similar to: Get Nut to Shutdown Computer After a Few Minutes on Battery

I've recently moved from installing NUT from source to installing NUT from the FreeBSD package (FreeBSD 9.1). One would think that I might have learned not to change anything, but I made the change. And here is my tale of woe..... My first question is: is it possible to simulate a "UPS is on battery" state? Some background: UPS comm port is connected to and monitored by

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

A couple of different issues with the reporting script. First the password masking is not working as intended: I have three different passwords in my ups.users file and only the last one is masked. Here's the first part of the resulting report where I've replaced the unmasked passwords with <PASSWORD-n>. NUT configuration 2019-07-14 16:58:15 UTC ###########

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Greetings! I have successfully installed and configured nut package. All i want now is to power off ups. If i run upsmon -c fsd as root - everything goes fine, system and ups gracefully shutting down. If i unplug power cable from an ups, then system is down, but ups still on load. Any help would be appreciated. Debian Lenny x86 ups.conf [ippon] driver = megatec port = /dev/ttyS0

> What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines when to shut down. > > Also, if you don't want to wait for both UPSes to drain to the low battery state, you can set up a pair of dummy-ups drivers. I'm

> Since it's NUT in the NAS which is deciding to order the shutdown, it would be > useful to see upsmon.conf, upssched.conf and upssched-cmd (or whatever Synology > use if anything) from the NAS to see what criteria they use. upsmon.conf (on Synology): RUN_AS_USER root MONITOR ups at localhost 1 monuser secret master MINSUPPLIES 1 SHUTDOWNCMD "" NOTIFYCMD /usr/sbin/upssched

Hi, I’ve posted my question on Superuser.com but not had any replies in 2 weeks, so I guess no-one there knows anything about NUT. https://superuser.com/questions/1441153/how-to-shutdown-macos-mac-osx-from-network-ups-tools-client-nut <https://superuser.com/questions/1441153/how-to-shutdown-macos-mac-osx-from-network-ups-tools-client-nut> I’m looking for help in shutting down my iMac on

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS

The problem with computers - they do what you tell them to, not what you might want them to. Here your heartbeat.dev literally tells the emulation driver to set ups.status=OL, wait 300s, set it to OB, wait 300s, repeat. So NUT reporting that the heartbeat UPS became on-battery 5 minutes after start means these pieces are doing their job correctly and talking to each other well. Jim On Sat, Mar

I'm using nut-2.8.2 on FreeBSD 14.2 with an Eaton 5PX2200RT Five minutes after starting nut, I get this message within my ssh session: UPS heartbeat on battery It is not clear to me why it reports that. Here is the full output of a restart: [18:12 gw01 dvl ~] % sudo service nut restart Stopping nut. Waiting for PIDS: 2553. Network UPS

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC

On 9/16/08 3:35 PM, "Arjen de Korte" <nut+users at de-korte.org> wrote: > Citeren tarbeite <tarbeite at fit.edu>: > >> Running opensuse 11 with two ups that can be seen via web interface and post >> messages on the console. > > Please post the contents of /etc/ups/upssched.conf here. Also make > sure that the directory mentioned in PIPEFN and

ok, this function really worked? i have a linux Fedora 20 system, i install from rpm in version 2.6.2 and i this function not execute. Then i delete the rpm packet and all configuration files and compile latest stable 2.7.2 version with usb driver. ok, i first load ups driver: * /usr/local/ups/sbin/upsdrvctl -u root start* next i started */usr/local/ups/sbin/upsd* and next*

Hi, I'm attempting to use the UPS network tools. I'm sure I got the configurations worked out as I get notified when the ups goes on battery and back online. I am having problems with upssched. I have the following in my upssched.conf: CMDSCRIPT /usr/local/ups/sbin/upssched-cmd AT ONBATT * EXECUTE onbatt The problem I have is that is seems like the script in CMDSCRIPT never gets

Hello List, Any suggestions to solve the following would be most appreciated. Setup: Active/Passive Two Node Cluster. Two UPSes (APC Smart-UPS 1500 C) with USB communication cables cross connected (ie UPS-webserver1 monitored by webserver2, and vice versa) to allow for stonith/fencing OS OpenSuse Leap 42.2 NUT version 2.7.1-2.41-x86_64 Fencing agent: external/nut Problem: When power fails to a

Hi, The exec is returning 126 - "Command invoked cannot execute. A permission or command not executable problem.". Are you sure that the script is executable by the user running NUT? Do you have SELinux enabled? Regards, Neil. On 27/04/15 20:55, James Hammond wrote: > Hi Roger, > > I get: > > Apr 27 20:50:05 unifi upsmon[1022]: UPS ups on battery > Apr 27

Hi, I want to test the events off my UPS. I define In upsmon.conf: RUN_AS_USER root NOTIFYCMD /sbin/upssched NOTIFYMSG ONLINE "UPS %s on line power" NOTIFYMSG ONBATT "UPS %s on battery" NOTIFYMSG LOWBATT "UPS %s battery is low" # NOTIFYMSG FSD "UPS %s: forced shutdown in progress" NOTIFYMSG COMMOK "Communications with UPS %s established"

Hi Jim ii ?nut ??????????????????????????????????2.7.4-13 ??????????????????????????all ?????????network UPS tools - metapackage ii ?nut-client ???????????????????????????2.7.4-13 ??????????????????????????amd64 ???????network UPS tools - clients ii ?nut-server ???????????????????????????2.7.4-13 ??????????????????????????amd64 ???????network UPS tools - core system debian 11 I'am