similar to: Developing the UPS side of the UPS-NUT equation (via usbhid)

So, going with the proposed initial design, I created a report descriptor to describe the battery. I thought that I'd then see how NUT responded to it. The good news is that the descriptor showed up and all of the paths were correct. Unfortunately, after that, nothing happened...no reports were requested, and it just kept timing out. Is there some minimum amount of functionality I need to

Hello Charles! As promised, I just checked out the CVS and recompiled everything. In the attached .txt is what is coming out from my UPS. I am wondering about all those zeroes. Also, this morning I plan to connect the UPS to a Win box running the monitoring program supplied with the UPS (UPSilon2000) and a USB sniffer program. If you have any suggestions on what to look for in the data,

I've got a Powercom Imperial UPS, with an internal USB<=>serial converter. It implements the same protocol as other powercom devices implements, but only when talking over serial port (there's no such port on the device). Someone wrote a draft version of usbserial driver for it, and the UPS works with this kernel-level driver and with powercom driver from nut (using /dev/ttyUSBx

*********************** Your mail has been scanned by InterScan MSS. *********************** Has anyone managed to get this UPS to work? I am using the laster development nuts. My /proc/bus/usb/devices content: ==== cut ==== T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=ffff ProdID=0000 Rev= 1.00 S:

Hello, I have a question about HABTM and counting records. I have these models class Sort < ActiveRecord::Base has_and_belongs_to_many :reports end class Report < ActiveRecord::Base has_and_belongs_to_many :region has_and_belongs_to_many :subjects has_and_belongs_to_many :sorts end And i would like to get a count like @sort.reports.count The problem is get this query:

Hello everybody! I am trying to get an Atlantis-Land OnePower Line Interactive S1501 UPS (actually it is made by Ablerex) to talt to my Linux box through its USB port (no more RS-232...), either using the supplied program (UPSilon2000, works under Win and Linux) or whatever else. The UPSilon2000 program apparently works OK *if* it can talk to the UPS via a serial port; since my UPS has

Hello everybody! I am trying to get an Atlantis-Land OnePower Line Interactive S1501 UPS (actually it is made by Ablerex) to talt to my Linux box through its USB port (no more RS-232...), either using the supplied program (UPSilon2000, works under Win and Linux) or whatever else. The UPSilon2000 program apparently works OK *if* it can talk to the UPS via a serial port; since my UPS has

I''m using puppet-dashboard 1.1.0-1 on Ubuntu. I remove old reports using this command: nice -n +1 rake RAILS_ENV=production reports:prune upto=1 unit=mon This seems to work fine, and the amount of reports returnd by this mysql query seems to drop by the proper amount: select count(*) from reports; Right now it returns a value of 12591. So far so good. The problem is the

I have a Belkin F6H500ukUNV ups that I am attempting to get working under nut, however it does not appear to be detected by nut, I'm assuming that I need to feed some information back to you guys to get it included in the database somwhere. I've included (what I can think might be) the relivant outputs. Please let me know if you require anything else. dmesg output /sbin/newhidsups

Charles, Thank you so much for the information. I'm trying to digest it along with the other docs I have, the example code from Microchip, and a USB HID tutorial I found online. So, if I understand correctly.... When the device first connects, it sends a huge dump of data (which the usbhid driver shows when you use the debug option) which fully describes the data it is capable of sending.

On Mar 7, 2014, at 11:24 AM, Rob Groner wrote: > Charles, > > Thank you so much for the information. I'm trying to digest it along with the other docs I have, the example code from Microchip, and a USB HID tutorial I found online. I realize that some of the descriptions can be a bit vague, so if you want to post a link to the HID tutorial, I can try to describe what is going on

Here's the latest batch of words to get shipped out to Allison Smith. Please submit reasonably small changes to me by tomorrow 10:00 AM Eastern time, and I'll add them. As usual, donations to what will be a ~$110 USD expense would be appreciated, as I am paying for this round out of my pocket. Please send to paypal address "jtodd@loligo.com". I did not include all

On Mar 6, 2014, at 3:55 PM, Rob Groner wrote: > To make this UPS as easy to use as possible for the end-user who chooses Linux, I figured I would just completely implement the official USB HID UPS spec. That way no subdriver would be needed, or at least very little. At the moment, we use USB VID and PID to select which HID-to-NUT tables to consult (since some vendors have "custom"

An error I managed to hit today, trying to migrate puppet dashboard from 1.2.2 to 1.2.4 (after upgrading the master to puppet 2.7.9 seemed to prevent the dashboard from importing new reports). I''m trying to re-run it now, but as you might guess, the DB is pretty huge and the process takes a while to execute. Executed from the puppet-dashboard directory: sudo rake db:migrate

With ggplot2, I can plot the glm stat_smooth for binomial data when the response is binary or a two-level factor as follows: data("Donner", package="vcdExtra") ggplot(Donner, aes(age, survived)) + geom_point(position = position_jitter(height = 0.02, width = 0)) + stat_smooth(method = "glm", family = binomial, formula = y ~ x, alpha = 0.2, size=2) But how can I

I have updated my laptop to 7.4 CR this morning and found that there have been a lot of logs on two fronts for the first time. 1. The kernel has indicated overheating: [Sat Aug 26 08:58:21 2017] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1) [Sat Aug 26 08:58:21 2017] CPU4: Package temperature above threshold, cpu clock throttled (total events = 1) [Sat Aug 26

My company is developing a new UPS, with smarts provided by a PIC32 Microchip micro-controller. The controller comes with a demo for a USBHID-UPS, and after some tweaking, I was able to get NUT to recognize it and start showing some reasonable values. To make this UPS as easy to use as possible for the end-user who chooses Linux, I figured I would just completely implement the official USB HID

Hi Everyone, I am uncertain that I am writing the contrast statements correctly. Basically, I'm unsure when to use a -1 and a 1 when writing the contrasts. Specifically I am interested in comparing the slopes between different temperature regimes. Temperature is therefore a factor. Time and percent are numerical. Using the gmodels package I made the following model:

Hi! Im running FreeBSD 9.1 on a AMD APU machine: CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1699.36-MHz K8-class CPU) FreeBSD 9.1-RELEASE-p1 #0 r243379M: Fri Mar 8 23:16:44 CET 2013 root at pean.org:/usr/obj/usr/src/sys/GENERIC I try to use amdtemp(4) to read the temperature of this CPU but it doesnt seem to detect the CPU. The manual states that it should support K8-class. The

Hi I am using R version 2.7.2. on a windows XP OS and have a question concerning an analysis of covariance with count data I am trying to do, I will give details of a scaled down version of the analysis (as I have more covariates and need to take account of over-dispersion etc etc) but as I am sure it is only a simple problem but I just can't see how to fix it. I have a data set with count