similar to: Update (was: FreeBSD 6.1, MGE Ellipse ASR600USBS,)

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

2006/10/2, Peter Selinger <selinger@mathstat.dal.ca>: > Arnaud Quette wrote: > > > > 2006/9/29, Peter Selinger <selinger@mathstat.dal.ca>: > > > > > I don't really understand the purpose of the "Testing" branch. It has > > > not been touched since July, as far as I can see. I also don't > > > understand NUT's release

I have an Ellipse USBS connected via serial cable to a CentOS 3 box. Do I need to turn off the UPS as the final stage of shutdown, or will the UPS power itself off, before the battery reaches a level to low to safely recharge from? I notice there is the option for the UPS to turn itself off (and on again) unattended if power is restored during shutdown, but there doesn't seem to be an option

Greetings Arnaud and others, I've been using NUT with Gentoo Linux for a couple of years now. I recently installed SUSE Linux 10.0 and I'm having difficulty getting it to recognize my UPS (MGE Ellipse). I tried the MGE-PSP package, but the GUI crashes immediately on startup. I decided to get just NUT running correctly before worrying about that. I uninstalled MGE-PSP and am left wtih

[fwded to the list] Hi Fran?ois, > I didn't post this on the list as it seems a little bit more MGE > stuff than nut. Anyway feel free to post it if you consider it's > relevant. > > This is the trace you were asking for. The Ellipse 800 correctly shut > down in this test : > > This was running on a i386 recent hardware, the cpu load is under 5%, > 360MB out of

ok, I'll try to sum up the thread and answers to the various point: 2005/10/24, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > ... > > Any perl (or other well supported scripting) monger out there to take > over > > that one? > > Great idea. How about bash/sh? Still the most universally available > scripting language. I am

[moving to upsdev as it's now off topic for upsusers] 2006/8/30, Peter Selinger <selinger@mathstat.dal.ca>: [snip] > > the threaded method would allow, with some sub-drv config, to launch > > the polling thread and/or the interrupt thread. Either feeding the > > core is not important since the core wouldn't care about that. > > I think is may make sense to

I'm now doubting if I've made this statement or not, so here it is: newmge-shut is *not* ready for production usage! I've lately found some bugs during the MGE PSP 3.0.4/3.0.5/3.0.6 updates. So for the moment, prefer to keep using mge-shut. 2007/10/25, R?zsa G?bor <mailer.tovis at freemail.hu>: > newmge-shut ??? > Shutdown, switch of ups does not work. Using command >

Arnaud, you changed the "if" part, perhaps you'd like to change the "else" part, too? Changing the output format of HIDDumpTree() has the potential to break the functionality of scripts/subdriver/path-to-subdriver.sh; I don't think it does in this instance, but I have not checked it. Perhaps it would be good to add a comment in the source code as a caution. -- Peter

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

I'm happy to have had a quick look at this thread... 2007/5/17, Peter Selinger <selinger at mathstat.dal.ca>: > ... > as you know, I haven't had much time to work on NUT. Now my wife is > expecting our first baby in 1 week, so I don't think I will get back > to it in the foreseeable future. I didn't knew before! what a good news: all my congratulations to you

Philipp Leusmann wrote: > > Ok, I tried this and my results seem to bet he same as reported. Then I > think I=B4ll have to stick with the windows-driver at least on my main > machine.=20 > Or is there anything I can help to fix this driver? I don't know why we can't read anything from this device. There are many ways in which one could make a buggy device that works with

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left.

2006/1/27, Peter Selinger <selinger@mathstat.dal.ca>: > > ... > battery.mfr.date, which is probably the more accurate interpretation. > > I think the naming should be changed to propose both: - battery.date.mfr: Battery manufacturing date - battery.date.change: Battery change date Any comments? Arnaud -------------- next part -------------- An HTML attachment was scrubbed...

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

Hello, I have Ellipse ASR 1500 UPS and now I'm trying to monutor it with NUT from FreeBSD. It seems that there are some problems with this UPS: =================================== ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 > usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2

I have an MGE Ellipse Premium 1200 that I connected to my server using its USB cable. Nut seems to be working fine. I've done a power down test and it worked and came back up when the UPS had power again. I'm using the newhidups driver and the USB cable. The problem I'm having is that if I boot with the cable connected newhidups says it can't find the UPS. If I unplug and plug in

My new MGE Ellipse Premium 1200 is now working fine. I've tested pulling the plug and the computer shuts down properly and comes back up when I replug. The only strange behaviour is that when I put the power back on the battery shows as being at 86%. If it was at 86% it should have lasted longer. Is there any calibration step I can do? The only commands the ups seems to support are: $ upscmd

Hello everybody, Our supoprt team is facing a problem which froze the CPU. They suspect that this happens after an automatic battery test, which lets the battery goes down to 30% and then stop the test. At this level of charge, our kernel also triggers a shutdown (CPU and UPS). I saw (in the doc found here : tools.*mge*ops.net/download/intl/products/*ellipse*-asr/28-umeasr_08.pdf) that this

Hello, I have an MGE Ellipse 500 UPS for about 8 years, connected to a local OpenBSD server through usb, running nut-2.2.1. I used to occasionally drain the UPS battery to see if the local server was shutting down cleanly my desktop PC and it was working OK. Suddenly, there was a power failure last week, the UPS was serving the two PCs (the server and the client) for 30 secs and then it went