similar to: Liebert GXT3 ID 10af:0000 Not working

On Aug 19, 2013, at 12:58 PM, Korviakov Andrey wrote: > I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. > lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS > > And this UPS detected only with this section in ups.conf: > > [liebert] > driver = liebert > port = /dev/ttyS0 I am confused.

[please keep the list CC'd.] On Aug 20, 2013, at 12:50 AM, Korviakov Andrey wrote: > Yes, it's my mistake: UPS used USB cable for communication, but i think that it's simple usb-com cable because nut work with liebert driver on ttyS0 port. If that is the case, I doubt that usbhid-ups will be able to retrieve any additional information. > In ups.conf i tried: > >

Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength

On Oct 29, 2014, at 5:08 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > Hi, > > I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm > using Ubuntu 14.04, but I'm having troubles (similar to this thread > [1]) using the standard "nut" package from the Ubuntu repositories. > > After some more searching,

Hi, I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm using Ubuntu 14.04, but I'm having troubles (similar to this thread [1]) using the standard "nut" package from the Ubuntu repositories. After some more searching, I've found this very recent thread in this list ("Return on experience with an Emerson/Liebert GXT3" [2]), and from my

2014-11-09 9:59 GMT-03:00 Charles Lepple <clepple at gmail.com>: > On Nov 9, 2014, at 6:58 AM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > >> I'm attaching a new debug log with this modification, just in case, >> but I'm still seeing the lines you've pointed at: >> >> 0.062308 Path: UPS.PowerSummary.Voltage, Type:

2014-11-07 0:16 GMT-03:00 Charles Lepple <clepple at gmail.com>: > On Nov 6, 2014, at 5:56 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > >> battery.voltage: 10000000. >> battery.voltage.nominal: 0.0 > > Well, these are certainly interesting values ;-) > > I suspect the correction for earlier units has failed. Can you please start

Hello, we have a Emerson Liebert GXT4, that we like to connect to our servers to shut them down if there is a power failure (which happens quite often in our area). I couldn't get the GXT4 working with usbhid-ups driver. So I need some advise to continue to get this device working. The GXT3 seems to be working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html). Here is my

On Nov 9, 2014, at 8:13 AM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > 2014-11-09 9:59 GMT-03:00 Charles Lepple <clepple at gmail.com>: >> >> Strange, I would have thought that the "Value: 0" would show the actual number. Does it look like drivers/libhid.o got rebuilt? > > Yes, at first I thought the same (that I did something

On Nov 7, 2014, at 7:30 AM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > 2014-11-07 0:16 GMT-03:00 Charles Lepple <clepple at gmail.com>: >> On Nov 6, 2014, at 5:56 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: >> >>> battery.voltage: 10000000. >>> battery.voltage.nominal: 0.0 >> >> Well,

Hi. I would like to share with you my experience on trying to use nut with a Liebert GXT3 on a Debian wheezy with nut-server 2.6.4. Please find my observations below. (1) I've installed the packaged version of nut-server # aptitude install nut-server (2) I did some tuning for my configuration #??cat << EOF >> /etc/nut/ups.conf user=nut [liebert] ??????? driver=usbhid-ups

2014-11-08 20:46 GMT-03:00 Charles Lepple <clepple at gmail.com>: > On Nov 7, 2014, at 7:30 AM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > >> 2014-11-07 0:16 GMT-03:00 Charles Lepple <clepple at gmail.com>: >>> On Nov 6, 2014, at 5:56 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: >>> >>>>

2014-10-30 0:49 GMT-03:00 Charles Lepple <clepple at gmail.com>: > On Oct 29, 2014, at 5:08 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > >> Hi, >> >> I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm >> using Ubuntu 14.04, but I'm having troubles (similar to this thread >> [1]) using the

Hi On 10/02/2014 02:39 PM, Charles Lepple wrote:> On Oct 1, 2014, at 9:03 PM, paul.chavent at fnac.net wrote: > >>> It should run as user "nut" in Debian. You may want to reinstall the nut-server package, and check the post-inst error messages to make sure that the "nut" user is created, and that it is in the "nut" group as well. >> >> The

Hi On 10/03/2014 03:42 PM, Charles Lepple wrote:> On Oct 3, 2014, at 7:50 AM, paul.chavent at fnac.net wrote: > > > This is what I was referring to (from the belkin-hid log): > >???? 1.325782??? Report[buf]: (5 bytes) => 05 53 00 48 00 >???? 1.325799??? Path: UPS.PowerSummary.ConfigVoltage, Type: Feature, ReportID: 0x05, Offset: 16, Size: 16, Value: 0 >????

> https://github.com/networkupstools/nut/issues/138 > That issue also includes an override setting, so if I can't get any other testers, I plan to merge it as-is. Ok, great. > It should run as user "nut" in Debian. You may want to reinstall the nut-server package, and check the post-inst error messages to make sure that the "nut" user is created, and that it is

Hi UPS List members, I have purchased a number of Emerson Power / Liebert GXT4 UPS units. I have these working correctly under nut, but limited detsils are being reported. I am happy to supply information on the USB communications to improve the reported details I can use WireShark to capture the comms between the supplied Windows GUI tool and the UPS Please advise the best way I can

Hi On 10/06/2014 03:04 PM, Charles Lepple wrote:> I think I see what is going on. > >???? 0.368670??? Report[buf]: (5 bytes) => 05 4e 00 48 00 >???? 0.368698??? PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0 >???? 0.368723??? Unit = 00000000, UnitExp = 0 >???? 0.368747??? Exponent = 0 >???? 0.368776??? Path: UPS.PowerSummary.Voltage, Type: Feature, ReportID: 0x05, Offset:

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups

Hello, I (now) own an Emerson Liebert GXT3 6000VA conected via USB. I've searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive