Displaying 20 results from an estimated 10000 matches similar to: "[bug] Unexpected shutdown"
2006 Jan 09
2
Master privileges unavailable
Hi,
I'm using debian sarge on my server and connected a MGE-ups ellipse via
the serial port.
I searched the internet for the answer, but can't find it.
My config files:
<upsd.users>
[admin]
password = pwd
allowfrom = 127.0.0.1/32
actions = set
instcmds = all
[upsmon]
password = pwd
allowfrom = 127.0.0.1/32 10.0.0.224/32
upsmon master
[upsslave]
password
2018 Dec 01
2
MGE EllipseMAX 1500 shuts down after a few hours
The UPS is connected to the following environment:
OS: Debian GNU/Linux 9.6 (stretch)
NUT version: 2.7.4-5
Device output from lsusb: 0463:ffff MGE UPS Systems UPS
Model name: MGE EllipseMAX 1500
URLs:
http://powerquality.eaton.com/Products-services/Backup-Power-UPS/Ellipse-MAX-eol.aspx?cx=97&GUID=7BB6CD53-9F6D-4D62-B326-1099F137BF8D
http://powerquality.eaton.com/68558.aspx?cx=97
The problem
2012 Oct 09
1
network-ups-tools won't shutdown my PC
Hello,
I'm using Archlinux x86_64 with linux-nouveau kernel (based on
linux-mainline (that is linux-3.6)).
I've installed nut-2.6.5. I first tried to use new systemctl .service
scripts, but they are problematic.
So I start and stop nut from /etc/rc.c script.
This way, it "woks".
Here are my config files :
nut.conf :
MODE=netserver
ups.conf :
[ellipse]
driver = usbhid-ups
2006 Nov 16
6
FreeBSD 6.1, MGE Ellipse ASR600USBS, newhidups & upsd
Hello,
I'm facing problems as I'm installing NUT to monitor a MGE Ellipse
ASR600USBS on a FreeBSD 6.1 box.
UPS is recognized as :
ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2
I'm temporarily using root profile (devfs/devd scripts not modified atm).
newhidups starts & runs fine (unplugging mains makes newhidups outputs
lots of data when started with -DDDD flags)
2020 Jan 01
2
Belkin USB UPS Not Turning Off
Well it is the season for storms and power outages here in the US PNW. I
noticed that today when the power went out, NUT mostly did what I
hoped/wanted. But it did not actually turn off the UPS at all. The UPS
kept beeping and I had to turn it off manually.
I thought that NUT would handle this. But perhaps it cannot for my unit?
Or perhaps I have things improperly configured? Any suggestions?
2010 Nov 16
2
Shutdown script does not trigger
Dear nut users,
I am fighting to configure a smooth server shutdown with an ubuntu
server and a dell usb ups using nut.
It seems that the drivers connect properly (upsc gives very coherent
outputs).
However I can't get anything to happen when the ups goes on battery.
How can I be sure the the UPS status is really monitored ?
Is there a particular log file where I upsmon reports problems
2019 Jul 12
2
New User Questions - With Belkin USB
On Fri, 12 Jul 2019, David White wrote:
> Hello, thanks, and sorry for the delay in getting back. I am running the
> script and have move the comment from one D= line to the other. I am,
> however, seeing some errors written to the console. They are from line
> 64-65 of the script.
>
> Regarding line 64, I have no /usr/sbin/ups* and suspect the proper
> location on my
2016 Oct 11
5
CP1500AVRLCD NOCOMM
It looks like I'm currently on 4.4.0-38
uname -a:
Linux kvm 4.4.0-38-generic #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016
x86_64 x86_64 x86_64 GNU/Linux
On Mon, Oct 10, 2016 at 10:04 PM, Charles Lepple <clepple at gmail.com> wrote:
>
> On Oct 6, 2016, at 7:26 PM, Lane Russell <lanerussell028 at gmail.com> wrote:
>
> Ubuntu Server 16.04.1 LTS
> NUT 2.7.2-4ubuntu1
2011 Jun 08
2
Misconfiguration of Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port
Hello.
I've tried to configure Windows (complete port, Beta): Windows MSI installer
2.6.0-1 with my Powerware 5115 connected via USB port but have no luck.
Here is my config files:
*nut.conf:*
MODE = netserver
*ups.conf:*
[PW5115]
driver = bcmxcp_usb
port = notUsed
desc = "PowerWare 5115"
*upsd.conf:*
LISTEN 192.168.1.12 3493
*upsd.users:*
[monuser]
2016 Oct 26
2
setting up CYBERPOWER CP1500PFCLCD
I changed IP to NAS IP instead of my PC IP and also used NAS login and
pass. Didn't work. When I wanted to launch WinNUT with new settings I got:
"Fatal error: insufficient power configured!" (same as before)
I got this log:
Level INFO 10/26/2016 10:46:17 Detected OS as Windows NT
Level NOTICE 10/26/2016 10:46:17 Network UPS Tools upsmon 2.0.0.4
Level INFO
2017 Oct 18
2
debian 8 "jessie" nut 2.7.2 slaves not shutting down
OS name and version,
MASTER SYSTEM has three APC smart UPS 3000 UPS connected via USB
debian 8 "jessie" Linux pdxvhtst01 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19) x86_64 GNU/Linux
SLAVE SYSTEMS monitoring MASTER via IP
debian 8 "jessie" Linux geaaetst01
2011 Jul 19
2
KIN-1500AP RM + Windows 2008 64-bit Standard R2 SP1 (nut 2.6.1)
I have only RS-232 on the box (meanwhile, it was manufactured on march of
2011)
Here is my configs:
nut.conf:
*
*
MODE = netserver
ups.conf:
*
*
[KIN1500]
driver = powercom
port = notUsed
desc = "Powercom KING PRO KIN-1500AP RM"
upsd.conf:
*
*
LISTEN 192.168.1.2 3493
upsd.users:
*
*
[monuser]
password = xxxxxxxx
upsmon master
2012 Jan 28
2
No shutdown on empty battery
Hello,
I set up a FreeBSD 8.2 system with nut 2.6.1 and a Powerware 5115
connected by RS-232. I expected this setup to shut down before running
out of battery power, but I either missed some important configuration
or something else went wrong:
The syslog says:
Jan 9 05:03:42 b1 upsmon[67752]: UPS upsb1 at localhost on battery
Jan 9 05:04:42 b1 upsmon[67752]: UPS upsb1 at localhost on line
2006 Aug 08
1
2.0.1 upsmon memory leak
Hi;
I have ran into an issue with the upsmon tool leaking memory over a
two month period. It seems to be due to one of my UPS hosts offline.
System is a debian stable with the default nut package. Here's the
data so far:
companyfs1:/var/log# ps aux | grep [n]ut
nut 2439 0.0 3.6 380800 18800 ? S Jun05 6:41 /sbin/upsmon
>From my logfiles its failing on one of my UPS
2012 Apr 11
1
NOTIFYCMD doesn't work from Windows service
Hello dear all,
I try to use NUT for windows (not WinNUT), and stuck with launching NOTIFYCMD.
On any event marked as SYSLOG+WALL+EXEC syslog entry appears, popup
window appears, but NOTIFYCMD script doesn't run.
If I run upsmon.exe in cmd (i. e. not as a service) everything works fine.
Here is my upsmon.conf:
MONITOR central at 10.35.0.180 1 user password slave
MINSUPPLIES 1
SHUTDOWNCMD
2007 Jun 13
4
false alerts/shutdown
Hello,
I've installed Nut (2.0.5) on RedHat a week ago, and upsmon seems to
generate false alarms every hour:
...
Jun 8 06:10:56 nutevalserver upsmon[2849]: UPS
usb-mge-evolution at localhost on line power
Jun 8 06:35:46 nutevalserver upsmon[2849]: UPS
usb-mge-evolution at localhost on battery
Jun 8 06:35:51 nutevalserver upsmon[2849]: UPS
usb-mge-evolution at localhost on line power
2006 Feb 14
3
Master privileges unavailable on UPS
Hello all,
I'm having problems with what I'm told should be a straightforward
issue.
The message in /var/log/daemon is:
<quote>
Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on
UPS [lupin1500AVR@localhost]
2019 Jul 09
5
New User Questions - With Belkin USB
On Jul 9, 2019, at 12:22 PM, David White wrote:
>
> So I guess I am wondering if this is related to my problem. I have no idea how the blazer_usb driver works.
For the most part, NUT drivers ending in “_usb” (including blazer_usb) do not need a serial device node in /dev. They use libusb to talk directly to the UPS. (If you can reliably read the UPS status with upsc, then the connectivity
2014 Jan 21
3
Shutdown when both (all) UPS on battery / low battery
On Jan 21, 2014, at 3:16 AM, Rafa? Oleszek wrote:
> I would like to mention that MINSUPPLIES manipulation doesn't work. My nut version is : 2.2.2-4 (RHEL 5)
What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines
2006 Aug 16
5
Master privileges unavailable on UPS, no access :(
Hello!
After I type "upsmon", in syslog the following message appears:
Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost]
Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied
Can you tell me where my error is, my configuration files are:
ups.conf:
[Inform]
driver = powercom
port = /dev/ttyS0
desc = "inform guard"
linevoltage = 220