similar to: usb ups on openindiana

On 11/9/2013 5:24 AM, Jim Klimov wrote: > Hello all, > > I am trying to set up my brother's UPS (remotely over internet) > on an OpenIndiana-based storage box. According to him, the UPS is > probably an Ippon Back Power Pro 600 dated around 2003 (battery > recently replaced), and it has an USB connection. > > Sorry for a relatively long post with a log of my successes

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

Hello! I'm trying to use nut with a Ippon Smart Winner 3000 UPS (http://shop.key.ru/photo/items/45535.jpg) which looks like a custom-labeled OEM model of the megatec branch. I tried both the megatec_usb and the blazer_usb drivers for it, with a obvious config section: [ippon] driver = blazer_usb port = auto vendorid = 06da productid = 0003 desc = "Ippon Smart Winner 3000" If I

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hi! Charles. This is the output with 'explore' # ./usbhid-ups -DDDD -u root -x explore -x vendorid=06da -a CENER_LA900_usb Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '4' 0.000676 upsdrv_initups... 0.288980 Checking device (06DA/0002) (008/004) 0.316956 - VendorID: 06da 0.317057 - ProductID: 0002

Hi again, I've succeeded in compiling the svn trunk with the automake tools and wish to say thank you to Charles Lepple for his help. After fixing some parameters in the hotplug script I can now get access to the UPS on /dev/usb/hiddev0 (I added productid and vendorid of my ups to the usermap). I've decided to try the newhidups driver with -x generic parameter and got this response :

On Dec 11, 2014, at 5:43 AM, janc at telefonica.net wrote: > 0.339329 Entering libusb_get_report > 0.342986 Report[get]: (2 bytes) => 01 00 > 0.343085 Path: 008c0001.008c0003, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 0 > 0.343120 Entering libusb_get_report > 0.346953 Report[get]: (2 bytes) => 02 00 > 0.346993 Path: 008c0001.008c0002,

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

Hello i need your help regarding the following issue : i have a hero touch ups from infosec. it is connected via USB to a raspberry pi 3. i?ve configure ups.conf file as below [HERO] driver = blazer_usb vendorid = 0665 productid = 5161 either with port = auto or port = /dev/hidraw0 or port = /dev/ttySo the connection never works i get the

This is the output with line power turned off. # ./usbhid-ups -DDDD -u root -x explore -x vendorid=06da -a CENER_LA900_usb Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '4' 0.000563 upsdrv_initups... 0.299203 Checking device (06DA/0002) (008/003) 0.327122 - VendorID: 06da 0.327217 - ProductID: 0002 0.327261 -

Hi, I have a small home-use UPS for my home server from powerwalker (http://powerwalker.com/de/index.php?option=com_content&task=blogcategory&id=63&Itemid=106 sorry I only found a german version). It has a USB and a serial connector. lsusb lists it as "06da:0003 Phoenixtec Power Co., Ltd", in /proc/bus/usb/devices it sais "Manufacturer=OMRON" and

Hello, I had snv_111b running for a while on a HP DL160G5. With two 16GB USB sticks comprising the mirrored rpool for boot. And four 1TB drives comprising another pool, pool1, for data. So that''s been working just fine for a few months. Yesterday I get it into my mind to upgrade the OS to latest, then was snv_127. That worked, and all was well. Also did an upgrade to the

Hi All, I installed snv_b81 in my portable hard disk(capacity 160gb with 2 partitions, one for solaris and other for windows). When I tried to boot into dom0 from grub, I got the following errors and the system gets hanged. Warning : No SOF interrupts have been received, this USB EHCI host controller is unusable panic[cpu0]/thread=f502ae20:cannot mount root path /pci@0, 0/pci8086, 5641@1d,

Hi All, over the last couple of weeks, I had to boot from my rpool from various physical machines because some component on my laptop mainboard blew up (you know that burned electronics smell?). I can''t retrospectively document all I did, but I am sure I recreated the boot-archive, ran devfsadm -C and deleted /etc/zfs/zpool.cache several times. Now zpool status is referring to a

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

Hello. I recently upgraded from Ubuntu Maverick to Natty and hence upgraded nut from 2.4.3-1ubuntu5 to 2.6.0-1ubuntu3. My Sven PowerPro+ 1000 UPS ( http://en.sven.ru/catalog/ups/power_pro_plus_1000.htm ) worked fine with the previous version, using megatec_usb driver, but doesn't work with the current version, since megatec_usb is no longer available. Here is the output from blazer_usb.