similar to: dumb slave

On Thu, 8 Jun 2017, Robbie van der Walle wrote: > After the first test and the NAS is restarted I had to change the > setting battery.charge.low again to 80? Does the NAS DSM reset battery.charge.low to 10 or is it internal to the UPS? You will have to experiment by disconnecting the UPS control lead from the NAS and connecting it (if possible) to the Mac. After setting to 80 and a

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

On Fri, 9 Jun 2017, Robbie van der Walle wrote: > # NOTIFYMSG - change messages sent by upsmon when certain events occur > # > # You can change the default messages to something else if you like. > # > # NOTIFYMSG <notify type> "message" > # > # NOTIFYMSG ONLINE "UPS %s on line power" > # NOTIFYMSG ONBATT "UPS %s on battery" > #

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

On Thu, 8 Jun 2017, Robbie van der Walle wrote: > The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like > this on the Mac: > > ??upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at synology > > Per?http://networkupstools.org/docs/man/upsd.users.html?,

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

On Fri, 9 Jun 2017, Robbie van der Walle wrote: > ... and also still open is the notification on the Mac. If notify-send is available on the Mac, then perhaps this will work: In upsmon.conf on the Mac you need NOTIFYCMD /usr/sbin/upssched (or wherever this goes on a Mac) NOTIFYFLAG ONBATT SYSLOG+EXEC In upssched.conf you need CMDSCRIPT /usr/sbin/upssched-cmd (or wherever this

I saw in the 'myths' section that WINE will not run on an AMD cpu. Can someone confirm or deny? I would like to run WINE, but I do not seem to have the correct cpu to use it.

I have the latest version of the Windows port of NUT installed on my Windows?7?machine. The UPS is connected via serial cable to the Windows machine. I also have my Synology NAS (which uses NUT) connected over the local network as a slave to the Windows NUT master. The Synology slave is configured to immediately go into "safe mode" whenever an FSD or OB+LB indication is received from the

Hi, I am unable to get upssched working correctly as my UPS calls low battery too late and there is no way to change it. I am running Nut 2.7.3 on Ubuntu 14.04 I have made this script, called /sbin/upssched-cmd.sh #!/bin/sh case $1 in onbatt) /sbin/upsmon -c fsd;; *) echo "shutdown implemented";; esac I am trying to run the script manually to break down my issues. All that

I have pfsense set as the NUT master and my Synology NAS as a slave client. I tried recreating a shutdown sequence by issuing a /usr/local/sbin/upsmon -c fsd command in pfsense (so as to preserve battery lifetime while testing all these) but the weird thing is that my Syno doesn't seem to get a hold of the FSD event. My pfsense master and UPS shuts down properly though. As soon as I issue the

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hello dear all, I try to use NUT for windows (not WinNUT), and stuck with launching NOTIFYCMD. On any event marked as SYSLOG+WALL+EXEC syslog entry appears, popup window appears, but NOTIFYCMD script doesn't run. If I run upsmon.exe in cmd (i. e. not as a service) everything works fine. Here is my upsmon.conf: MONITOR central at 10.35.0.180 1 user password slave MINSUPPLIES 1 SHUTDOWNCMD

Dear list, Can't make upssched notify me on event occured. OS: Debian, 2.6.26-1-amd64 Nut: 2.4.3-1.1squeeze1 UPS: Ippon Smart Winner 3000 connected via COM On event ( plug out the cord from UPS ) upsmon detect's status change to OB and gives WALL and syslog notify, but no script starting. In syslog no errors and no upssched process occured, just upsmon. There're no PIPE and LOCK

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1

NUT 2.8.01 When I pull the USB cable from the UPS, I get two notifications of the nocomm-timer expired. The first notification is in the proper sequence, the second notification occurs after 'commok' occurs. Seems somehow that upssched-cmd is getting a second nocomm-timer expired delayed. Dan -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Mittwoch, 22. Juni 2016 17:50, Roger Price wrote: On Wed, 22 Jun 2016, Andr? H?nsel wrote: > > Now, what I see is that when the UPS feeding server-1 goes LB, > > server-1 is indeed shut down, but it seems that the UPS is never switched off. > > > > This is a problem because when power is restored after shutdown, but > > before the battery runs out (with no

Hi, Can we export the samba audit logs (Authentication & Authorisation Logs) to Windows Event Viewer? I am trying to export the authentication & authorisation logs to a Windows Server to be shown in Windows Event Viewer. I read the link - https://wiki.samba.org/index.php/Event_Logging. But couldn't follow much. Can someone throw more light on the procedure, if it is possible? --

Dear all: I connect 2 PCs to the UPS, one is master and the other is slave. When the battery becomes low, the master only shutdown itself and the UPS load ! It seems that the slave can¡¯t receive the FSD signal, and I didn't see the master send FSD to the slave. Perhaps something is wrong with my configuration. What shall I do? Any help is greatly appreciated ! Regards, Chris