPS is both OB (on battery) and LB (Low battery). Like in wiki.ipfire.org - Detailed NUT Configuration<https://wiki.ipfire.org/addons/nut/detailed>

Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182 <http://forum.qnap.com/viewtopic.php?f=182&t=35970&start=0> &t=35970&start=0 but I'm not there yet. When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS

I used strace and the result is bus is busy: clock_gettime(CLOCK_MONOTONIC, {8158, 708518222}) = 0 timerfd_settime(11, TFD_TIMER_ABSTIME, {it_interval={0, 0}, it_value={8159, 708518000}}, NULL) = 0 ioctl(12, USBDEVFS_SUBMITURB, 0x40810) = 0 poll([{fd=7, events=POLLIN}, {fd=9, events=POLLIN}, {fd=11, events=POLLIN}, {fd=12, events=POLLOUT}], 4, 60000) = 1 ([{fd=12, revents=POLLOUT}]) ioctl(12,

Hi, Another beginner question. I spend hours trying to find the solution for how to configure winnut properly but I' struggling to make it work. I want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during power outage. I configured QNAP properly (like this: http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what to do next. I work

I've searched for quite some time and read the FAQ, but to no avail. I have a UPS connected to a NAS. Unfortunately I have to specify every single client IP (ups slave), because the stupid NAS system (QNAP) does not allow me to set a /16 or /24. Changing the config files manually does not work either, because the service won't come up anymore. (One has to love QNAP at this point.) Thus I

On Jan 1, 2015, at 8:23 PM, Charles Lepple <clepple at gmail.com> wrote: > On Jan 1, 2015, at 4:57 PM, Jonathan Gammell <jon.gammell at utoronto.ca> wrote: > >> [ups] >> driver = dummy-ups >> port = eaton1 >> desc = "Dummy UPS" > > There is a typo in the specification of "port =" in the dummy-ups man page,

On Jan 2, 2015, at 8:15 PM, Jonathan Gammell <jon.gammell at utoronto.ca> wrote: > > Thanks Charles, > > You're right that it should be "eaton1 at localhost". That was actually just a one-off mistake in making a simple example to post. The errors are the same even with the correct "@localhost". I will look into whether there's a backport to 12.04, as

On 15-01-01 08:57 PM, Charles Lepple wrote: > On Jan 1, 2015, at 8:23 PM, Charles Lepple <clepple at gmail.com> wrote: > >> On Jan 1, 2015, at 4:57 PM, Jonathan Gammell <jon.gammell at utoronto.ca> wrote: >> >>> [ups] >>> driver = dummy-ups >>> port = eaton1 >>> desc = "Dummy UPS" >> >>

Hi all. UPS is Eaton 5SC 500i. I tested three solutions: 1. swap "usbhid-ups -a qnapups" with "usbhid-ups -a qnapups -k" Result: server shutdown, but ups does not shut off! 2. run prog with params "upsmon -c fsd" Result: server shutdown, but ups does not shut off! 3. run prog "upscmd -u name -p passwd qnapups shutdown.return" and next

On Jan 1, 2015, at 4:57 PM, Jonathan Gammell <jon.gammell at utoronto.ca> wrote: > [ups] > driver = dummy-ups > port = eaton1 > desc = "Dummy UPS" There is a typo in the specification of "port =" in the dummy-ups man page, but your configuration file is effectively looking for a simulation file named 'eaton1'. The presence of

Hi Greg, Thomas and the list, I've not forgotten you nor your issue. It just took some time to gather a "faulty" unit and a bit of time to reproduce your issue. The good news is that I've commited a fix to the NUT development branch (aka Subversion), in the release r2015. The bad news is that your test and feedback is welcome ;-) For more info on getting and compiling the

I have a new APC Smart-UPS SUA2200RM2U. I've had no success with the manufacturer's PowerChute software and smart signaling, so I have decided to try NUT. The smartups driver can't make contact through the serial port. Since this is rack-mounted, it comes with a 940-1524 serial cable. As far as I can tell, this is supposed to work with smart signaling. Here's my ups.conf:

Hi, I have a NUT client that requires the UPS it monitors to be named "ups". The client (a Synology NAS) does not provide a method to change this configuration. My setup consists of multiple UPSes monitored by a single master and I'd rather not have 1/4 UPSes named `ups` while the other 3/4 are named something descriptive and helpful for administration. I think I should be able

On 01/07/2018 11.53, icingaj at gmail.com wrote: > Good day. > > Can not perform shutdowns Ups. Please help. > > Details of our installation are: > OS: Turris Omnia (TO) > NUT version: 2.7.4-5 > Installation method: from package > UPS device: EATON UPS 5SC 500i , 230V, 350W, 500VA, USB bought in jun 2018 > > If you connect to TO UPS via USB, the /dev/hidraw0

Hi all, I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. Since on all my work I figure out the following: from Network UPS Tools upscmd 2.4.1 [~] # upscmd -l qnapups Instant commands supported on UPS [qnapups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use

Good morning everyone, we're currently in the process of redesigning our UPS signalling scheme, and decided to have a closer look at NUT. This is our setup: - a (really) big UPS (Piller, with a web/SNMP interface) - several computer rooms with equipment of different importance, managed by several people not sharing ssh keys etc., with an unknown number of machines - IPMI signalling to