similar to: Shutdown after 5 minutes?

Hi, I'm trying to get a sweex ups working with nut on debian sarge. This one: http://www.sweex.com/producten.php?lang=1&%20sectie=&item=59&artikel=95 It's shipped with UPSmart and according to the compatibility list it should work with the genericups upstype=7 driver. But it doesn't. I get: mybox:/etc/nut# /etc/init.d/nut start Starting Network UPS Tools: (upsdrvctl

Hello, When my kernel oopses (not ups/nut related) nut is somewhat upset and keeps complaining that power is gone, and restored, etc, etc, etc. How can I fix this? Kind regards, Udo

Hello, I'm just migrating my boxes to fedora 9 which brings us to the upstart mechanism instead of SystemV, etc.The distro as it is delivered does not have configuration which supports powerfail events. What can I put in /etc/events.d to make nut work again with the rest of the system fortimely shutdown, etc? Pointers to example files are very welcome! Thanks. Kind regards, Udo

Hi there First a big thank you to all nut developers. I tried the 2.0.4 as well as the 2.0.5-pre1 versions with my CyberPower OP1000E connected to a serial to USB converter. All I got was the following: # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5-pre1 Network UPS Tools - CyberPower text protocol UPS driver .05 (2.0.5-pre1) Warning: This is an

I recently purchased a CyberPower CP1200AVR UPS and am trying to get NUT 2.0.3 or NUT 2.1.0 to work with the newhidups driver, but am having little success. Before I purchased I did some googling and saw people talking about problems so I'm guessing it may not be supported yet? I did find some posts about people getting it to (sort of) work with some hacks, but couldn't tell if they

Hello All I have a MicroDowell ups (BBox BP 1000) connected to a Gentoo box by serial cable. If I try to start the driver , I see the following : Network UPS Tools - CyberPower text protocol UPS driver .05 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. debug level is '13' ups_sync: send [\rP4\r] ups_sync: got ret 46 [#1000VA

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

Hi Recently i bought a MicroDoWell BP50, and with it followed a USB 2 serial converter. When i plug it into my 2.6.19 kernel, dmesg shows hiddev96: USB HID v1.10 Device [Cyber Power System CPS RS232 USB BRIDGE for UPS] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver So, i figured i should use usbhid-ups,

Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine. I've followed all the basic guides on setting up NUT and UPS' but have had no luck. My current ups.conf is: [cyberpower-gentoo] driver = cyberpower port = /dev/ttyS0 desc = Workstation Upon running /etc/init.d/upsd start or upsdrv start I get: * Starting

Hi, I wanted to report some success with monitoring this UPS, a "Geek Squad" brand GS-700U that I purchased earlier this year from Best Buy Canada. Information about this... thing is very scarce so here is what I know: The unit itself is probably made by Cyberpower. It has a 9-pin serial port on the UPS, as well as a serial-USB adapter thing. I cracked open the serial-USB

I've just noticed that cpsups isn't listed anymore in driver.list. Any reason not have removed it from the source too? Still on the way to 2.4; any update on your confidence level to remove nitram and cyberpower too? -- Arnaud

Arjen, I read the following in the upgrade notes and just wanted to see what the status was for the cyberpower driver? The note reads: - The cpsups and nitram drivers have been replaced by the powerpanel driver, and removed from the tree. The cyberpower driver may suffer the same in the future. What does this mean to me -- a cyberpower user? -- David C. Rankin, J.D.,P.E. Rankin Law

Hello, I downloaded tinc 1.0.9 from the site and tried to build on Fedora 10 on i386 (and also x86_64). I get, during the configure phase: checking for zlib.h... yes checking for compress2 in -lz... yes checking for lzo1x_1_compress in -llzo2... no checking for lzo1x_1_compress in -llzo... no configure: error: "lzo libraries not found." but: # rpm -qi lzo Name : lzo

Hi, I've installed Nut 2.0.5 on a RedHat 9 box. I have a GeekSquad 1500 UPS. (GeekSquad is a BestBuy brand) I've found out that it's actually a CyberPower 1500 AVR LCD. I'm using it with the serial cable. I'm unable to get it working with any of the drivers provided with NUT. I've tried cpsups, cyberpower and powerpanel. here's the output of the different drivers

Hello, I'm a new to NUT and I'm having some setup problems. Here's my setup: Nut 2.0.2 Gentoo Linux 2.6.13-r3 CyberPower AVR900 According to the hardware compatibility guide this setup should work. Here's what I get: root@gentoo (0) [552] % upsdrvctl start Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools - CyberPower driver 1.00 (2.0.2)

> Author: nba-guest > Date: Mon Apr 24 20:45:39 2006 > New Revision: 414 > > Modified: > trunk/CHANGES > trunk/drivers/cpsups.c > Log: > Fix C++ style declarations between statements > > Modified: trunk/CHANGES Niels, What is the reason for 'fixing' this? Constructions like these are used in many locations throughout the sources (not only in the

Hey All: I have a CyberPower OP1250 and I'm trying to mod the cpsups driver to work with it. I added the following lines to cpsups.c /* Added: Andrew Tubbiolo EXPERIMENTAL Aug 15, 2008 */ if(!strcmp(abbr, "#1250VA ")) { dstate_setinfo("ups.mfr", "%s", "CyberPower"); dstate_setinfo("ups.model",

Hello all, Some time ago, you all were very helpful in getting nut running on an OpenBSD system, using--for what it's worth--a CyberPower 1500AVR. So I finally got my FreeBSD system's UPS, also a CyberPower 1500AVR, within reach of its serial cable and I'm trying to get nut running here. I'm going nuts. Basically, I copied the OpenBSD configuration over to the FreeBSD system

I''m running Xen on a dual xeon system at the moment and somehow the results are a bit less than what i expected. I’ve started to do some monitoring on it to see how bad it is. you can see for yourself on: http://core.zokahn.com/cs-01/ I''ve installed Xen 2.0 using the howto in howtoforge: http://www.howtoforge.com/perfect_xen_setup_debian_ubuntu This virtual machine is running 2