similar to: USB Belkin

I have checked in a cleaned-up version of patch #302111 (Belkin support) into CVS. See cvs diff -uN -r before_PSE_2 -r after_PSE_2 to check the difference. Here is the CHANGES entry: Tue Sep 13 20:50:14 UTC 2005 / Peter Selinger <selinger@users.sourceforge.net> - newhidups: added Belkin support. Also added some new variables and instant commands (some of these were already used by

Greetings; Its unk because whats plugged in seems to be blocking the rear name plate. About all I can recall is that its big, 3 battery unit, rated somewhere north ob 1250 VA. Its an 050D:0751 Belkin. What driver should I use, and what file is that set in? The nut version presently and freshly installed is from the Ubuntu 10.04.4 LTS repo's. Probably old, but IIRC it also worked with

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it

Zaid, I have a Belkin F6C800-UNV which has both a serial and USB connector. The serial connection is already working with the Belkinunv driver. I will connect via the USB and then compare both sets of variables. This should allow me to correlate and shed some light on the meaning of many of Belkin's non-standard "Usage" descriptors. With this information, it should be very easy

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

Have had no issue until I ran apt-get dist-upgrade this morning: # /lib/nut/newhidups -u nut -DDDDDD auto Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '6' Checking device (0000/0000) (001/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

hi i have a belkin ups here some setting chmod 0600 /dev/hiddev0 chown nut:root /dev/hiddev0 linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No matching USB/HID UPS found Driver failed to start (exit status=1) linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl -u root start

I just moved my UPS over from serial to USB and found that I needed to add it to the hotplug USB list to make things work. Belkin F6C120-UNV - Bus 002 Device 004: ID 050d:0912 Belkin Components It seems to be working OK on 2.0.4 with newhidups. Attached is a patch which I think should add the appropriate device id's in the right places to the trunk code. Jon -------------- next part

I have a new Belkin F6C900-UNV. I see that it's not listed in belkin-hid.c The VendorID is 0x050d like all the Belkin UPSes, and the ProductID is 0x0900. I haven't had a chance to actually test the development version of nut yet, since I'm running Fedora Core 6, which still has nut 2.0.3. `newhidups -DD -a myups` gives the error of: Checking device (050D/0900) (001/002) - VendorID:

On Oct 12, 2014, at 8:28 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Its unk because whats plugged in seems to be blocking the rear name plate. > About all I can recall is that its big, 3 battery unit, rated somewhere > north ob 1250 VA. > > Its an 050D:0751 Belkin. > > What driver should I use, and what file is that set in? Looks like it is in usbhid-ups. If

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Dean K. Gibson wrote: > > My Belkin UPS 1000 failed about a month ago; all of a sudden it > reported a battery failure. Since the Belkin logs showed this as in > instant transition from 99% to 22%, I assume a circuit board failure, > not a battery failure. Similarly, one Belkin UPS 500 circuit board > failed after I used my 100W amateur radio transmitter (not connected to

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

I would like to read data from two different folder and then combine this together the code which I have tried are as follows setwd("/Groups/data_first/") file_was <- list.files(path = ".", pattern = "v2.0.2.was", all.files = FALSE, full.names = FALSE, recursive = FALSE, ignore.case = FALSE) path<-c("/Groups/data_second/") file_wasaux2