similar to: Unitek iZi UPS 525

Hi everyone, I've been using nut 2.0.3 for more than a year on a Unitek iZi UPS 525 (which is a rebadged Mustek). Everything worked fine and last week, when pressed by RENEL :-) I ran a battery test which showed the system to have 17min of back-up power (yes, still haven't figured out how to use upssched...) The system used for testing was an old PIII/500MHz/512KB cache, 256MB RAM (3 x

Hi again, I tested several times using the Megatec driver from nut 2.2.2 to no avail, as it definitely never "sees" the UPS. Always getting : # drivers/megatec -DDD -a Alpha Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec] Carlos Rodrigues (c) 2003-2008 debug level is '3' Starting UPS detection process... Asking for UPS status [Q1]... Q1 => FAILED

Hello everyone, has anyone ever tried to make this device work with Linux and NUT? This is what udevadm monitor says: UEVENT[1215983089.652345] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1 (usb) UEVENT[1215983089.652427] add /class/usb_endpoint/usbdev1.4_ep00 (usb_endpoint) UEVENT[1215983089.657975] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1/1-1:1.0 (usb) UDEV

Hello, I have one UPS Infosec XP Pro 2500 RM and it works with windows sw RUPS2000. Now I want to install this UPS as virtual server on vmware ESXi vMA - (SUSE SLES 11SP2 linux). On this linux I have NUT 2.6.0 and I stopped now with configuration of genericups driver. Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows: PIN | PC | UPS

All, I just bought a Belkin F6C1100-UNV and am trying to get it to work with NUT. I have tried many drivers ( "belkin", "belkinunv", "genericups upstype=4", and "genericups upstype=7", "bestups", "fentonups"). None of them seem to work. Does anyone have any experience with this device? If there is some utility that you all use to

I've just acquired a Unitek ALPHA 1200 Sx UPS to replace an older serial UPS that's been working well with NUT for years. Could anyone with a Unitek tell me what the pinout on the 10P10C plug is so I can make up a cable? Thanks.

Hello to all list members, I'm trying to make my UPS work with nut-2.2.2 (using Debian Testing, but compiled from source code) for a week ago, with not success. It's a Unitek Alpha 1000Ps, and I supossed it would work with megatec_usb driver, as other Unitek models. It has an USB interface, and when I plug it into my system I've got this message: chopito:/home/jordi# dmesg | tail

Hi Alexander, > I've UPS named PowerMan RealSmart 1000, it is not listed in > compatibility list. I found that it works with "fentonups" driver and > have ups.model "Unknown S163-1000". Ithink "1000" is from capacity - > I've seen in Internet someone have RealSmart 800 identified "S163-800". > Also PowerMan have

Hello nut-upsuser, Hope, that its might be useful for someone: 1. Kebo UPS-600A Driver: genericups UPStype: 7 Config extras: SD = -RTS or SD = -TX (don't know why but both are suitable) 2. Kebo UPS-1200M Driver: fentonups Config extras: none Note: Looks like twin brother of Microlab UPS-1200M :) Driver ask me to report ID string: "Unknown

Hi Patrick, 2006/4/2, Patrick Beard <p.beard@blueyonder.co.uk>: > Hi Arnaud, > > Just wanted to let you know the the Belkin F6H500ukUNV is working for me > with the fentonups driver. > > http://catalog.belkin.com/IWCatSectionView.process?IWAction=Load&Merchant_Id=&Section_Id=202840 > > I originally tried it with the genericups driver with upstype=7 but this

Hello I've got an Unitek UPS (650ipE) that use megatec driver ... I'm running Ubuntu 7.04 with a 2.6.20 kernel and nut 2.0.5-1 package Ubuntu by default use Udev and "hid", "usbhid", "evdev" kernel modules are loaded automatically The UPS is detected on system level but "upsdrvctl" can't access to the device ... Does anyone could give

Hi, I've got an AEC Star T4110 connected with an RS232 port by a megatec cable. On the list of supported devices (http://www.networkupstools.org/stable-hcl.html) there is only one AEC device, so I tried genericups with upstype=21. The problem is, that the UPS (while being on-line) reports constantly being on battery. # upsc aec ups.status OB My question is: What is the recommended procedure

Hi Mario, Mario Cassani wrote: > Hallo Arnaud, > some months ago I bought an SBS GC400 UPS. > I came with a kit RS232 + UPSmart CDROM that works only with RedHat 7.0-7.3. > As I use Debian I tried alien with no success. > > Can you please provide me with any hint to understand if my UPS can be managed by NUT? > Can a driver be written, knowing how the cable

Hello list, I'm fresh in using an ups for shutting down a linux server and i was thinking someone could give a hand at debugging a problem i stumbled to. I'm used to the redhat type of distribution, mainly centos 4/5, and off-course i installed nut and nut-client from the available rpm packages. After some reading i disconnected the server from the power supplied by the ups and

Hello list, I'm fresh in using an ups for shutting down a linux server and i was thinking someone could give a hand at debugging a problem i stumbled to. I'm used to the redhat type of distribution, mainly centos 4/5, and off-course i installed nut and nut-client from the available rpm packages. After some reading i disconnected the server from the power supplied by the ups and

I had some free time this weekend, and made some long overdue changes to "megatec". The thing is, these changes lead to a couple of questions that I must ask before I go on and "svn commit" them: 1) The blazer, fentonups, esupssmart, ippon, sms and mustek drivers are now completely covered and all of their functionality should now be present in megatec, and also every model

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't

Do you know some piece of code I could look at to see learn more about this ?

Do you know some piece of code I could look at to see learn more about this ?

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the