Displaying 20 results from an estimated 4000 matches similar to: "Calibrating the Battery on an MGE Ellipse Premium 1200"
2006 Nov 02
1
MGE Ellipse Premium 1200 USB cable only works if plugged after boot
I have an MGE Ellipse Premium 1200 that I connected to my server using
its USB cable. Nut seems to be working fine. I've done a power down
test and it worked and came back up when the UPS had power again. I'm
using the newhidups driver and the USB cable.
The problem I'm having is that if I boot with the cable connected
newhidups says it can't find the UPS. If I unplug and plug in
2006 Mar 08
1
MGE ELISE PREMIUM 1200,NT 02 Serial Nr. 92HE04008
Hi people.
I'm trying to config a:
MGE ELISE PREMIUM 1200
NT 02 Serial Nr. 92HE04008
With its serial cable into /dev/ttyS0.
I had configured ups.conf, with no luck.
Here is my ups.conf:
[upscura]
driver = mge-shut
port = /dev/ttyS0
desc = "UPS"
The permissions into /dev/ttyS?:
crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0
crw------- 1 nut nut 4, 65 mar 8 18:42
2015 Oct 28
0
Random but persistent USB disconnect/reconnect with MGE Pulsar Ellipse Premium
Hi,
My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port,
usbhid-ups driver.
Using simply KNotify about UPS connection states I noticed that sometimes
unpredictably a notification appears that the USB connection to the UPS is
lost and a few seconds later another notification appears that the
connection is restored. And this repeats to infinity. The only way to get
out of it is to
2012 Jun 26
1
NUT MGE Pulsar Ellipse Premium 800: Changed NUT rw variables?
Hello all,
I've got an MGE Pulsar Ellipse Premium 800 powering a couple of FreeBSD
systems. Driver used is mge-shut, I don't know what the new mge-shut
driver offers, but I follow the "if it works, don't fix it" dogma here. :)
I also had a nut server installed on the master, with the
/usr/local/etc/rc.d/nut script slightly modified to include a couple of
upsrw commands
2006 Nov 16
6
FreeBSD 6.1, MGE Ellipse ASR600USBS, newhidups & upsd
Hello,
I'm facing problems as I'm installing NUT to monitor a MGE Ellipse
ASR600USBS on a FreeBSD 6.1 box.
UPS is recognized as :
ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2
I'm temporarily using root profile (devfs/devd scripts not modified atm).
newhidups starts & runs fine (unplugging mains makes newhidups outputs
lots of data when started with -DDDD flags)
2006 Feb 09
1
Fwd: Re: Problems suse 9.3, ellipse premium 500
Hi,
I have used /etc/init.d/rclevel.d/S12ups script renaming it with S22ups and
adding at the top:
chown root:nobody /proc/bus/usb/002/002
chmod 660 /proc/bus/usb/002/002
It's a patch but works.
Best regards.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20060209/aa742904/unnamed.htm
2010 Oct 07
1
[Eaton ex-MGE Ellipse ASR] Disable automatic battery test
Hello everybody,
Our supoprt team is facing a problem which froze the CPU.
They suspect that this happens after an automatic battery test, which
lets the battery goes down to 30% and then stop the test.
At this level of charge, our kernel also triggers a shutdown (CPU and UPS).
I saw (in the doc found here :
tools.*mge*ops.net/download/intl/products/*ellipse*-asr/28-umeasr_08.pdf)
that this
2006 Feb 03
2
Problems suse 9.3, ellipse premium 500
Hi,
I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2
and versions:
nut-2.0.2-4
mgeups-psp-3.0.0-3
the first time that I launch psp it seems to contact
the UPS and you can make changes to the parameters
and all seems ok. If you make a reboot the psp hangs
up and if you try /etc/init.d/ups it fails:
Starting service NUT:
-> Starting UPS driver:
Network UPS Tools -
2007 Oct 12
2
MGE Ellipse USB cable config ?
Hi everyone,
This is not directly NUT related, but i don't know where else I can
still ask this.
I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA
for a while now at home. http://www.mgeups.com/download/doc_intl/
small/premium/389uk.pdf
It's been working very well for me on linux, but my linux server has
recently passed away and now I only have Macs left.
2006 Jun 09
1
MGE ellipse 1200 config and documentation
Hi,
I have recently purchased MGE ellipse 1200 UPS for my home system. Obviously,
the choice of this particular brand was mainly dictated by MGE's
long-standing support for Linux and NUT project. The fact that the box was
clearly the prettiest looking one on the block did help also ;-). I have had
NUT tools installed and configured in no time, as I did it numerous times
before -- kudos
2008 Apr 01
1
Incorrect battery status on MGE Pulsar M 3000
Hello!
