similar to: Re: Variables Scale Bug OR Feature

Hello Linas, > Just wanted to inform You (for the compatibility list), that HP R/T2200 works perfectly with the hidups driver. Thank You very much for NUT! :) > > # upsc hp at localhost > battery.charge: 100 > battery.chemistry: PbAC > battery.voltage: 22.7 > driver.name: hidups > driver.parameter.port: /dev/usb/hiddev0 > driver.version: 2.0.5 > ups.delay.shutdown:

Hi Klaus, Thanks for your much appreciated feedback. Klaus Holler wrote: > Hello, > >I just wanted to report that the Back-UPS RS 800 works with the >Network UPS Tools. Currently I use the following (Ubuntu breezy) >debian packages on kernel 2.4.31: >ii nut 2.0.2-1build1 >ii nut-usb 2.0.2-1build1 > >lsusb reports: >ID 051d:0002 American Power Conversion Back-UPS Pro

Hi Scott, Scott Alfter wrote: > I had a UPS go bad recently (shuts off all by itself for no good reason, >AFAICT), so I bought a CyberPower 685AVR this afternoon. The two CyberPower >drivers in NUT 2.0.2 don't know how to talk to it, but the hidups driver >appears to work properly. This means you have to use USB instead of RS-232 (it >supports both), but at least it works. >

2006/1/13, Paul Mogren <fkamogee@yahoo.com>: > > This thread is FYI. I don't need any help here. > no, but some details for those who will read it, maybe ;-) I have SUSE 10.0 and an MGE Ellipse. I installed the NUT package from MGE. > > 1) The generated ups.conf pointed to a bad location: > /dev//dev/input/event0 > who generated that ? it seems like an old hiddev

is there a way to override the productid (like -x productid=1234) when using newhidups? just thought i'd try it with the F6C1500-TW-RK over usb. i was able to get hidups to work using the below settings, but it provides limited information. my ups.conf entry: [belkin] driver = hidups port = /dev/usb/hiddev0 and the output of upsc: gateway:/etc/nut# upsc

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

Hi! I've got a Mandrake 2006.0 machine and a APC Back-UPS Pro 500/1000/1500 (from lsusb). The Mandrake package version of nut is 2.0.1 and hidups actually detects the UPS, however I get loads of these: Sep 12 18:26:11 vader hidups[7658]: Ignoring x86 page event 0xff860080 (0) Sep 12 18:26:11 vader hidups[7658]: Unhandled event: 0x840058 (6) Sep 12 18:26:11 vader hidups[7658]: Unhandled

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

Good afternoon, I am trying to communicate with a new Tripp-Lite UPS via usb and having little luck. After more than a week on this I've decided to ask for help. I am very inexperienced at posting information to message boards, so hopefully I'm doing this right. I assume this is the correct place to post this message. I will start with the equipment I have. I am using Debian Sarge

Hello. So as my english is not so good, i'll try to write my story in bash commands :o) miwa@zork3$ uname -mrs FreeBSD 5.5-STABLE i386 miwa@zork3$ su root@zork3# cd /usr/ports/sysutils/nat root@zork3# make && make install root@zork3# cd ../nut-usb root@zork3# make && make install root@zork3# cd /usr/local/etc/nut root@zork3# cat ups.conf user=root [MGE-Ellipse]

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hello world; been using nut atop Debian GNU/Linux (sid) for about two years by now, my configuration broke as I upgraded the machine this morning (headin' for kernel 2.6 to have full support for the new GBE NIC included). I read through the UPGRADE.gz instructions provided with the Debian packages and tried to fix things according to the instructions pointed out there, but things still just

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE

I'd like to submit a patch to the 'hidups' driver. I'm a bit new to open-source development model, so I hope I'm not committing a faux paus by just posting it here. I did verify that the problem still exists (by source code inspection) in the latest dev snapshot, which is nut-2.0.3-pre2. I'm using nut-2.0.2 myself. The problem is when I'm connecting to my APC

I'm using an APC Back-UPS XS with nut 2.0.3. I've recompiled/reinstalled the source, and switched over to the newhidups driver (instead of the old hidups driver). I modified by ups.conf to use newhidups. The hotplug files were not automatically installed, I had to copy those from the scripts directory to my hotplug/usb directory. The newhidups driver loads find and then works for a

Hello, I have been trying to get a TrippLite Internet Office 750 UPS to talk to my Linux PBX for a couple of evenings now and I'm getting nowhere... I tried searching the list archives before posting here (I'm sure I'm not the first one to try to get this going) but they seem to be offline... The UPS is unfortunately USB based but I thought I'd give it a try anyway. Here is

I just installed NUT and my UPS is an APC Back-UPS ES 500. I looked in the list of drivers and found APC Back-UPS ES 350 listed in "drivers.txt" -- that list said I should use either the newhidups or hidups driver. I looked in the installation and I found headers and c files to create these drivers (I think), but in /usr/local/ups/bin there is no driver named, "newhidups or

Hello all, Has anyone had any luck getting a CPS GS 1500U working with NUT via USB. Its branded Geek Squad (don't ask) but it shows up in the USB device list as the CPS 1500U. I'm running Kubuntu Dapper with all current updates installed, Kernel 2.6.15-26-686, NUT 2.0.3. I've tried hidups and newhidups. With hidups I used port=/dev/bus/usb/001/004 which I'm sure is the UPS