similar to: [HCL] Atlantis Land A03-P551(V1.2) supported by <blazer_usb>

I changed the driver from blazer_usb to nutdrv_qx, by editing /etc/nut/ups.conf. To apply changes, I did: # service nut-server restart # service nut-client restart Then I've run a second test, this time simpler than the first one described in my previous email; the test only consists in toggling off/on a wall switch which controls power to the UPS. This way, electric ground remains

Guess I can assume that my OnePower A03-S1001 just doesn't support the shutdown command. Might this be the case? -- Davide

On Tue, 13 Oct 2015, Davide Baldini wrote: > Guess I can assume that my OnePower A03-S1001 just doesn't support the > shutdown command. Might this be the case? If the UPS does shut down, then it will have to do so after a delay and not immediately on receiving the shutdown command. Does upsc <ups_name> report anything like ups.delay.shutdown: 30 ups.delay.start: 40

On Oct 2, 2015, at 9:01 PM, Davide Baldini <baldiniebaldini at gmail.com> wrote: > > When I manually unplug the mains, the computer waits 3 minutes, shutdowns, and there it stays. As per the above commands, issued from ups_events.sh, it is instead supposed to boot up after 6 minutes (360 / 60 seconds) counted from t?, the moment of the unplug. After 20 seconds from the shutdown, and

Thanks Roger, the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ; in particular: ups.delay.shutdown: 30 ups.delay.start: 180 However, the UPS does not shut down, not immediately nor well after the timeout of the command: upscmd -u admin -p mypass myups shutdown.return 360 -- Davide

On 10/14/2015 10:17 AM, Roger Price wrote: > What does "ps aux | grep ups" report? ps aux | grep ups nut 2902 0.0 0.0 20588 1140 ? Ss 00:10 0:02 /lib/nut/nutdrv_qx -a myups nut 2946 0.0 0.0 37632 1428 ? Ss 00:10 0:00 /lib/nut/upsd root 2970 0.0 0.0 37616 1436 ? Ss 00:10 0:00 /lib/nut/upsmon root 2973

On 10/14/2015 12:18 PM, Roger Price wrote: > Is there any command in the list provided by "upscmd -l myups" which is accepted > by this UPS? None of the command sin the list successfully completes, not even beeper.toggle. My list: # upscmd -l myups Instant commands supported on UPS [myups]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load

On 10/14/2015 06:11 PM, Roger Price wrote: > Is /etc/init.d/nut-client a Bash/Dash script? Is it possible to add the option to > the call of the driver in this script? Looks like some options can be passed: /etc/init.d/nut-client is a dash script and when it is started or restarted, it executes: start-stop-daemon -S -q -p $upsmon_pid -x $upsmon \ -- $UPSMON_OPTIONS >/dev/null

On Wed, 14 Oct 2015, Davide Baldini wrote: > the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ; > in particular: > > ups.delay.shutdown: 30 > ups.delay.start: 180 > > However, the UPS does not shut down, not immediately nor well after the > timeout of the command: upscmd -u admin -p mypass myups shutdown.return 360 What does "ps aux |

On Wed, 14 Oct 2015, Davide Baldini wrote: > upsdrvctl shutdown > ... > instcmd(shutdown.return, [NULL]) > instcmd: FAILED > Shutdown failed! > Driver failed to start (exit status=1) > > This time /var/log/syslog doesn't register anything about the UPS after > issuing the command above. Instead, It logged some errors after a > upscmd -u admin -p mypass

On Wed, 14 Oct 2015, Davide Baldini wrote: >> Is there any command in the list provided by "upscmd -l myups" which is >> accepted by this UPS? > > None of the command sin the list successfully completes, not even > beeper.toggle. It looks as if the problem is more general than turning off the UPS. The command mechanism is broken. > I added -q and -D to

Hello, my Atlantis UPS (model on "subject" line) fails to cycle off the outlet power after a power failure on the mains followed by an automatic shutdown of the computer. The UPS simply remains always on, preventing the computer from restarting. ** Setup: ** Nut version 2.7.2 Nut driver blazer_usb Linux 4.1.1 The config files are pretty default; the peculiar customization is

2013/12/9 Fabio Cecamore <ceca_89 at hotmail.com>: > and the UPS don't wake up after the whiteout.. 2013/12/6 Fabio Cecamore <ceca_89 at hotmail.com>: > desc = "AtlantisLand Host Power 851+" Is your UPS an 'Atlantis Land Host Power 851' or an 'Atlantis Land One Power 841+'? The first one should be using a slighty modified version of the

Hi all, I've problem with the management of my AtlantisLand UPS, the UPS don't want to wake up after the whiteout and I don't have any idea why.. This is the ups.conf: [ups] driver = blazer_usb subdriver = cypress vendorid = 0665 productid = 5161 port = auto desc = "AtlantisLand Host Power 851+" pollinterval = 10 offdelay = 60 this is the upsc result: battery.charge: 100

- OS name and version: Ubuntu 12.04 - exact NUT version: 2.6.3 - NUT installation method: from Ubuntu package "nut 2.6.3-1ubuntu1.1" - exact device name and related information: AtlantisLand Host Power 851 (A03-HP851 rev.1.1) - driver: blazer_usb I have no problems with the operation of NUT. My only problem is that I would like to change the behavior of the NUT driver

I haven't been able to find any help on this and am really struggling. I've been using RODBC 1.1-3 and R(D)COM v1.35 for a little over a year successfully with my Access Database, and now im switching to Oracle 9i. I use R 2.0.1 on a Windows XP platform, 1GB ram, 2GHz Intel Processor) When I connect through the Rgui R console, the connection is successful (but through VB the attempt

Hello, I have a problem. It seems all is right, but my Atlantis UPS don't shutdown.

2013/12/6 Fabio Cecamore <ceca_89 at hotmail.com>: > Hi all, Hi > I've problem with the management of my AtlantisLand UPS, the UPS don't want > to wake up after the whiteout and I don't have any idea why.. Some (very old) units are known to have problems with small values for ondelay (hence the default 3 minutes value):

Thanks for your reply Hyouko, these are the actual not working parameters: driver.parameter.offdelay: 60 driver.parameter.ondelay: 5 ups.delay.shutdown: 60 ups.delay.start: 300 and the UPS don't wake up after the whiteout.. My UPS is not so old :( Il 09/12/2013 16.04, hyouko at gmail.com ha scritto: > 2013/12/6 Fabio Cecamore <ceca_89 at hotmail.com>: >> Hi all, > Hi

Hi, all: Two questions. Environment: Ubuntu 12.04 1) mount: unknown filesystem type 'smbfs' With default Samba 2:3.6.3-2ubuntu2.3 installed, all the following 3 commands failed: a) $ sudo mount -t *smbfs* -o username=MYNAME,password=MYPWD //mybooklive/myfolder /media/smb/ mount: unknown filesystem type 'smbfs' b) /media$ sudo mount -t *cifs* -o username=MYNAME,password=MYPWD