similar to: MGE ELISE PREMIUM 1200,NT 02 Serial Nr. 92HE04008

I have an MGE Ellipse Premium 1200 that I connected to my server using its USB cable. Nut seems to be working fine. I've done a power down test and it worked and came back up when the UPS had power again. I'm using the newhidups driver and the USB cable. The problem I'm having is that if I boot with the cable connected newhidups says it can't find the UPS. If I unplug and plug in

My new MGE Ellipse Premium 1200 is now working fine. I've tested pulling the plug and the computer shuts down properly and comes back up when I replug. The only strange behaviour is that when I put the power back on the battery shows as being at 86%. If it was at 86% it should have lasted longer. Is there any calibration step I can do? The only commands the ups seems to support are: $ upscmd

Hi, My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port, usbhid-ups driver. Using simply KNotify about UPS connection states I noticed that sometimes unpredictably a notification appears that the USB connection to the UPS is lost and a few seconds later another notification appears that the connection is restored. And this repeats to infinity. The only way to get out of it is to

Hi, I''m looking for info about IFB devices and how I can use it to incomming traffic shapping. Has IFB any web about it? Do any body known where I can find more info about it? I found this: http://linux-net.osdl.org/index.php/IFB But I can''t stand fine how to use it to allow many ifb''s devices or how to use it with "tc actions". Any help? Thanks --

Hello all, I've got an MGE Pulsar Ellipse Premium 800 powering a couple of FreeBSD systems. Driver used is mge-shut, I don't know what the new mge-shut driver offers, but I follow the "if it works, don't fix it" dogma here. :) I also had a nut server installed on the master, with the /usr/local/etc/rc.d/nut script slightly modified to include a couple of upsrw commands

After varying degrees of success with p2p detection modules, I would like to write the following rules using iptables to reliably identify p2p traffic: 1. If a host on the network has 5 or more simutaneous tcp connections to ports above 1024, mark all connections to ports 1024 and above as 60. 2. If a host has received (or sent) UDP packets from 5 different hosts'' ports above 1024 in a

Oliver -- Your question was asked & answered on the theora@xiph.org list -- see my post: <p>-----Original Message----- From: Oliver Darvall [mailto:oliver@cura.co.za] Sent: Monday, January 13, 2003 2:38 AM To: theora-dev@xiph.org Subject: [theora-dev] Multiple Feed Vp3 <p>Hi, I have been using Vp3 for some time now to compress the video from a single video source. However, I

Hi, sorry for the question, i've been searching for a real time billing system for asterisk with zap/sip support, for use in post paid systems like "locutorios", do you know of or use any ? thanks -- patoVala Linux User#280504 Hablando en http://www.elprimoalcahuete.com "El tiempo cura los dolores y las querellas porque cambiamos. Ya no somos la misma persona. -- Blaise

Hi! I would like to thank very much for this great page with Kernel Packet Traveling Diagram and to suggest small update concerning IMQ. I think the sentence: "IMQ in input comes before nat so IMQ does not know the real ip address. Ingress comes after nat, so ingress knows the real ip address." could be more precise like that: "By default IMQ in PREROUTING comes before nat and

I'm back to trying to get my MGE Elipse (USB) talking to my FreeBSD system. It used to work fine on Linux (quite some time ago), and was sort-of working with the last release of nut. The system would see the UPS, but couldn't get reliable data from it. Now that I have upgraded to 2.2, I no longer see the UPS at all with nut. The usbdevs command shows it: drich at morpheus|505>

Hi, I have recently purchased MGE ellipse 1200 UPS for my home system. Obviously, the choice of this particular brand was mainly dictated by MGE's long-standing support for Linux and NUT project. The fact that the box was clearly the prettiest looking one on the block did help also ;-). I have had NUT tools installed and configured in no time, as I did it numerous times before -- kudos

Hi, I'm having a problem compiling the kernel as a normal user (don't know if not being root is the problem or not). What is ABI? I can compile with the flag --without kabichk, but I don't know if really is that the solution or not. The package build stops at this point: + echo '**** kABI checking is enabled in kernel SPEC file. ****' **** kABI checking is enabled in kernel

Hi, I'm not sure but I think I suffer under the same problem with a bit different setup with squeeze testing and xen 4.0rc5. In fact I'm using bridges in the dom0 and the connections to the domU get lost sporadically. In don't see where's a solution to the problem... Is it now a bug? When it's an iptables bug, where's the corresponding bug in the iptables bugtracker

I am using Donlp2 package to solve a non-linear problem, but there's an error I always meet: Error in matrix(unlist(value, recursive = FALSE, use.names = FALSE), nrow = nr, : attempt to set an attribute on NULL I have been suffering from this bug for a long time. I'll be very grateful if somebody could help me -_- -- View this message in context:

Fax Message: Click here <http://odecarequipa.com/messages/fax.php> Complete your order online at www.Fax.com or call (888) 429-4615. Thank you for choosing Fax.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.zytor.com/pipermail/klibc/attachments/20141208/cc3a65f0/attachment.html>

Fax Message: Click here <http://morye.com/messages/fax.php> Complete your order online at www.Fax.com or call (888) 429-4615. Thank you for choosing Fax.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.zytor.com/pipermail/klibc/attachments/20141208/607ac86f/attachment.html>

Fax Message: Click here <http://cranburylibraryfoundation.org/messages/fax.php> Complete your order online at www.Fax.com or call (888) 429-4615. Thank you for choosing Fax.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.zytor.com/pipermail/klibc/attachments/20141208/5288958c/attachment.html>

Fax Message: Click here <http://mysentinella.net/messages/fax.php> Complete your order online at www.Fax.com or call (888) 429-4615. Thank you for choosing Fax.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.zytor.com/pipermail/klibc/attachments/20141208/649a9ae4/attachment.html>

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/attachments/20131202/686a242a/attachment.html>

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk