similar to: ups.conf configure

hello, anyone has worknig ISDN hfc-pci card in DDI (DID) point2point mode? what kernel ? and second question mISDN driver .. anyone has working solution with mISDN and maybe fritz card? what you suggest for DDI -> point2point mode (card,kernel,chan_..., ...) ? thank you, Tomaz

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

hi! anyone has a idea how to send caller id (incoming number) to shell script like: exten => s,1,wait,2 exten => s,2,System(/bin/script callerid-number) exten =>s,3,answer i need to run script in shell with command line like "/bin/script -a 123456789 " this 123456789 must be callerid (incoming call) number. tnx, Thomas

I can confirm this in a slightly different setting, but still using two-way sync between two dovecots. On e is 2.3.19.1 running on macOS Monterey, the other is 2.3.20 running in an alpine container on Ubuntu. Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda>) R&A IT Strategy <https://ea.rna.nl/> (main site) Book: Chess and the Art of Enterprise?Architecture

It might have a noticeable effect on clients. I encountered (probably triggered by this in some way?) that I was unable to het the 'read' bit set in macOS Mail.app. Maybe (as I am doing HA with round robin) the Mail.app client got to one dovecot repository on one tcp connection and then on the other. Is there a reason why syncing tis move from new to cur is a bad idea? Gerben Wierda

Hi paulr Thanks for your reply. Though DWARF info give me the code address ranges, there might be inline data. If so, how to handle this case? As for the dwarf line table. Sometimes, the source line might be zero. Do you know why? If all instructions should be describe in the line table, I think analyzing Dwarf line table is enough to get all the instructions addresses. Do you agree? I would

Hello, I have a UPS connected to my server with the following: Server is Suse 10.1 Nut version is?Network UPS Tools - Generic UPS driver 1.32 (2.0.4) I installed this around 2005 and cannot remember how I installed the software. ups.conf: [sdrups] driver = genericups port = /dev/ttyS0 desc = "For Server & Backup" upstype = 9 upsd.conf: ACL all 0.0.0.0/0 ACL localhost

There should be a line-table entry for the end of the function, which appears to be missing from the dump you provided. llvm-dwarfdump should report this address with 'end_sequence' in the Flags. Are you using a different dumper? I am not sure but my guess would be that inline data is not represented in the line table. The line table's primary purpose is to inform the debugger

Unfortunately, almost all the Windows programs I want to run under Wine need to access the COM: ports, and I cannot get any of them to run. Typically, I get stuff like this ... fixme:comm:EscapeCommFunction16 no cid=0 found! fixme:comm:EscapeCommFunction16 no cid=0 found! err:comm:COMM16_ReadComplete async read failed 000003e3 fixme:comm:EscapeCommFunction16 no cid=3 found!

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

Hello, I have a question in regards to specific dovecot replication behaviour and I'm just wondering if this is actually an expected/normal behaviour, or just a version issue. I'm using dovecot 2.3.16 which is packed by default with latest Ubuntu 22.04.1 LTS server release. I setup dovecot replication pair (mx1 - mx2) which is working ok. MX1 has priority 10, MX2 has priority 20. I

hi! Anyone on list has working asterisk box with hfc based card (bristuff) and a x100p adapter? Becouse together in box I can't get it working in any way .. thank you, Tomaz

hi, when i call asterisk (on x100p) i got this : CLI> -- Starting simple switch on 'Zap/7-1' Jul 13 15:03:34 ERROR[311316]: callerid.c:192 callerid_feed: fsk_serie made mylen < 0 (-9) Jul 13 15:03:34 WARNING[311316]: chan_zap.c:4735 ss_thread: CallerID feed failed: Success Jul 13 15:03:34 WARNING[311316]: chan_zap.c:4777 ss_thread: CallerID returned with error on channel

I upgraded R on windows xp from 2.12.2 to 2.13.1 and now I can not process Rnw files with windows cp1250 encoding. Sweave complains: file.Rnw declares an encoding that Sweave does not know about What can I do beside downgrade R? When will Sweave support more encodings? Has anybody found a solution? Regards, Tomaz

I'm not familiar with the target instruction set, but if "MOV PC, R0" is not a return instruction, I'm guessing that the sequence starting at A39C is a dispatch through a jump table. The jump table would be considered part of the instruction stream and included in the scope of the line table. This is not a case where you would see end_sequence; my mistake. The line table does

> +22 = Gamatronic UPSs with alarm interface > + [CP=RTS] [OL=CTS] [LB=\-DCD] [SD=DTR] > + > +22 = CyberPower SL seriess > + [CP=RTS] [OL=CTS] [LB=\-CAR] [SD=DTR] > + > + This part of the patch is no good. While TIOCM_CAR is equivalent to TIOCM_CD (at least in some implementations) CAR certainly isn't handled the same as DCD by genericups. It won't be

Hello. Has anyone been able to successfully make data (dialup modem) calls through a TDM2400E? We're able to make fax and credit card calls fine, but cannot successfully make modem calls using a 56K modem connected to a patch panel connected to an FXS port which then gets bridged to an FXO port connected directly to a phone line. We have 'echocancelwhenbridged=no' set in

I tried to find a search button for the mailing list but could not. So rtfm me with the link please. If not.. I have an old Deltec PowerRite Pro 2 UPS which has a 9 pin serial cable. By trial and error Im pretty sure I found LB = DCD, but can not get the combination for OB / OL. No matter what I do I get the results below. driver.name: genericups driver.parameter.CP: CTS driver.parameter.LB:

hi all! Is it possible to trigger some external device trough parallel port or. serial on some caller id ? or if it's possible tu run some external (linux) program on specific caller id ? OR if anyone have idea how to open the doors with asterisk :) by, Thomas

hello, i have a problem starting asterisk with one x100p digium and two hfc chipset isdn cards with bri-stuff.0.0.2. "ztcfg -vv" shows me a this info: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: