similar to: RAID readonly before final shutdown

Hello Everyone, First time CentOS poster :) I have CentOS 4 installed on the head node of a Sun Gridengine cluster set up in a RAID. The head node has four hard drives, and I assume that drives 1 and 2 are in a raid and then drives 3 and 4 are in another raid. I was trying to expand the OS partition on drive 1 because it was full. I took drive 1 out, put it in my Fedora 8 box as a secondary

Hello fellow xenophiles and happy new year! I''ve documented the install procedure for a prototype server here since I found no similar document Anywhere on the net. It''s a Sarge-based Domain0 on linux root raid from scratch, using LVM to store the data for the domU mail server and its mailstore. I humbly submit my notes in the hope that they are useful to some weary traveller.

I have read the NUT document /usr/share/doc/nut-2.2.0/docs/shutdown.txt And in particular the section called "RAID Warning". In response to this section I have added the two lnes, but haven't yet tested it: mdadm --readonly /dev/md0 mdadm --readonly /dev/md1 into /etc/rc.d/init.d/halt Thus: ----------- # Remount read only anything that's left mounted. # echo

̨Íåºê´ó¹ú¼ÊÉÌó¹«Ë¾³ÏÑ°¹óµØºÏ×÷»ï°é£¬ÏúÊÛµçÄÔ¡¢Åä¼þ¡¢ÊÖ»ú¡¢±Ê¼Ç±¾µçÄÔ¡££¨²Î¿¼¼Û¸ñ±íÈçÏ£© ÎÒ˾±£Ö¤²úƷΪȫÐÂÔ­×°,»õµ½¸¶¿î¡£Óв»Ïê¿ÉÀ´ÈËÀ´µç×Éѯ£º ÁªÏµÈË:³ÂÊÀ½Ü µç»°:013850704389 Ò»¡¢Ä¦ÍÐÂÞÀ­ µ¥Î»/Ôª T189--400 T190--350 T191--500 C289--550 T2988--350 A388--1600 A6288--1300 V70--2000 V8088--800 V998++ --700 V60+ --1200 V66+GPRS--950 ŵ»ùÑÇ 3310--400 3330--450

Hello, since I had delayed the programming of the UPS Device part, now it is time to continue... My Device is "24 V DC modular ATX PSU" which replace the standard ATX Power Supply in PCs and use 15-43 V Input Voltage. The microcontroller is a TI LM3S5T36 Cortex M3 and I get the "UPS" infos using up to 4 Maxim DS1780 and some I?C current sensors. The ATX PSU has 4

Hello, Since I have now nearly all stuff running on my LH7A404 and now I am working on my DS80C411, I like to know, whether NUT show the APC UPS stats like the APC tools. Currently I do not know, HOW NUT triber the USB-Poert to get out the infos of the UPS. In theory I do send out only arround 5-60 lines of data which then NUT or any other programs must parse or something

Matt Nelson <MNelson at sequenom.com> reported a problem using the Hmisc library that did not occur with versions of R before 1.6. I am running platform i686-pc-linux-gnu arch i686 os linux-gnu system i686, linux-gnu status major 1 minor 6.0 year 2002 month 10 day 01 language R > library(Hmisc) > g <-

Hi is there a automatic way that long distances between points are not connected. I have something like plot(x,y,type="o",...) atx <- seq(as.Date("2009-04-01"),as.Date("2011-04-01"),"month") axis.Date(1, at=atx,labels=format(atx, "%b\n%Y"), padj=0.5 ) but I do not want lines between points whose distance is greater than two weeks. thx

Hi i´m starting to work with free software (with free as in freedom) i've been working with GAMS (General Algebraic Modeling System) to solve static and dynamic optimization problems and non-linear large systems of equations i'm wondering if there is any free software and documentation on the subject, wether in R, Maxima, or something else i will appreciate any help and any references

Full_Name: Kem Phillips Version: 2.7.1 (2008-06-23) OS: Windows Xp professional Submission from: (NULL) (98.221.200.108) The Hmisc function describe fails, giving the error message: Error in formatDateTime(dd, atx, !timeUsed) : could not find function "format.dates" Loading the chron package, where function dates apparently resides, does not fix the problem. Note

Hello Developers and *, I am working on a "24V DC ATX PSU" for Photopholtaik Systems which can have input voltages from 18V to 27.7 Volt and is entirely modular, which mean, you can select the desired module/s (up to 6) from ATX (96/144/240/300W), P4 (144W), SATA (82/305W) and Device (34/68/136W) And last not least, I want to build a "PowerWhatch" module which should be

Sorry, this is going to be a rather long post...Here's the situation; I have 4 IDE disks from an old snap server which fails to mount the raid array. We believe there is a controller error on the SNAP so we've put them in another box running CentOS 5 and can see the disks OK. hda thru hdd looks like this Disk /dev/hdd: 185.2 GB, 185283624960 bytes 255 heads, 63 sectors/track, 22526

Powerful enough to run a small asterisk server though not sure if the drop down in size from a mini-atx or a micro-atx but I'm sure someone will try. http://www.geek.com/first-look-via-px10000-pico-itx-motherboard Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial). --------------

After contacting Asus, MSI and Gigabyte, this is what I got back. Only motherboards with the QXX chipsets and certified with the Intel VPro support the Vt-d virtualization technology. I''m not sure about MSI though, because this is what I got from their support: "Almost board could support. Please refer to our website, http://www.msi.com/product/mb/." The problem is that

Hi all, I have this problem with lattice that xyplot() won't draw some of my axis labels if the type (i.e. the relation argument) of scales is set as free. For example, in the plot below, I would want it to also show: 1. the labels E1,...E6 below the 10th panel (i.e. 3rd row, 2 col)....just as it is now done below the 12th panel.... 2. as well as the labels (2,4,6,8) on the top of panels 1

Hi everybody I'm booting a diskless workstation using nfsmount (included in the initial ramdisk). First time I try to boot the diskless node, it says this error: "nfs: server 192.168.1.33 not responding, timed out nfs: server 192.168.1.33 not responding, timed out mount: I/O error short read: 0 < 28" althought in the /var/log/syslog file of the server appears the message:

HI! I would like to introduce new patch which adds new config option "AuthOrder2" to sshd_config. I would like to say that I only modyfied the patch made by Carson Gaspar. If you want to know more about this patch see thread at: http://marc.theaimsgroup.com/?l=openssh-unix-dev&m=98577021011067&w=2 I will appreciate any feedback from you. This patch is against 3.1p1. BTW:

But the main question hasn't been answered: Why is /usr/local placed before user-specified paths? Hypothetical example: You want to link against OpenSSL 0.96 for OpenSSH, but /usr/local contains 0.95, which is needed for something else. (Assume it comes binary only on Solaris for the sake of argument...) --Matt > -----Original Message----- > From: Damien Miller [mailto:djm at

Can someone please tell me how to configure Centos/Linux so it shuts down properly by pressing the Power button on the ATX cabinet, just as if someone had given a shutdown -h now command. With regards. Sanjay.

Announcing a new release of the PmWiki Markdown extension.[1] This release introduces an improvement in page rendering, examples of syntax,[2] and better support for Atx (up from none). I have also established a page to help keep interested parties informed of changes, to include a discussion group.[3] There are still problems with loose lists and blockquotes, but this is a 0.2 release. The syntax