similar to: Anaconda can't squeeze out the repomd.xml

Hello. A couple of years ago I installed two file-servers using kickstart. The server has two 1TB sata disks with two software raid1 partitions as follows: # cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb4[1] sda4[0] 933448704 blocks [2/2] [UU] md0 : active raid1 sdb1[1] sda2[2](F) 40957568 blocks [2/1] [_U] Now the drives are starting to be failing and next week

I have a couple lines like: part / --ondisk=sda --fstype ext3 --size=20000 --asprimary part swap --ondisk=sda --size=4000 --asprimary part /home --ondisk=sda --fstype ext3 --size=1 --asprimary --grow in my kickstart file. Is there a way to have 1 kickstart file that works for hda and sda both??? So I would like to have 1 kickstart file that works for either a hda

I am trying to add an efi partition to my working kickstart file. bootloader --driveorder=sda --append="rhgb quiet biosdevname=0 net.ifnames=0" clearpart --all --initlabel part / --ondisk=sda --fstype xfs --size=20000 --asprimary part swap --ondisk=sda --size=4000 --asprimary part /boot/efi --ondisk=sda --fstype efi --size=1000 --asprimary part /home --ondisk=sda

As I understand anaconda uses parted to partition (starting from centos 6), using this as example (kickstart configuration file): clearpart --all --drives=sda --initlabel part /boot --asprimary --size=200 --fstype=ext2 --ondisk=sda part swap --asprimary --size=16384 --fstype=swap --ondisk=sda part / --asprimary --size=512000 --fstype=ext4 --ondisk=sda part /scratch --asprimary --size=1 --grow

I am testing some kickstarts on ESXi virtual machine with pair of 16GB disks. Partitioning is lvm over raid. If i am using "logvol --grow i get "ValueError: not enough free space in volume group" Only workaround i can find is to add --maxsize=XXX where XXX is at least 640MB less than available. (10 extents or 320Mb per created logical volume) Following snippet is failing with

I have 2 questions dealing with 2 different kickstart files. 1) my kickstart sections for RAID disk setup and kickstart reports it cannot find sda. Why is that. sda is there and works. clearpart --all --initlabel part raid.01 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sda1 --size=20000 part swap --asprimary --bytes-per-inode=4096 --fstype="swap"

I was just wondering how (or indeed if) people use the %include directive in Kickstart configuration files when building systems via NFS. I've been trying to modularise our Kickstart files a little to make things more readable, having generic defaults and role specific stuff split out into separate configs. I've tried this configuration... [root at archive kickstart]# cat

On Thu, August 4, 2016 7:13 pm, Paul Heinlein wrote: > On Thu, 4 Aug 2016, Valeri Galtsev wrote: > >> Dear Experts, >> >> Could somebody point to kicstart HOWTO specific for CentOS 7? >> >> On CentOS 7 I somehow am always given human intervention questions >> about drive which defeats unattended ks install. >> >> At least one snag I hit

Hello, I'm trying to do a kickstart install of centos5. I'm pulling it off a network server and i'm getting an error, in the parsing of the file. It refers to line 31, i'm not going to show the complete file, but here is the indicated line: raid swap --fstype swap --level=RAID1 raid.4 raid.7 and the raid lines: part raid.7 --size=512 --ondisk=hdb part raid.4 --size=512

Hey, Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config. It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol) It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not

HI all, I just did a fresh C7 install using kickstart. fdisk -l /dev/sda shows: # Start End Size Type Name 1 2048 2050047 1000M EFI System EFI System Partition 2 2050048 104450047 48.8G Microsoft basic 3 104450048 112642047 3.9G Linux swap 4 112642048 234440703 58.1G Microsoft basic What extra do I need to

Hello, I've been trying to kickstart a install centos from a USB memory stick. Everything with that is working fine, but I seem to be having a problem with the ks.cfg file. When I boot the install media from the usb drive, the the boot prompt I type linux ks=hd:/dev/uba1/ks.cfg Then I peek at the logs and it even says * getting kickstart file * getting kickstart file from harddrive *

Hi All, This has to be something simple....but it's really busting my chops. We have a PXE boot server that is used for initial installation of a number of operating systems and it works well. However the CentOS 5.1 x86_64 install is seriously broken. We've made the PXE boot images available from "centos/5/os/x86_64/images/pxeboot/" in the tftp boot etc. We've rsynced

When I use my kickstart file (which works on 5.1 x86_64) with 5.2 I get the following error. I put my kickstart file at the end. Do I have something incomaptible in the file? jerry -------------------------------------- Traceback (most recent call first): File "/usr/lib/anaconda/network.py", line 341, in lookupHostname ret = isys.pumpNetDevice(dev.get('device'),

Is there a reason why after a software raid install (from kickstart) that md1 is always unclean. md0 seems fine. boot screen says md1 is dirty and cat /proc/mdstat show md1 as being rebuilt. Any ideas? Jerry --------------- my kickstart -------------- echo "bootloader --location=mbr --driveorder=$HD1SHORT --append=\"rhgb quiet\" " >

Does anyone know how anaconda partitioning enumerates disk partitions when specified in kickstart? I quickly browsed through the anaconda installer source on github but didn't see the relevant bits. I'm using the centOS 6.10 anaconda installer. Somehow I am ending up with my swap partition on sda1, /boot on sda2, and root on sda3. for $REASONS I want /boot to be the partition #1 (sda1)

I am trying to install Centos 7 on a couple 4TB drives with software raid. In the Supermicro bios I set UEFI/BIOS boot mode to legacy. I am using the Centos 7 minimal install ISO flashed to a USB thumb drive. So I do custom drive layout something like this using sda and sdb. Create /boot as 512 MB XFS raid1 array. Create SWAP as 32 GB SWAP raid1 array. Create / on 3.xxx TB XFS raid1 array.

I have a p4 motherboard with 2 ide interfaces, I connect 2 40 GB drives as hda and hdc, I install Centos 4 from a CDROM, and partition the drives as 2 x raid partition each plus a swap partition on hda, the make md0 and md1 to install /boot and / respectively. Install goes well, everything looks great, go to reboot from drives, and all I get is "grub" but no boot. I have tried this ten

I'm testing doing kickstart installations on Xen VMs. This is the first time I'm trying out kickstart at all, so I rather think I'm doing something wrong in the kickstart configuration than it is a Xen issue. I use a modified kickstart file from an earlier manual installation with a very basic filesystem setup. It fails with "SystemError: vgcreate failed for VolGroup00".

centos-virt, I'm trying to create/install domU guests all in "one" step, following Daniel's wiki page (I've found these pages really helpful, BTW): http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU I have a few questions about this process: (1) How would it be modified (w/respect to defining the disk in the domain configuration file) to use a disk layout where dom0