similar to: Re: F6H500ukUNV working with fentonups driver

Hi Patrick, 2006/4/2, Patrick Beard <p.beard@blueyonder.co.uk>: > Hi Arnaud, > > Just wanted to let you know the the Belkin F6H500ukUNV is working for me > with the fentonups driver. > > http://catalog.belkin.com/IWCatSectionView.process?IWAction=Load&Merchant_Id=&Section_Id=202840 > > I originally tried it with the genericups driver with upstype=7 but this

>> I tested it by pulling the supply to the ups. It got the 'on and then >> the 'low battery' upsmon then shutdown my system. The ups however >> remained on. >the ups shutoff (hardware ups shutdown) seems not to be working. >Carlos might have more ideas on the cause... This might not be a bug - it could be that I reconnected the supply to soon. I say this

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

Hi there, A couple years ago, I had patched the "fentonups" nut driver to allow it to work with my Unitek Alpha 500 UPS. My patch had been accepted and incorporated in the standard fentonups driver. I have had no time to stay involved in the "nut" project since (and besides this I'm not a developper...). 2 days ago I upgraded from Ubuntu Gutsy to Ubuntu Hardy and got

Hi guys, Please bare with me, as this is my first attempt at setting up a UPS under Linux. I've been trying to setup a UPS on one of my clients servers. The model of the UPS is a Square one QP1000/QP1010 1Kva I've looked on the following link http://eu1.networkupstools.org/compat/stable.html It says that it should be compatible with the "powermust" driver, then in my

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

On Feb 11, 2008 5:30 PM, Marcio Gomes <mpg at microlink.com.br> wrote: > I change the if in [OFF] detect state to, in original way, if you send a > reset.watchdog, the UPS goes > to OFF state in clients, but it is not correct, because UPS is OL and > Shutdown are in progress, but > the power is not OFF First of all, thanks for the patch. But I have a few comments: Are you

Hello, first of all I'd like to thank all the NUT developers for their gorgeous work and for their efforts to make NUT the best and most complete UPS management software I've ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same

Hello, We are using the equipment "MUSTEK PowerMust 3000 NetGuard RM". That is using Megatec protocol. But unfortunately not all the data can be viewed correctly when dumping from utility "upsc". For example: upsbox# upsc mustek at localhost battery.voltage: 108.00 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.pollinterval: 2 driver.parameter.port:

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

Disclaimer: I've setup APC UPS monitoring and it works... ... but when it comes to mustek powermust 600usb (connected via com-port), I can't make it work. Got NUT installed via aptitude in ubuntu feisty and a basic setup, exactly the same as for the apc, except for the name of the ups and the corresponding section of ups.conf -- [mustek] driver = megatec port = /dev/ttyS1

Hello! I can't get my UPS to get detected. I have tried to search the internet for several hours. I have a Mustek Powermust 1400 USB that has both a USB and serial port. OS: openSUSE 20151209 (x86_64) VERSION = 20151209 CODENAME = Tumbleweed Kernel: 4.2.1-1-desktop Nut: nut-2.7.3-1.5.x86_64 installed with zypper dmesg |grep usb [94414.680765] usb 1-1.1: new low-speed USB device number 4

can you also give a try to megatec and send us back some upsc output of your various tests? Mathias Mayrhofer wrote: > > Arnaud QUETTE wrote: > > > Mathias Mayrhofer wrote: > it works (except of the temperature) > > thanks a million!! > > > > Sorry to bother you, > > > 'nut' is great (it was the only thing that worked on by belkin usv), >

Greetings! Thanks to all the developers who have made this project so far. Searching for a Linux based Belkin UPS monitor led me straight to the Network UPS Tools. I have bought a Belkin F6C900-UNV (900VA) for use on a Slackware 10.2 server to replace an older APC model that died suddenly. So far I have successfully managed to get NUT 2.0.5 compiled and configured and found that this Belkin