similar to: Network UPS Tools version 2.0.3-pre1 released

Network UPS Tools version 2.2.2-pre1 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.2/testing/nut-2.2.2-pre1.tar.gz - News: http://www.networkupstools.org/source/2.2/testing/new-2.2.2-pre1.txt - ChangeLog: http://www.networkupstools.org/source/2.2/testing/ChangeLog Arnaud and the NUT team -- Linux / Unix Expert R&D -

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

2006/10/2, Peter Selinger <selinger@mathstat.dal.ca>: > Arnaud Quette wrote: > > > > 2006/9/29, Peter Selinger <selinger@mathstat.dal.ca>: > > > > > I don't really understand the purpose of the "Testing" branch. It has > > > not been touched since July, as far as I can see. I also don't > > > understand NUT's release

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Network UPS Tools version 2.2.1-pre1 has been released. http://www.networkupstools.org/ Note that a transition is underway for both the NUT domain name and the webserver. So you might face few minor problems... USB UPS owners are also warmly welcome to test the shutdown function of their device. Direct access: - Download: http://www.networkupstools.org/source/2.2/testing/nut-2.2.1-pre1.tar.gz

2006/3/27, devzero@web.de <devzero@web.de>: > ... > ps: > Furthermore, there seems some inconsistency between driver.list and website: > > # Network UPS Tools driver.list > # > # This file is used to build the compat.html on the web server. Any line > # with exactly 4 arguments will be turned into an entry on there. > # Naturally, it is read by parseconf, so the

Hello, I'm using NUT to manage a MGE Ellipse ASR UPS, with the newhidups driver. It works fine, except that after a few hours, I get a few errors from the kernel and the driver dies. Here's the output from the syslog: Apr 26 02:00:41 ezquiel kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255 ret -110 Apr 26 02:00:43 ezquiel last message repeated 2 times

Hi people. I'm trying to config a: MGE ELISE PREMIUM 1200 NT 02 Serial Nr. 92HE04008 With its serial cable into /dev/ttyS0. I had configured ups.conf, with no luck. Here is my ups.conf: [upscura] driver = mge-shut port = /dev/ttyS0 desc = "UPS" The permissions into /dev/ttyS?: crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 crw------- 1 nut nut 4, 65 mar 8 18:42

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hello, we have a MGE Pulsar Evolution 800 connected to a Fedora Core5 Server using a serial cable. Installed and configured properly are RPM versions of nut-2.0.3-0.1.fc5 nut-client-2.0.3-0.1.fc5 nut-cgi-2.0.3-0.1.fc5 which all work (mostly) fine. The server is connected to outlet.0 and properly shuts down when it's loosing power after around 20 minutes. It also boots up whenever the ups

fellows, I'm preparing the 2.0.5 release (as always, the Christmas release). I just wanted to be sure: - everybody's in sync (Carlos, IIRC you had some megatec things underway?!) - that the brief NEWS message fits everybody (analyzing the real diff between the Testing+trunk backport and the last trunk backport over Testing was a mess). Since I'm on vacation for a week as of next

Hello Fabian, > I got my UPS (Belkin F6H350deUNV) to work with the "megatec" driver. > Obviously the de/uk part in the name of these products are > localizations of some sort. So the F6H 350/500/750 UNV Home Office > products should all work with that driver. > > bigone nut # upsc ups@localhost > battery.charge: 95.0 > battery.voltage: 13.50 >

Hello everybody I'm new to NUT till now just listen. I want to install NUt and to check the package I need the gpg key. >From where can I dowload it to verify the package. Thank's in advance And sorry for this banal question. Karoly

Hi, Our research group is planning to buy an MGE Pulsar Evolution 3000 to protect our operational computers against power failures with an SNMP network management card. We would like to connect the UPS only through its network card (and not via USB or serial cable to another computer) and install the NUT software (client+server) on each machine to catch the shutdown SNMP signal from the UPS

Hi, I just got at work an MGE UPS Comet EX RT 7 and I can communicate fine with it through mge-shut, it detects correctly when on battery. I am using Nut 2.0.3 on Linux (RHEL 3). I am trying to simulate a low battery condition to test my shutdown procedure by setting lowbatt to 98%: driver.parameter.lowbatt: 98 but the ups reaches this value, goes to 97% and still no LB. I tried to change,

Hello, I'm currently try to get newhidups running with the newhidups driver from nut 2.0.2. After some USB issues (usb_claim_interface() works only as root so far) newhidups is recognizing the device. Though it doesn't detect any state changes, meaning when I run the battery test mode it's not recognized. I wanted to try the CVS version but it seems anonymous CVS is broken. The

Hi Andy, I've forwarded your info to the development list, and Carlos Rodrigues (the megatec driver author and maintainer. As a side note, there is a megatec_usb driver underway. You might want to give it a try. @Carlos: I let you update the drivers.list. Thanks for your report, Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader -

I'm getting dmesg flooded with messages like this one: usbdevfs: usb_submit_urb returned -28 What's wrong? I'm using Linux kernel 2.4.32 and nut-2.0.3. The /etc/ups.conf contains [mgeups] driver = newhidups port = auto desc = "MGE UPS" Cheers, Rodrigo -- *** Rodrigo Martins de Matos Ventura <yoda@isr.ist.utl.pt> *** Web page:

Hi all, First of all thanks for the great work on nut ! (despite it's not fully functional yet overhere). Everything seemed to go fine until the final test : shutdown the UPS ! The system is running FreeBSD 5.3, the UPS is MGE Ellipse 800 USBS both linked with the MGE serial cable. The system is a remote server, only running some file services and large disks. The porting,