similar to: Bug#439055: hid driver tries to mmap huge area, fails

Windows 7 Pro x64, NUT 2.6.5-4 (interim release) Product: Back-UPS RS 1200 FW:8.g3 .D USB FW:g3 Setting UPS values can be confusing. For example, battery.charge.low and battery.runtime.low. Using upsrw, the values will be retained after restarting the OS, but not if the UPS is turned off/restarted. In the driver log (below), it looks like the values are obtained from the UPS, but if I set

Hi All, I'm trying to shutdown my UPS using NUT driver version upsdrvctl -V Network UPS Tools - UPS driver controller* 1.01-906.* My UPS details are the following : battery.charge: 100 battery.charge.low: 5 battery.charge.warning: 50 battery.runtime: 22980 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 26.8 battery.voltage.nominal: 24.0 *device.mfr: American Power Conversion*

Hi, thank you so! much. Turning off avahi daemon was the solution! rapsberry instead of raspberry is a typo during porivision actually. Thank you again :) I will write an entry on my blog to make sure that does not happen again. One last time for google bots. IF you receive kinit: Cannot contact any KDC for realm while getting initial credentials make sure you don't run avahi However

Hi, i am really depressed at this moment. I set up an domain controller using samba4 and an raspberry pi. I can join the domain and everything works BUT kerberos has some strange problems resolving my raspberry hostname. First of all some information: Raspberry pi is DHCP Server and DNS-Server (BIND9). First of all the configurations: Code: /usr/local/samba/etc/smb.conf # Global

Hi, /etc/resolv.conf looks exactly like this: domain family.rapsberry.local search family.rapsberry.local nameserver 192.168.178.222 So to answer your question: yes the only Nameserver the raspberry has is itself. Greetings Am 2015-01-03 um 7:40 PM schrieb Rowland Penny: > On 03/01/15 16:31, Robert Hartmann wrote: >> Hi, >> >> i am really depressed at this moment. I set

Hello, Got PowerCOM BNT-1000AP, usb id 0d9f:00a6, firmware FW4.A6 nut 2.4.3 on debian stable shows only two instant commands: beeper.toggle - Toggle the UPS beeper -- not working test.battery.start.quick - Start a quick battery test -- works ok. No load and shutdown commands. Trying svn trunk version, with the same results. Debug output shows the problem: 0.035558

I've acquired and installed NUT 2.4.1 on a D-Link DNS323 NAS. With exception of Load and Battery Temp readings all works well. A upsc ups at localhost command returns; battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2008/06/05 battery.runtime: 2122 battery.runtime.low: 120 battery.temperature: 3022999999999998800 battery.type:

http://bugzilla.netfilter.org/show_bug.cgi?id=734 Summary: Iptables on Arm Processor with Vanilla Kernel Product: netfilter/iptables Version: linux-2.6.x Platform: arm OS/Version: Debian GNU/Linux Status: NEW Severity: critical Priority: P5 Component: unknown AssignedTo: netfilter-buglog at

On Tue, 20 Jun 2006 22:38:24 -0500 (CDT) Chris Lattner <sabre at nondot.org> wrote: > > >> Is this really the number of bytes of machine code ? > > Yes. > > To be specific, this is the number of bytes of machine code JIT'd. Thus, > this only includes the stuff reachable from main, for example. To see > specifically what functions it is compiling and

Hi all. On Sep 26th I decided to try and get ipp2p working on my machine that acts as a gateway for my Internet connection. This machine is running Debian. I performed the install by doing the following steps: - I installed the Debian package called linux-source-2.6.22 for my Linux kernel source and unpacked the resulting tar.bz2 file. - From the netfilter.org site I downloaded the following

Peter, I have been doing some more testing and I find that if I modify the libusb.c file to set a report size in libusb_get_report to 16 the error messages go away. This is the code as it currently stands: static int libusb_get_report(usb_dev_handle *udev, int ReportId, unsigned char *raw_buf, int ReportSize ) { int ReportSize_test = 16; unsigned char raw_buf_test[ReportSize_test +

Have recently purchased a MGE Nova 1100 UPS and am trying to get running on netBSD. Configuration netBSD 3.0 amd64 libusb 0.1.10a nut 2.0.3 Built & installed libusb Built kernel with ugen device and uhid removed Build & install nut-2.0.3 with usb Chmod /dev/ugen1 etc to allow access by nut user. Ups.conf [MGENova] driver = newhidups port = auto

On Nov 22, 2005, at 19:10, Reid Spencer wrote: > 1. What is the path name associated with TmpArchive? If its the same > as the path name associated with archPath then that's a bug, probably > introduced when Path::makeUnique is called from > Path::createTemporaryFileOnDisk which is called from line 377 of > ArchiveWriter.cpp. This does not appear to be the problem. I

Hello together, since upgrading on samba 3.0.x (issue happens with all 3.0. release) the cpu-load on my samba PDC ist constantly near 100%. The cpu power ist consumed by all running smb-processes. Systrace shows me that the smb processes tried to access to /etc/passwd on a permanent basis. My question is: Why tries samba to access etc/passwd so often and produces this high cpu-load? Regards,

Hello all, I think I've found the "regression" in Belkin/Liebert USB HID support which worked for NUT v2.7.4 and reports zero voltages in 2.8.0 -- it was actually caused by a bug fix: practically the only functional difference per `git diff v2.7.4..v2.8.0 drivers/belkin-hid.c` is a change from `abs()` to `fabs()` in order-of-magnitude comparisons like `if( abs(value - 1e-7) <

Hello all, I think I've found the "regression" in Belkin/Liebert USB HID support which worked for NUT v2.7.4 and reports zero voltages in 2.8.0 -- it was actually caused by a bug fix: practically the only functional difference per `git diff v2.7.4..v2.8.0 drivers/belkin-hid.c` is a change from `abs()` to `fabs()` in order-of-magnitude comparisons like `if( abs(value - 1e-7) <

Hi, I've been using NUT for many years to look after the UPS on my home servers. Originally I was using a Compaq R3000 but that was replaced with an MGE Pulsar Evolution 3000 about a couple of years ago because the Compaq one was just too noisy! I'm just setting up a replacement server and would like to connect it using a serial cable as I've found that the USB connection

I have made some more research and found out the following .. thor:~# df -i Filesystem Inodes IUsed IFree IUse% Mounted on -[cut]- /dev/mapper/vgraid-data 475987968 227652 475760316 1% /data thor:~# strace e2defrag -r /dev/vgraid/data -[cut]- mmap2(NULL, 1903955968, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x46512000 (delay 15 seconds

Hello. So as my english is not so good, i'll try to write my story in bash commands :o) miwa@zork3$ uname -mrs FreeBSD 5.5-STABLE i386 miwa@zork3$ su root@zork3# cd /usr/ports/sysutils/nat root@zork3# make && make install root@zork3# cd ../nut-usb root@zork3# make && make install root@zork3# cd /usr/local/etc/nut root@zork3# cat ups.conf user=root [MGE-Ellipse]

On Fri, Jun 18, 2010 at 11:09:10AM -0700, Dwayne Fontenot <dwayne.fontenot at att.net> wrote: > > open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 > fstat64(3, {st_mode=S_IFREG|0644, st_size=80626448, ...}) = 0 > mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0x30041000 > mmap2(NULL, 245760, PROT_READ, MAP_PRIVATE, 3, 0x2330) = 0x30241000 >