similar to: writing variables

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA)

Hello... First let me start by saying how terrific NUT seems to be. I have not gotten it working properly with my own UPS yet due to a driver issue, but all of the features I could dream up are in there. I've worked hard to hack around the OEM software from CyberPower for my PR2200 UPS to get it to remotely shutdown other computers on the network which are powered from that UPS, and they

[please use reply-all to include the list. thanks!] > On Nov 9, 2017, at 9:19 PM, Christoph Lampl <chris at weeone.de> wrote: > > Hey guys, :) > > recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. > > According to compatibility list, PR2200 should work fine, when using powerpanel driver: >

i own a CyberPower OR2200LCDRM2U and was wondering if any nut drivers support this ups. none i have tried have worked although usbhid-ups did tell me that the productid=0601 was not supported yet. i see in the compatability list on the nut website that the PR2200 is supported with the powerpanel driver but the OR2200 is not listed. i am interested in what i am doing wrong or if this is a support

2015-03-11 14:21 GMT+01:00 Jakub Scepka <jakub.scepka at gmail.com>: > Would you be so kind and provide some examples (commands), please? > I would run them today in the evening and report back with the logs. First, be sure to have in upsd.users a valid entry to set vars and execute instant commands: [<username>] password = <password> actions = SET instcmds = ALL where

Hi all, I've just upgraded my debian box from etch to lenny, and am now having Nut problems. I have read through the UPGRADING text (which helped fixed my first ups driver related problem), but have now hit another problem, which seems quite common, but non of the responses I've found on Google apply, so I'm coming to you for help. On issuing a "/etc/init.d/nut start"

Hello list, just a quick email to report that the following UPS was supported (mostly) out of the box: Model: PowerWalker VI 850 LCD Driver: blazer_usb upsc Output (please note I have manually populated the high and low voltages): battery.charge: 100 battery.voltage: 13.50 battery.voltage.high: 13.5 battery.voltage.low: 10 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups

Hi All, has anybody experience with CyberPower Smart/Sine wave series (especially PR2200SWRM2U) in NUT? I couldn't match model numbers on NUT hardware compatibility list. Thanks Gabor

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

Good Day Roger AA. notice that during the test, you have little or no load, since despite being in state OB DISCHRG the battery.charge is still 100. It's best to perform such tests with a dummy load such as a table lamp and an old fashioned incandescent 100 watt bulb. ==> Yes. I got it and try to ascend load as below results dinow-All-Series:~# upsc pcmups Init SSL without

Hi NUT-Users, we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This card supports the RFC1628 Definition. So I think this combination work together with NUT and the snmp-driver, correct? I installed the networkupstools on my Debian Sarge with apt-get (nut & nut-snmp). After configuration I start the upsd and upsmon. I get following output in /var/log/syslog: ... Aug 3

Hi. I'm from Russia. I try to use NUT with PowerWalker vi 400 se (usb). I use FreeBSD 7.0 (amd64) and megatec_usb driver. Settingup the NUT with FreeBSD installation procedure (Thierry Thomas, from FreeBSD). PowerWalker connect to the computer by usb cable on port usb0 (uhib0). NUT don't starting, and talk to me that supporting device not found. Please, help me. Thank's! With best

Using the HOWTO in http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ I installed nut on an Ubuntu Edgy LAMP Server with an Eaton Powerware 5110 attached to it via usb. But nut fails to start properly (see the error message "Starting Network UPS Tools: (upsdrvctl failed) upsd upsmon" below). It then complains about communication with the UPS being lost ("UPS

Thank you for the commands... Please find attached log... Im not sure if the Load.on worked, because in the end I had to manually start the UPS (with button). Anyway, let me know should I need to perform some steps again (probably yes, since I believe it was off). Jakub On 11.03.2015 20:11, hyouko at gmail.com wrote: > 2015-03-11 14:21 GMT+01:00 Jakub Scepka <jakub.scepka at

Would you be so kind and provide some examples (commands), please? I would run them today in the evening and report back with the logs. Thank you. Jakub S. On Tue, Mar 10, 2015 at 11:44 PM, hyouko at gmail.com <hyouko at gmail.com> wrote: > mmh.. it looks like someone forgot to hit 'reply all'. > > - relaying the originally attached files (gzipped, minus the two >

After issuing this command: /upsrw -s ups.delay.shutdown=180 -u admin -p mypassword myups /I obtain this error:/ Unexpected response from upsd: ERR READONLY /After issuing this command:/ upsrw myups /I obtain no output./ /In my /upsd.users/ file I have these settings: /[admin]// //password = mypassword// //actions = SET// //instcmds = ALL// // //[myuser]// //password = mypassword//

Are there any plans to allow us to specify UPS variables in ups.conf, eg: [evo_s_3000] driver = usbhid-ups port = auto desc = "Eaton Evolution S 3000" vendorid = 0463 productid = ffff ups.delay.shutdown = 120 ups.delay.start = 130 The reason I ask is that I'm using FreeBSD & gmirror and need to extend the gracetime

Hi, guys. I have a new CyberPower PR2200 which I'm trying to control using NUT. It has a serial port and I'm connected serially. I am using the cyberpower driver and before a power failure it seems to mostly be working: jeff@backup:~$ upsc cyberpower@localhost battery.charge: 000 driver.name: cyberpower driver.parameter.port: /dev/ttyS0 driver.version: 2.0.4 driver.version.internal: 1.00