similar to: Status of tripplite_usb driver?

Hello everyone, I have a Tripp-Lite UPS (smart1500rmxl2ua) I'm trying to get working with nut. This is a FreeBSD 10.3 box. I've tried using the usbhid-ups<http://networkupstools.org/docs/man/usbhid-ups.html> driver but everytime I try to start up nut, I get this: # upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4)

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

# usbconfig -d ugen0.2 dump_device_desc ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x09ae idProduct = 0x0001

Hello, I have a Tripplite SMART1500 UPS, and I'm having a little luck with the tripplite_usb driver. Only a LITTLE though. It's working better than any of the other drivers I've tried, but I'm not getting a status from it. Here's the output of upsc: battery.voltage: 0.00 battery.voltage.nominal: 36 driver.name: tripplite_usb driver.parameter.port: /dev/hiddev0

Hey all, I have a triplite 1050 and when I did a test today I saw that the battery bounce from 100 to 80 to 90 to 91 percent before UPSD lost its connection to the UPS. The server then decided that it was time to shut off. The UPS sat at 91% for about 5 min before UPSD lost its connection, so I'm not sure if it wasn't updating its battery.charge... I wasn't sure if this is

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

I see the link here <https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser>, but clicking it results in a 404. Before I waste everyone's time posting my question, I really wanted to search to see if it's been solved already. -------------- next part -------------- An HTML attachment was scrubbed... URL:

As I understand it from looking through the archives of this mailing list and the source for the driver, tripplite_usb should work for this device. I tried to go through the source as best I could to see if I could add support myself, but got a bit lost. Anyhow, here's hoping that someone has some experience with this model. My system is using the latest CVS checkout of the Development branch

On Sep 22, 2014, at 11:14 AM, Shade Alabsa <shade34321 at gmail.com> wrote: > These machines are exact replicas of each other and are fairly old and have a Core 2 Duo E8400 CPU in them. Is there anything else you need or anything I can do to help fix this? Thanks! Also, Barry Skrypnyk mentioned that Fedora was one of the Linux distributions that Tripp Lite claims to support. I recommend

Device manufacturer and name: Tripp-Lite OmniSmart500 upsc output: matt at backup:/etc$ sudo upsc tripplite battery.charge: 100 battery.test.status: Battery OK battery.voltage: 14.56 battery.voltage.nominal: 12 device.mfr: Tripp Lite device.model: OMNISMART500 device.type: ups driver.name: tripplite_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3

Charles, > What is the new behavior? The CentOS minimal install had different print statements and a broadcast message whenever the UPS was disconnected. The broadcast isn't really important. Below are the differences I pasted though I'm not sure if they are important, I just noticed they were different. Particularly the bolded parts which I think you alluded to in your email about

> > > 2.117586 send_cmd(msg_len=2, type='G') > > 3.219418 libusb_get_interrupt: Connection timed out > > 3.219474 libusb_get_interrupt() returned 0 instead of 8 while > sending 3a 47 b8 0d 00 00 00 00 '.G......' > > 4.219593 libusb_get_interrupt: Connection timed out > > 4.219661 libusb_get_interrupt() returned

Is it me, or is my USB not being recognized properly? tipper nut # ./tripplite_usb -DDD -u root -a tipper -x vendor=09AE Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '3' Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux

Model: Tripp-lite OMNIVS1500 Error: Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: unknown/unknown libusb_set_report() returned -1 instead of 8 Could not reset watchdog. Please send model information to nut-upsdev mailing

I got FreeBSD up and running last night (many thanks to Charles Sprickman for a ton of useful suggestions along the way), and took a look at tripplite_usb on an OMNIVS1000. The tripplite_usb driver basically sends old-school Tripp Lite serial commands to the UPS via HID SetReport packets, and receives responses over the first Interrupt IN pipe. Later UPSes seem to be more deterministic in this

Soon as I get back to that computer I will let you know which kernel version. Both were just recently installed, Fedora was installed specifically for this actually, though updates have been applied. I've tried it with other USB ports already across 5 different machines. I've also swapped out the USB cable for another one that I knew worked fine. I'll see what I can do about

He everyone, I have a Tripplite SMART700DVa using the tripplite_usb from NUT 2.5 (rev 2217) driver running in Solaris 10x86. My driver hangs when trying to connect. Once the driver sends the watchdog command ("W\0"), it can no longer receive any signals and eventually exits. The UPS responds to other watchdog commands ("W5" for example), but there doesn't seem to be

I upgraded the version of WINE on my RH7.2 system to wine-20011106-1.i386.rpm now any time I run the wine command I get the following: $ wine -v wine: error while loading shared libraries: libntdll.so: cannot open shared object file: No such file or directory That file is definitely there and readable: $ ls -l /usr/lib/wine/libntdll.so -rwxr-xr-x 1 root root 1175402 Nov 5 23:54

Hi, I'm using nut 2.2.1 on Ubuntu Hardy. Everything is fine, upsc works, upsmon is working. Then, after twenty minutes or an hour or maybe even longer, it all breaks down and I see these messages in the log: May 22 13:39:04 logicserver upsmon[28319]: Poll UPS [tripplite at localhost] failed - Driver not connected Restarting upsd fixes the problem temporarily. Any ideas? Thanks, Forest

Charles, So I installed a minimal CentOS 6.5 installation on the Fedora box this morning and I got the same issue. Below are the kernel versions used. CentOS 6.5 Minimal - [root at nemo tmp]# uname -a Linux nemo 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux [root at nemo tmp]# rpm -qa | grep nut nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64