similar to: How to Simulate UPS on battery?

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Hi, I have problem with upssched on windows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave

Here is patch 2 of 2. Roger diff -rup -x '*.html' -x '*.8' -x '*.5' nut-2.7.4.orig/docs/man/upsd.txt nut-2.7.4.dev/docs/man/upsd.txt --- nut-2.7.4.orig/docs/man/upsd.txt 2015-12-29 09:42:34.000000000 +0100 +++ nut-2.7.4.dev/docs/man/upsd.txt 2016-07-07 10:08:51.939354892 +0200 @@ -119,6 +119,16 @@ administrative functions like SET and IN controlled in

those mails list are from last century but i give it a try ! created : https://github.com/networkupstools/nut/issues/563 Hello all, Trying to run an EATON 850pro via USB on a Debian Stretch Stable. I have letsencrypt certificate installed and working. When trying to manage the EATON device, i got: upsmon Can not initialize SSL context When 850pro is connected via USB, i can: lsusb Bus 009

Ok, I am running NUT in dummy mode. I have added a new ups in ups.conf [dummy] driver = dummy-ups port = upsc.dev desc = "dummy ups for testing purposes" upsc.dev has been generated by exporting the Elit configuration. I have added the monitor line in upsmon.conf and the "exec" flags (all the events) MONITOR dummy at artu 1 user pass master SHUTDOWNCMD

On Mon, 3 Jul 2017, Andrea de Lutti wrote: > MONITOR dummy at artu 1 user pass master > SHUTDOWNCMD "/sbin/shutdown -h +0" > NOTIFYCMD /usr/local/bin/upssched-script Hi, As far as I can see, what you are getting in syslog corresponds correctly to what you have specified. You have specified that upsmon is to call upssched-script _directly_. This means that the argument to

Hi everyone, Here I am with my second attempt to persuade upssched to do things; for some reasons it just won't! Or if it runs, it never runs the script. OK, the story first: 2.0.3 (conveniently comes as RPMs by default on FC6) running on FC6; APC Smart-UPS 750 via serial connection all working fine. Here are the main files: /etc/sysconfig/ups SERVER=yes MODEL=apcsmart DEVICE=/dev/ttyS0

Den 28-06-2013 04:17, Mike. skrev: > > My first question is: is it possible to simulate a "UPS is on battery" > state? Instead of the real ups, use the dummy-ups driver /Niels -- Niels Baggesen - @home - ?rhus - Denmark - nba at users.sourceforge.net The purpose of computing is insight, not numbers --- R W Hamming

Hi Roger 2017-03-21 19:34 GMT+01:00 Roger Price <roger at rogerprice.org>: > On Tue, 21 Mar 2017, Arnaud Quette wrote: > > Hi Roger, >> >> reviving this discussion, since we have a Github ticket for 2.7.5: >> https://github.com/networkupstools/nut/issues/293 >> > ... > >> I've made some additions to clarify things on the timer, and complete

Hello. Battery, battery, battery. I am only thinking at worn batteries. I recently had the same symptoms with an hp/eaton g3 1500va. One of the 3 batteries was reading a healthy 12.8v, but when put under load it would quickly drain. I would measure each battery and test them under load, like with a car headlight bulb switched on both fillaments. On Thu, 23 Apr 2020, 16:54 Marc Franquesa,

Hi everyone, new to the list but a long time nut user. I've tried a couple of times to set up a timer to avoid getting annoying messages when the system goes on battery for only a few seconds. in uppsched.conf I added this at the bottom: AT ONBATT * START-TIMER onbattwarn 60 AT ONLINE * CANCEL-TIMER onbattwarn What am I missing? it still doesn't wait before alerting me.

On Thu, 29 Oct 2015, George Anchev wrote: > Today I experienced something weird. As I was working, the system > started a shutdown and did shut down, then the UPS got powered off and > then back on - an expected behavior for a power fail situation. However > there was no power failure! ... > Oct 29 10:46:46 i7 upsmon[2239]: UPS myups at localhost battery is low > Oct 29

Hi all I?m not sure if this is the right place to post but I?m at wits end. So here we go. Running opensuse 11 with two ups that can be seen via web interface and post messages on the console. My issue lies in trying to get the upssched and upsmon to work correctly. Currently I have the exec flags denoted in the upsmon and ?NOTIFYCMD /usr/sbin/upssched? is specified as the NOTIFYCMD flag as

I'm running a single "nut-server" that monitors seven ups units. In upsmon.conf: MONITOR ups-1 0 <User> <Pw> master MONITOR ups-2 0 <User> <Pw> master MONITOR ups-3 0 <User> <Pw> master MONITOR ups-4 0 <User> <Pw> master MONITOR ups-5 1 <User> <Pw> master MONITOR ups-6 1 <User> <Pw> master MONITOR

On Tue, 21 Mar 2017, Arnaud Quette wrote: > Hi Roger, > > reviving this discussion, since we have a Github ticket for 2.7.5: > https://github.com/networkupstools/nut/issues/293 ... > I've made some additions to clarify things on the timer, and complete the script: > https://github.com/networkupstools/nut/compare/upssched-doc?expand=1 Hi Arnaud, Your change to the

Hi, I cant seem to get my upssched to get called by upsmon. Upsmon -c fsd just shuts down without the message I set or the one in upssched-cmd /etc/ups/upsmon.conf: MONITOR ups6 at localhost 1 <user> <pass> master MONITOR ups8 at localhost 1 <user> <pass> master SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /usr/sbin/upssched NOTIFYMSG

There's supposedly another way with a custom upsmon.conf: NOTIFYMSG type message upsmon comes with a set of stock messages for various events. You can change them if you like. NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "Someone pulled the plug on %s" Note that %s is replaced with the identifier of the UPS in question. The message must be one

Hi, I want to test the events off my UPS. I define In upsmon.conf: RUN_AS_USER root NOTIFYCMD /sbin/upssched NOTIFYMSG ONLINE "UPS %s on line power" NOTIFYMSG ONBATT "UPS %s on battery" NOTIFYMSG LOWBATT "UPS %s battery is low" # NOTIFYMSG FSD "UPS %s: forced shutdown in progress" NOTIFYMSG COMMOK "Communications with UPS %s established"

P.S.2 Today I experienced something weird. As I was working, the system started a shutdown and did shut down, then the UPS got powered off and then back on - an expected behavior for a power fail situation. However there was no power failure! I ran nut-journal to check what happened: Previous complete boot through shutdown Oct 29 10:09:33 i7 upsdrvctl[1966]: Using subdriver: MGE HID