similar to: Tripplite SU2200XL

The 2.0.2+ tripplitesu drivers do not recognize SmartOnLine SU2200XL and possibly other SmartOnLine UPSes. Here is a one-line fix. Lee --- ../nut-2.0.2/drivers/tripplitesu.c Thu Jan 27 08:33:21 2005 +++ drivers/tripplitesu.c Sat Oct 1 13:38:51 2005 @@ -227,7 +227,7 @@ buffer[4] = '\0'; if (!strcmp(buffer, "~00D")) { - if (ser_get_buf_len(upsfd, buffer, 4, 3, 0) <=

I'm having trouble with a TrippLite SU3000XLCD. I'm using a Raspberry Pi running Raspbian (wheezy) with NUT 2.6.4. I can monitor my older TrippLite UPSs, mostly SU1000RT2Us, with this Pi and a USB to serial adapter. My first thought with the SU3000XLCD was to use the USB port instead of the serial port as that's the "modern" thing to do. When I plugged the USB cable in

Good afternoon all, I have a Tripp-Lite SmartOnline SU1500RTXL2ua UPS that I had previously tried to get up and running with NUT earlier this year. Peter Selinger had been working with this, but he had to devote time to more important things, and I did too, so it got pushed to the back burner. I saw in the release announcement of 2.2 that the UPS is now supported and decided I would try once

On May 24, 2015 4:46:18 PM PDT, Jonathan Billings <billings at negate.org> wrote: >> On May 24, 2015, at 18:24, Kirk Bocek <t004 at kbocek.com> wrote: >> >> So: >> >> $rpm -e --nodeps chrony > >No. Bad. > Okay, okay! I'll go on the paper. I'll reinstall chrony. But there *are* places I've needed to use nodeps. Mostly to manage

On 5/25/2015 4:40 AM, Jonathan Billings wrote: >> On May 25, 2015, at 01:10, Kirk Bocek <t004 at kbocek.com> wrote: >> >> I'll reinstall chrony. But there *are* places I've needed to use nodeps. Mostly to manage inter-repo package incompatibilities. > You should look into the yum priorities option to ensure packages from different repos don't step on each

Hi Al, I'm currently not much available, so I've fwded your mail to the nut list... You might get more reactivity this way... 2007/11/20, Al Grimstad <al at grimstad.mv.com>: > Hi. I don't have the energy or time to subscribe to one of the nut > mailing lists, but this brief FYI may be useful. > > I believe there has been a regression with respect to nut and the

So I've built my first CentOS 7 host and am learning all the new ways of doing things. I setup and enabled ntpd but after a reboot I get: $ systemctl status ntpd ntpd.service - Network Time Service Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled) Active: inactive (dead) After issuing: $ systemctl start ntpd Ntpd runs just fine. But why isn't it loading at boot

Good afternoon, I am trying to communicate with a new Tripp-Lite UPS via usb and having little luck. After more than a week on this I've decided to ask for help. I am very inexperienced at posting information to message boards, so hopefully I'm doing this right. I assume this is the correct place to post this message. I will start with the equipment I have. I am using Debian Sarge

On 5/24/2015 12:22 PM, Gordon Messmer wrote: > On 05/24/2015 11:41 AM, Kirk Bocek wrote: >> to activate your selected daemon. I just used the new systemd commands, >> thinking that would be enough. So I tried that and rebooted. Nope, same >> problem: > > chronyd and ntpd both use UDP port 123, so each will terminate the > other when it starts. If both are enabled,

Hi, I've been using TrippLite's PowerAlert software with my RM2200XL2U rack system and my APC BackUPS desktop systems. Unfortunately it doesn't work with openSUSE 10.2 (the software has problems with the serial port and UPS interfaces on openSUSE 10.2), so I've been looking at other options. I see that openSUSE 10.2 includes NUT, and it appears to work with my TrippLite UPS via

Hello Nut Devs, I'm working with usbhid-ups and a Tripplite OMNI1000LCD. I used a USB packet sniffer to discover something cool about the watchdog feature in this unit. (not sure if the other OMNI-X-LCD models work the same or not.) Basically there's a single HID variable at Report ID 0x52 (UPS.OutletSystem.Outlet.ffff0092) that's one byte (0-255 int) and it contains the Watchdog

I've been planning to build a dual Opteron server for awhile. I'd like to get people's suggestions on a suitable motherboard. I've looked at the Tyan K8SE (S2892) and K8SRE (S2891) but would like to find more Linux-specific experiences with these boards. Some features I expect are at least 4 SATA (SATA-300?) ports, serial console support in the BIOS, USB 2.0 and IEEE-1394

I am using NUT 2.0.2 on SuSE Linux 9.2 which is attached to a Tripplite SmartPro Net 2200 UPS. I have Nut using the included tripplite driver, and it is communicating with the UPS correctly. The battery voltage of theTripplite reported by the NUT server is 13.5VDC. If I attach the UPS to a Windows 2000 server running Tripplite's PowerAlert software, the battery voltage is being reported as

[please use reply-all to include the list] On May 20, 2019, at 5:30 PM, Steven Bixby wrote: > > I have a TrippLite AVR550U that my company uses several individual Linux boxes in one large system, all running Ubuntu 18.04LTS, and all will be using the package version of nut - 2.7.4. In my scenario, our usage case is for the PCs to all shut down, followed by the individual UPSes, when

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

Hello list! I can't seem to get this running via RS232 monitoring; I've been told that NUT won't support serial connections, and find this hard to verify. Does anyone else have this running on the SU10KRT3U via RS232? If so, what driver did you use? I'm getting no satisfaction from the "tripplite" driver; upon upsdrvctl start, I get "Failed to find UPS - giving

Hi Matt, first, note that Russell (Kroll) is retired for long. Support request should go to the NUT Users list, which needs subscription. 2010/6/23 matt <matt at mattevans.org> > Experts, > > I have gotten nut to work this evening, with usbhid-ups, and a small > addition to udev, on my new TrippLite SmartOnline model. I am on Ubuntu > 10.04. This is the 2U rackmount 800W

I'm unable to install x86_64 on a host. The installer gets through the first part, asking for install type and it begins loading the images from whatever media was selected. Then anaconda spills a series of cryptic messages ending in 'file not found' and the console on F2 is locked up. I've tried this with physical DVD media, PXE-HTTP and media-boot HTTP install. It happens

Hi, I'm running the latest stable nut (2.4.3). It doesn't appear to provide support for the Tripp Lite SmartOnline SU1000XLA. [sups] driver = usbhid-ups port = auto vendorid = 09ae productid = 4004 4337# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using subdriver:

I am trying to get a TrippLite SU1500RTXL2Ua working with nut on Mandriva 2007.1, is there a particular version of nut needed to get this to work? At first I tried nut 2.0.5 (which came with 2007.1) but it wouldn't work, and then research showed it was an older version of nut. So nut-2.2.1-2 src rpm was pulled from Mandriva 2008.1, the binary rpm built, and nut and nut-server installed from