similar to: [HCL] Forza FX-1500LCD supported by blazer_usb

Hi to everybody. Some days ago, I bought an UPS by Forza Power Technologies, model SL-1001. This Forza SL-1001 is line-interactive, has 14,4 A/h charge and is rated at 1000VA. Before, I had a TrippLite Omni 500 (or something like that), a simple contact-closure UPS, and I used nut with the simple genericupsdriver, so I'm new with this type of UPSs. NUT doesn't list Forza as a

I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. I looked a the list and didn't see a driver for it: http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton I see a driver for the 9130; any idea whether it will work with a 9125? Any other ideas for connecting the 9125 to a FreeNAS

On Sep 19, 2014, at 4:03 PM, Nello Lucchesi <nello at octobergroup.com> wrote: > I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. > > I looked a the list and didn't see a driver for it: > > http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton > > I see a

Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups. with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This

Hi, I'm trying to disconnect some iSCSI targets, but can't seem to. [root at localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1

I have 2 APC UPS systems, one is connected to my ESXi host and the other to my FreeNAS. The battery for the FreeNAS will run out before the battery for the ESXi, so I need ESXi to shutdown first. If I wait until BatteryLow on ESXI, it will be too late as FreeNAS will have already shutdown. How can I change the configuration on ESXI to shutdown after a small delay so that it is done before

I'm trying to create a 500GB lv volume on a 500GB physical volume, but can't: [root at francois-pc ~]# pvscan PV /dev/sdd VG freenas lvm2 [500.00 GB / 500.00 GB free] PV /dev/sdc VG thecus lvm2 [1010.00 GB / 910.00 GB free] PV /dev/mapper/ddf1_RAIDp2 VG VolGroup00 lvm2 [931.25 GB / 0 free] Total: 3 [2.38 TB] / in use: 3 [2.38 TB]

Hi all, I’m new to NUT and have some trouble getting my new UPS to work. Since the HCL listed Powercom UHID models as „green“ I thought buying a Roline (German rebranded Powercom) model would be a good idea. The OS is FreeBSD: FreeBSD freenas-pmh.local 11.2-STABLE FreeBSD 11.2-STABLE #0 r325575+6aad246318c(HEAD): Mon Jun 24 17:25:47 UTC 2019 root at

On Sat, 11 Mar 2017 08:18:26 +0100 "Niels Dettenbach \(Syndicat IT & Internet\) via samba" <samba at lists.samba.org> wrote: > Am 11. März 2017 00:04:13 MEZ schrieb Andrew Walker via samba > <samba at lists.samba.org>: > >I don't believe that ZFS on FreeBSD supports acltype=posixacl and > >sa-based > > If you want to see a working samba / zfs

RPvs> On Tue, 1 Jan 2019 10:35:17 -0800 RPvs> Gregory Sloop via samba <samba at lists.samba.org> wrote: >> I'm working to put up a production FeeeNAS box tied to Samba/AD for >> authentication for users connecting to the FreeNAS share(s). In >> joining FreeNAS to the AD domain, one immediately runs into >> "problems" with TLS/encryption. RPvs>

Hello;I just came across NUT, testing FreeNAS/FreeBSD. I?m running at home a APC UPS connected to another computer, running apcupsd. I found out that NUT didn't talk by default to apcupsd, and there was a driver created relatively recently (apcupsd-ups), which filled in that gap. The version I found on my FreeBSD/FreeNAS system seems to imply that there is more to come to that driver (0.04)

On 2/5/2014 8:24 AM, Charles Lepple wrote: > On Feb 4, 2014, at 10:48 PM, Elliot Dierksen wrote: > >> NUT will complain endlessly about communication errors and never establish SNMP communication with my APC UPS > Hmm, at first glance, I read the "complain endlessly" part as a figure of speech, and figured SNMP would get there eventually since it's UDP. But if you have

I'm working to put up a production FeeeNAS box tied to Samba/AD for authentication for users connecting to the FreeNAS share(s). In joining FreeNAS to the AD domain, one immediately runs into "problems" with TLS/encryption. Samba, in the defaults requires TLS. I could disable TLS security in Samba, but that's probably not a great idea. So, I'll need a key/cert for the

I'm using FreeNAS 9.1, and I've just got an APC Back-UPS CS 500. In theory it's supported by NUT, but the latest released version (2.6.5) doesn't have support for it (the driver reports an error, which is apparently due to an overflow). According to a thread on the mailing list, Back-UPS ES series requires a fix that's in source control, and CS series requires an additional

Hello all, OS name: FreeNAS 9.3 NUT version: 2.7.2 NUT installed method: Bundled with FreenNAS 9.3 Device: EATON 5SC 1000 (http://powerquality.eaton.com/Products-services/Backup-Power-UPS/5SC.aspx?cx=5&wtredirect=www.eaton.com/5SC&GUID=B81251A4-F34E-4373-94B3-B4FB3D0CBCA8) Problem description: This was originally reported as bug to FreeNAS

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

Good afternoon all. I have an odd problem that has me stumped and I'm hoping someone here may be able to help. Recently I switched from a Gentoo Linux based OS to FreeNAS. The version of Samba running on FreeNAS is 3.5.5 (and was the same under Linux). I mainly use my FreeNAS/Samba box to share MP3 files to an Audiotron. One of the files is the Turtle Beach radio file, radio_tr.txt. When I was

On Aug 18, 2013, at 12:14 AM, Lyndon Drake wrote: > I'm happy to test an updated build, but have no idea about how to go about doing a build in the first place. Could someone help me in the process of creating a snapshot build for FreeNAS? I am not familiar with the specifics of building for FreeNAS, but our BuildBot instance is making source snapshots again:

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA)

On 2013–12–21 John Ferlan wrote: > On 12/17/2013 07:13 PM, Marco wrote: > > Hi! > > > > I'm new to libvirt and face problems connecting to an iSCSI target. > > What I intend to do is to connect libvirt (I tried virt-manager and > > virsh) to an iSCSI target and then boot from the LUNs which contain > > the VMs. > > > > I followed the