similar to: Fwd: Liebert PSA UPS problem.

Anyone have any advice what I need to do next? Regards, Paul. -----Original Message----- From: Nut-upsuser [mailto:nut-upsuser-bounces+paul=smithp.co.uk at lists.alioth.debian.org] On Behalf Of Charles Lepple Sent: 02 August 2013 11:36 To: nut-upsuser list Subject: [Nut-upsuser] Fwd: Liebert PSA UPS problem. Begin forwarded message: > From: "Paul Smith" > Subject: Liebert PSA

Hi, Back in 2011, it was reported that Liebert PSA devices persist in reporting OB (On Battery) when using usbhid-ups regardless of the actual state. Pier Paolo did some work (2011) which reportedly solved the issue. However, that doesn't seem to have reached mainstream and I now face the same problem. I'm using NUT 2.6.3 with a new Liebert PSA 1500Va that only ever reports OB and

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups

On Oct 17, 2014, at 8:31 PM, Tim Dawson <tadawson at tpcsvc.com> wrote: > Likely because 2.6.3 is not a current release. 2.7.2 (or 3?) is rhe current version, and it makes little sense to backport changes. Tim, It's possible that these changes didn't make it in. I admit that would be my knee-jerk reaction to seeing an older version number, but the last occurrence of

Likely because 2.6.3 is not a current release. 2.7.2 (or 3?) is rhe current version, and it makes little sense to backport changes. Nut is a trivial compile . . . 'Use the source, Luke . . .' - Tim On October 17, 2014 6:05:35 PM CDT, Derek Harding <derek at lagham.org.uk> wrote: >Hi, > >Back in 2011, it was reported that Liebert PSA devices persist in >reporting OB

I guess it's kind of a natural response on my part, working professionally in software. T-Shooting step one: Get current and see if the problem persists. If it does,then step rwo: debug. 2+ years is forever in software, noting that 2.6.3 was mid 2012 . . . - Tim On October 17, 2014 9:38:15 PM CDT, Charles Lepple <clepple at gmail.com> wrote: >On Oct 17, 2014, at 8:31 PM, Tim Dawson

On Aug 11, 2013, at 12:04 PM, Paul Smith wrote: > Anyone have any advice what I need to do next? A while back, you sent me the pcap file from the Windows side, but there was an open question as to whether the USB requests were standard Windows HID driver requests, or whether the Liebert software was still running in the background. Also, the SuSE Live CD seems to be the only non-Windows

Hi all, Sorry for the delay - three business trips abroad and LOTS of head scratching with USB Keys and DVD's of SuSE and FreeBSD... The question about the USB reports from Windows is still unanswered (I am abroad again !), but *think* the Liebert driver had been stopped. I can report the following updates for my linux setups; SuSE/FreeBSD/FreeNAS [remember here I am trying to make nut

I downloaded latest source and it compiles ok but the original usbhid-ups.c is unchanged. Pier changed other files, too, and I don't know the changes needed. Simply substituting the modified (as per 2011) usbhid-ups gives a failed connection to the ups. So I have tried a little. I'll uninstall 2.6.3 and try to install 2.7.2 from a fresh compile. Thanks for the responses so far :-) --

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE

Hi all, This is my first experience with NUT. I'm trying to test a Liebert PSA 1500 UPS, connected via USB to a single PC. I have followed the instruction in the "Configuration" section of the online user manual. Everything seems to be fine, except that, when I run "upsc liebert at localhostups.status", it retuns "OB", even if the UPS is currently online. Here

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

Hello The page https://networkupstools.org/ddl/Liebert/PSA_1500.html don't contain all information about UPS series PSA. First, the variable "*device.serial*" is dummy, it is always empty , and "*ups.serial*" also always empty. Second, configuration file for the all UPS "PSA" contain these lines: [PSA] ??? driver = "usbhid-ups" ?? ?port =

This is the last post in the old thread: http://lists.alioth.debian.org/pipermail/nut-upsuser/2011-February/006651.html I'm marginally reluctant to install a non-standard release on a customer server because I may not be the next person to have to work on it, however, I do agree the most recent is usually the first port-of-call. Since it seems the fix didn't get followed through,

Jochen Bern wrote: > > Peter Selinger wrote: > > have you been able to get your Liebert UPS to work? If I am correct, > > it should work with the newhidups Belkin subdriver. Could you please > > post your results? I am curious to know if this works or doesn't - and > > if yes, we should add permanent support for Liebert into NUT. > > I'm sorry, but

Kris Jordan <nut.kj <at> sagebrushnetworks.com> writes: > > Marcelo Roccasalva wrote, On 3/1/2013 12:10 PM: > > On Thu, Feb 28, 2013 at 6:17 PM, Marcelo Roccasalva <roccas <at> gmail.com> wrote: > >> On Tue, Feb 26, 2013 at 10:56 PM, Charles Lepple <clepple <at> gmail.com> wrote: > >>> On Feb 21, 2013, at 6:21 PM, Marcelo

Hello, I need help configuring my USB connected UPS "Emerson Power Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. here's the manufacturer's product page http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx I'm not a BSD expert, so please ask me for any information you need. regards Daniele

Hi all, This is just a PSA that as of r302752, 3 parallel algorithms (for_each, for_each_n, and sort) are available in llvm/Support/Parallel.h. Effort was made to match the C++ Parallelism TS N4507 [ http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4507.pdf] as closely as possible, but some aspects were intentionally omitted. No support is added for the executor proposal N4406 [

Nice! it seems to works. Later this evening when I'll be back to my home I'll try to unplug the power chord from my ups. Apr 3 14:08:11 archivio notifier: nut not running? (check > /var/db/nut/upsd.pid). > Apr 3 14:08:11 archivio notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Apr 3 14:08:11 archivio notifier: nut_upslog not running? (check >

please reply to the list. thanks! See below. On Apr 3, 2014, at 3:10 AM, Daniele Borghesi wrote: > thanks for your reply. I'm running the latest version of FreeNAS based on 9.2 with NUT 2.7.1 > > [root at archivio ~]# uname -a > FreeBSD archivio.dannyb78.home 9.2-RELEASE-p3 FreeBSD 9.2-RELEASE-p3 #0 r262572+ > 38751c8: Thu