We have two upses: MGE Pulsar M 3000 and MGE Pulsar EXtreme 3200C. They
connect to server by USB. EXtreme works good with usbhid-ups (nut 2.2.1) and
newhidups (nut 2.0.5). But Pulsar M doesn't want to work with usbhid-ups.
- my ups.conf:
[extreme]
driver = usbhid-ups
port = auto
product = "EXtreme"
[pulsar]
driver = usbhid-ups
port =
2007 May 16
1
NUT and MGE Ellipse ASR 1500 under FreeBSD.
Hello,
I have Ellipse ASR 1500 UPS and now I'm trying to monutor it with
NUT from FreeBSD. It seems that there are some problems with this UPS:
===================================
ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2
> usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NEC(0x0000), rev 1.00
port 1 powered
port 2
2005 Aug 24
0
Re: followup : MGE Ellipse 800 USBS doesn't shutdown under FreeBSD
[fwded to the list]
Hi Fran?ois,
> I didn't post this on the list as it seems a little bit more MGE
> stuff than nut. Anyway feel free to post it if you consider it's
> relevant.
>
> This is the trace you were asking for. The Ellipse 800 correctly shut
> down in this test :
>
> This was running on a i386 recent hardware, the cpu load is under 5%,
> 360MB out of
2010 Jan 03
1
MGE Ellipse 500 USB power failure problem
Hello,
I have an MGE Ellipse 500 UPS for about 8 years, connected to a local
OpenBSD server through usb, running nut-2.2.1. I used to occasionally drain
the UPS battery to see if the local server was shutting down cleanly my desktop PC
and it was working OK.
Suddenly, there was a power failure last week, the UPS was serving the two
PCs (the server and the client) for 30 secs and then it went
2007 Oct 23
1
MGE Pulsar Ellipse 800 offearly or box shutdown late
I'm struggling to configuring nut for MGE Pulsar Ellipse 800 (at least
Ellipse 800) for two boxes - home firewall and file server. I'm using
Debian 4.0 Etch, every one of them.
I'm built (after some dangerouse experiments) a testing configuration,
where boxes are plugged to line, server playing as a master, firewall as a
slave, and UPS connected to an electric heater about 300 Wats (no
2006 Nov 21
0
Update (was: FreeBSD 6.1, MGE Ellipse ASR600USBS,)
Fellows,
back for 4 days, the baby and the mother are now at home, and the
father is... hem, well not so fresh ;-)
For those interested in some pictures: http://benjamin.quette.free.fr/
2006/11/16, Peter Selinger <selinger@mathstat.dal.ca>:
> ...
> Arnaud: could you please amend the instructions on the NUT download
> website http://www.networkupstools.org/source.html (Development
2005 Aug 26
0
add'on : MGE Ellipse 800 USBS & FreeBSD
Hi again,
As a followup to my previous post, just a couple words to add a
comment on the numerous tests I did the past days.
It was necessary to increase the waiting time in the /etc/
rc.shutdown, to wipe out the remaining problems (ups didn't shut down).
# a rather large sleep to insure the ups stop babbling
sleep 20
It appears the ups needs more than 20 seconds to
2007 Oct 25
0
newmge-shut warning (was: MGE Ellipse 800 shutdown problems)
I'm now doubting if I've made this statement or not, so here it is:
newmge-shut is *not* ready for production usage!
I've lately found some bugs during the MGE PSP 3.0.4/3.0.5/3.0.6 updates.
So for the moment, prefer to keep using mge-shut.
2007/10/25, R?zsa G?bor <mailer.tovis at freemail.hu>:
> newmge-shut ???
> Shutdown, switch of ups does not work. Using command
>
2005 Aug 18
1
problem with an MGE Ellipse 650 (Debian Sarge)
I've recently bought an MGE 650 that has both cables : USB and Serial.
Since it's used on a server, I'd prefer not to load usb drivers just for
nut. The problem is, either with newhidups or with mge-shut, the driver
instantanly report that the communication with my MGE is lost, and
shotly after that my ups is unavailable.
It never show up again, and nut constantly says that the
2007 Oct 17
2
usbhid-ups on openSUSE 10.3 does not see MGE Ellipse 1500
Dear List, The driver usbhid-ups does not detect my MGE Ellipse 1500.
I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2,
nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!)
lsusb shows:
Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS
/etc/ups/ups.conf says:
[myups]
driver = usbhid-ups
port = auto
desc = "Local UPS"