similar to: Additional server eralier shutdown condition

Hi everybody, i'm trying to use the UPSNAME environment variable within the script launched by upssched, and although it is correctly written and thus read by my script, it doesn't get updated when multiple UPSes are configured. To be more precise i'm monitoring 2 UPSes and using AT *EVENT* * *OPERATION* *handle *to manage events in upssched.conf. Am i wrong somewhere? I'm

Hello, Being new to this list and to Nut, maybe my question has been asked before but I didn't find a clear answer. My question is : is it possible to make nut aware of the percentage (or duration) of time before the UPS exhausts its power ? Thus making Nut conditionning the shutdown of the servers depending on the remaining load. I saw this thread on the mailing list :

On Jan 21, 2014, at 9:24 AM, Rafal Oleszek wrote: > I tried all options: > 1,2 > and in MINSUPPLIES: 1,2,3,4 > still didn't work. My mistake - I gave you the wrong advice before. For MINSUPPLIES, I'm used to either a 1:1 UPS-to-server ratio, or 2:1 where the server can run with either power supply unpowered. I just tried this in upsmon.conf: MONITOR dummy1 1 monuser

On Jun 8, 2019, at 4:16 PM, Roger Price wrote: > > Is your System Shutdown Plan to shut down using upsmon or using the script upsched-cmd? In upssched.conf you do not have a line > > AT LOWBATT ups at ... EXECUTE lowbatt > > and in upssched-cmd there is nothing to shut down the system. Joe, Roger has a good point - the SHUTDOWNCMD should work as long as the master system

Hello, I am a new user of NUT and trying to wrap my ahead around a couple of things. I installed NUT 2.7.4-13 from package on RasPi 4, running Raspbian Linux 11 (bullseye). I have Cyberpower SL700U connected to it. For testing I set battery.charge.low to 90, so I wouldn't have to wait a long time. See all relevant config below. First of all, what seems to happen is that UPS gets to the low

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC

Hi Arjen, I've just read the FAQ and got to the question: "Q: How can I make upsmon shut down my system after some fixed interval?" Well it looked like the question was there for me. :-) You say: Ask yourself this: why buy a nice big UPS with the matching battery and corresponding runtime and then shutdown early? If anything, I'd rather have a few more minutes running on

Hi, I didn't found an answer for my question in NUT documentation/FAQ or this mailing list archive so I?m posting it here. I want to start a timer only if both of my UPSes remain on battery. Not just one, both. My UPSes are: - ups1@host-a - ups2@host-b Is it possible to use something like this in upssched.conf? AT ONBATT ups1.* && ups2.* START-TIMER onbattwarn 180 Thanks,

> On Jan 21, 2014, at 9:24 AM, Rafal Oleszek wrote: > >> I tried all options: >> 1,2 >> and in MINSUPPLIES: 1,2,3,4 >> still didn't work. > > My mistake - I gave you the wrong advice before. For MINSUPPLIES, I'm used > to either a 1:1 UPS-to-server ratio, or 2:1 where the server can run with > either power supply unpowered. > > I just tried

On Jan 21, 2014, at 3:16 AM, Rafa? Oleszek wrote: > I would like to mention that MINSUPPLIES manipulation doesn't work. My nut version is : 2.2.2-4 (RHEL 5) What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines

Hi Roger, On 5/16/23 17:00, Roger Price wrote: > Hello Carsten, That's what I did but for a much simpler setup. I live in > an area with a lot of lightning, and my shutdown criteria is to be able > to shut down repeatedly during an electrical storm.? The NOTIFY and > CMDSCRIPT and the upssched-cmd logic are written up in detail in chapter > 7 of

I have a TrippLite AVR550U that my company uses several individual Linux boxes in one large system, all running Ubuntu 18.04LTS, and all will be using the package version of nut - 2.7.4. In my scenario, our usage case is for the PCs to all shut down, followed by the individual UPSes, when mains power is removed from the whole system. (This isn't a typical setup for UPS, but it's what

Dear List, I am a bit uncertain about some aspects of NUT and have not been able to find the desired info in the documentation. We have a server monitoring the network and it is also running the ups/nut-daemon. Together with some other important servers (all Linux) it is logical to make these monitor the UPS as 'master'. While other servers (mostly windows running winnut, some linux)

Hello, we have two UPSes - one Galaxy and one from Socomec, both monitored by the NUT server. The NUT server runs the version 2.7.2. We have roughly 3500 clients running upsmon, reading the status of both UPSes. They run mainly the version 2.6.4 and some 2.7.2. We observed the following on both client versions, regardless whether we run upsmon in the daemon or debug mode: Running upsc socomec

On Sun, 9 Jun 2019, Joe Gervasio wrote: > This question undermines my reading of the documentation.  I had thought that > these were separate things:  > >     SHUTDOWNCMD "/sbin/shutdown -u -h +1"  >     NOTIFYCMD /opt/local/sbin/upssched > > I had assumed that the SHUTDOWNCMD would be used by the Nut client (upsmon) to > shutdown the slave system,  and that

> > Did you see a line in the journal similar to this ? > Oct 06 22:49:54 pinta nut-delayed-ups-shutdown[1854]: > nut-delayed-ups-shudown.service calling > upsdrvctl to shut down UPS unit Never after I disabled the service. I pasted the whole journal section of the successful shutdown from last email. However I have been thinking about this line

hi: my testing server has two power supply and attach to two ups. one of the ups is connect to the server with usb. my upsmon.conf like below: # for two ups MONITOR ftups at localhost 1 monmaster nutmaster master MONITOR ftups at 10.1.1.2 1 monslave nutslave slave MINSUPPLIES 1 # for early shutdown NOTIFYFLAG ONBATT EXEC+WALL+SYSLOG NOTIFYFLAG ONLINE EXEC+WALL+SYSLOG NOTIFYCMD

http://bugs.freedesktop.org/show_bug.cgi?id=14496 Summary: Could you try to support flash movies on vbox7 Product: swfdec Version: unspecified Platform: All OS/Version: All Status: NEW Severity: enhancement Priority: low Component: library AssignedTo: swfdec at lists.freedesktop.org

Dear Arnaud, Now I started to write a driver that simulates continous power breaks. (E.g. in every 30 minutes.) This could be used for testing of setup of client upsmons. I have to simulate a behaviour of a real UPS. The physical model contains an extra attribute: the charging current that needed to compute recharge time and actual battery charge during the recharge process. Can we call this

Dear Arnaud, Now I started to write a driver that simulates continous power breaks. (E.g. in every 30 minutes.) This could be used for testing of setup of client upsmons. I have to simulate a behaviour of a real UPS. The physical model contains an extra attribute: the charging current that needed to compute recharge time and actual battery charge during the recharge process. Can we call this