similar to: Hope for APC Smart UPS 1500

Displaying 20 results from an estimated 2000 matches similar to: "Hope for APC Smart UPS 1500"

2013 Jul 09
0
Hope for APC Smart UPS 1500
Hi, we bought two Smart-UPS X 1500 FW:UPS 09.1 / ID=20 lsusb -v: Bus 002 Device 002: ID 051d:0003 American Power Conversion UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor
2013 Jul 10
0
Hope for APC Smart UPS 1500
On Jul 9, 2013, at 9:04 AM, Gregor Burck wrote: > we bought two Smart-UPS X 1500 FW:UPS 09.1 / ID=20 [...] > I see there should be problems to get it work with a free daemon like nut, but are there some hints using it? > In my ups.conf I tried: > > [apc001] > driver = apcsmart > port = auto > desc = "Smart APC" Only the USB drivers should
2010 Apr 29
1
APC Smart-UPS Pro 1500 USB monitoring trouble
Hi there... nut 2.4.3 kicks an error at me when I try to talk to my UPS. machine is linux 2.4.21-32.ELsmp with libusb-0.1.8-3 package update. # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using subdriver: APC HID 0.95 libusb_get_interrupt: error submitting URB: Invalid
2013 Jun 23
1
Bluetooth 4.0 with chip BCM20702A0 on CentOS6.4
Hi All, I bought a USB Bluetooth dongle. However, it's not working for me. Please help, how to debug and get more information as I can not see any error or warning message from system log message. I checked http://thread.gmane.org/gmane.linux.bluez.kernel/22183/focus=22211, however, also find another page
2013 Jan 13
0
Evolution 850 not recognized by NUT 2.6.5?
Hello list, ? ?Cannot make Evolution 850 to be recognized, maybe the problem is "Warning: incomplete endpoint descriptor" in lsusb? Details are as follows. NUT installed by download of debian package. Any ideas/suggestions are highly welcome, thanks in advance! --ValenteM = ? ?= ? ? = ? ? = Ubuntu server 12.04.1 LTS (GNU/Linux 3.2.0-35-generic x86_64) sudo dpkg -i
2008 Dec 01
1
Unitek Self Protek Mistral 1000ipF
Hi, just try the Unitek Self Protek Mistral 1000ipF with nut and I doesn't work. How can I correctly configure it (if the driver support it). Best regards, In my dmesg: [42953293.620000] usb 1-2: new low speed USB device using uhci_hcd and address 7 [42953293.760000] usb 1-2: no configurations [42953293.760000] usb 1-2: can't read configurations, error -22 [42953293.880000] usb 1-2: new
2007 May 05
1
powermust usb
Hi, I have a powermust with a usb connector. I searched the archive and found this post: http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-April/000816.html Must I abandon hope of controlling this UPS via USB with NUT? Added this line to /etc/udev/rules.d/70-nut-usbups.rules: # OMRON - usbhid-ups SYSFS{idVendor}=="06da", SYSFS{idProduct}=="0003",
2016 Jul 26
0
Two UPS with same vendor ID
Hello I have two completely different UPS that turn out to use the same driver. Both work with blazer_usb my LSUSB says: Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial my lsusb -vd 0665: says: pi at elektra:~ $ lsusb -vd 0665: Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
2017 Jan 04
0
Guardian LCD 1500 AP ( IGA1500LCD )
Hello In case anyone is interested and for the sake of updating the documentation from http://networkupstools.org/stable-hcl.html , I would like to report that nut v2.7.4 talks successfully ( at least partially ) with the UPS from $topic, which is part of the product line from http://www.informups.com/guardian_guardian_lcd600va_2000va.html ( Inform is a Turkish manufacturer that was
2005 Jan 03
1
USB booting
folks, the following is lsusb -v for my 250gb usb hard drive. I note the Protocol line mentions zip: ie bInterfaceProtocol 80 Bulk (Zip) does that mean its one of those USB-ZIP devices ? If so, to the parameters below say anything about the CHS settings needed ? tia, PS - HPA, you were correct wrt what I missed :-} Bus 001 Device 002: ID 1058:0401 Western Digital Technologies,
2010 Sep 16
1
Soyntec Sekury A600 VA
Hi all! FYI, after some research in your list I think that blazer_usb is the best driver for my Soyntec Sekury A600 UPS (which is not in the hardware supported lists). I connected it with my system using USB port (it also has serial RS-232) This is the report I have: battery.voltage: 13.60 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_usb
2008 Jan 07
1
INFOSEC 500 XP usb support
Hi everybody, In a christmas sequel I've been offered one of the units mentioned above. I've tried to connect it to my Fedora 8 workstation but rapidly concluded it's not yet supported by NUT. So far, I've decompiled the Java classes of the manufacturer's application and noticed that it's most probably yet another kind of serial protocol through the USB. Since
2013 Feb 19
1
UPS Liebert GXT-3
Hello, I (now) own an Emerson Liebert GXT3 6000VA conected via USB. I've searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive
2007 Oct 31
0
NUT usbhid -- trying to write USB (sub)drivers
Hi Rok, I retired from working on NUT a few months ago, so I don't have the most up-to-date info. But the guys on the nut-upsdev mailing list (cc'd above) are very helpful. Both of your devices (or nearly identical ones) have been seen on the mailing lists before. The Sweex was first mentioned in a message by Eli Wapniarski on 14 Jun 2006 on nut-upsuser, and was most recently discussed
2015 Sep 10
0
UPS/NUT with openSUSE 13.1
rtd at linux-5048:~> lsusb -vvv -d 2a37: Bus 001 Device 005: ID 2a37:5110 Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor
2014 Sep 29
0
Tripp-Lite USB constantlly disconnecting.
Some of my messages never went through since I hit a message size limit. I'm resending them in the hopes they are under the limit. Charles, The lsusb command did not trigger a disconnect. The output of that command is below. I ran "usbhid-ups -a upsunit -DDD &> output.log" and I have attached the /var/log/messages and output.log to this email. Before running this test
2014 Apr 05
1
USB 3.0 NIC / Sitecom NL-031
Hi, I have a Sitecom NL-031 USB 3.0 NIC which I'd like to use under centos 6.5, but unfortunately I see no support. Or, I am doing something wrong. According to LKDDb (Linux Kernel Driver DataBase), the correct driver is "CONFIG_USB_NET_AX8817X: ASIX AX88xxx Based USB 2.0 Ethernet Adapters" but obviously, I've grabbed a non matching "iProduct", because mine is
2014 Feb 19
0
nut driver for SMS (brazil) UPS
Hi Charles, I'll try the blazer_ser and the nutdrv_qx with version 2.7.1 later. Below, the result of 'lsusb -vvv' requested: Bus 004 Device 002: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM RS232 Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level)
2010 Jul 09
2
SMS PowerVision PV2200 BIFX
Hello, I have two SMS PowerVision PV2200 BIFX, that came with a serial port, I used a serial - usb conversor to conect it to my pc it recognized as: lsusb -s 001:005 -vvv Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at
2011 May 30
2
UPS Liebert GXT3 config
Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength