similar to: Geek Squad UPS Systems

I Seem to have made some progress in getting nut-2.0.5 installed, but hidups still has a version number of 0.13. First is hidups 0.13 the correct version? if not how do I find the correct version. Second if my Geek Squad GS1285U UPS is not supported how do I proceed. I have been a programmer for 35 years(mostly high level computer aided design), written code in 20 some languages, am retired

This took a long time because I had problems with my system. After I reloaded my operating system several times I found I had a bad memory module. Here is the output from newhidups for my Geek Squad GS1285U. It just kept repeating until I hit ctl-z. I think that this means nut will work for this ups. My computer is not powered by the ups yet. I did not want it to be powered down by accident.

Nut will monitor the ups and shutdown Linux when the ups goes to low battery as it should. But the UPS is not shut down so the system will restart when the power is restored. If I switch the UPS off , restore power and switch the UPS on the system will restart. I have not been able to get nut to switch the UPS off after it brings the system down. I can get the UPS to switch off with upscmd

I downloaded nut-2.0.5 and followed the install instructions down to step 6. Since I will be using a USB port to connect to the Geek Squad GS 1285U did not go any farther yet. I tried to run "/lib/nut/hidups -DD -u root auto" to see if it found my UPS. But it is still the old hidups 0.13 from nut-2.0.3. Do I need to do something additional to get the new hidups?

Hi, I wanted to report some success with monitoring this UPS, a "Geek Squad" brand GS-700U that I purchased earlier this year from Best Buy Canada. Information about this... thing is very scarce so here is what I know: The unit itself is probably made by Cyberpower. It has a 9-pin serial port on the UPS, as well as a serial-USB adapter thing. I cracked open the serial-USB

Geek Receipt ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ** *~**GEEK-SQUAD~* Hi Geek-Squad User, We hope you're enjoying our services! We are glad to inform you that your annual plan with us has been successfully renewed. Your Geek Secure service plan

One of my UPS's died this weekend, and in the hunt for a replacement, I came across: http://www.bestbuy.com/site/olspage.jsp?skuId=6819552&type=product&productCategoryId=cat08029&id=1091101368673 Apparently there are "Geek Squad" brand UPS!? I'm assuming they are just re-branded. Does anyone know who the OEM is? Do they work with NUT? Thanks, Dave

Hi all, I am using llvm backend to generate binary for a specific accelerator. I would like to convert instructions into predicated form when instructions are still in SSA form. It looks like that ifconversion execution flow is different when instructions are in SSA form. However, I am encountering many problems (specially with registers) when I use it before register allocation. I was wondering

This is a message to my fellow network security professionals, www.asquad.com is formed by a group of security professionals with experience and knowledge. Even so, we would like your participation in the exchanging of ideas and your contribution of knowledge. We would appreciate your input about our web site and our Forum. We invite you to check out our site and register to become part of

I have been using the Asium P700 for about 4 months, running Debian Wheezy 7.9,? and would like to submit the UPS for inclusion in your list of supported devices.? ASIUM P700 (650VA/360W) | ? | | ? | | ? | ? | ? | ? | ? | | ASIUM P700 (650VA/360W)Prices only valid for purchases within the US. No PO Box deliveries. | | | | View on www.asiumpower.com | Preview by Yahoo | | | | ? | Not sure

This question is concerning ZFS. We have a Sun Fire V890 attached to a EMC disk array. Here''s are plan to incorporate ZFS: On our EMC storage array we will create 3 LUNS. Now how would ZFS be used for the best performance? What I''m trying to ask is if you have 3 LUNS and you want to create a ZFS storage pool, would it be better to have a storage pool per LUN or combine the 3

Hi everyone I would like to know if it's possible to prevent many loggings on many computers from only one user? I have user who opened 12 computers, logged on those 12 computers and ran boinc-client on those 12 computers... I want to prevent this kind of behaviour... Thanks in advance. Regards. -- Olivier Pavilla << ????????????????>> S.C.I.R.C. Orl?ans (Bourgogne) - I.U.F.M.

Greetings.? I have been using NUT for some time now and have not had any issues until yesterday.? I was trying to get my NOTIFYCMD script working and was making modifications to upsmon.conf .? After making the mod to upsmon.conf I invoked upsmon -c reload and a few minutes later the system shut down.? There was a loss of communications with the UPS.? I have an Asium P700 UPS and use the blazer_usb

On 03/23/2016 09:19 AM, Cole Robinson wrote: > On 03/23/2016 12:10 PM, Peter Steele wrote: >> Has anyone seen this issue? We're running containers under CentOS 7.2 and some >> of these containers are reporting incorrect memory allocation in >> /proc/meminfo. The output below comes from a system with 32G of memory and >> 84GB of swap. The values reported are

We have a Mirror setup in ZFS that''s 73GB (two internal disks on a sun fire v440). We currently are going to attach this system to an Equallogic Box, and will attach an ISCSCI LUN from the Equallogic box to the v440 of about 200gb. The Equallogic Box is configured as a Hardware Raid 50 (two hot spares for redundancy). My question is what''s the best approach to moving the ZFS

I am able to install fedora core onto an old p700 box with SCSI RAID 1 array, but while trying to install CEntOS I get an error about the installer not being able to find the disks. Moving on. --

Hi all, I have setup with linux samba-server(ver 2.2.1a) as my print-server under user security model with printer access allowed only for a few users. It's so happening that samba is allowing any users to fire print jobs on the shared printers,even those users who are not in the valid users list. However it is fine with normal shared folders ,where only the valid user are able to

Hi David, Thank you very much for your response. I also get correct results for my example (for a 64-bit target) if the upper bounds are changed to unsigned. The reason is simply because clang zero-extends `m` for address calculations but sign-extends it for the loop upper bound. This prevents SCEV from canceling out the 'm' term from the difference expression that looks like `(-3 +

Is there a better way to do this? It looks really ugly! http://pastie.org/1640550 -- You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this group, send email to rubyonrails-talk-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org To unsubscribe from this group, send email to

i am just curious how many * systems are in the real world with more than one user. do you run a certain version? you dont update CVS do you? any admins running a system of over twenty? over fifty? over one-hundred? i deal with 3com and nec systems all day (i am cerified in the 3com nbx advanced network telephony, elite voice mail, CCNA, A+, nec ipk, and soon to be "asterisk school of