similar to: usbhid-ups on openSUSE 10.3 does not see MGE Ellipse 1500

Hi, I bought an Ellipse MAX 1100 a few months ago. First I attached it to my desktop and installed mge's personal solution pac. (a graphical interface which uses nut). It works. But I want to attach the ups to my server which runs without an x-server. I followed http://opensource.mgeups.com/install/debian.htm. Didn't work. Then I copied over the configuration files which the personal

Hi, I have recently purchased MGE ellipse 1200 UPS for my home system. Obviously, the choice of this particular brand was mainly dictated by MGE's long-standing support for Linux and NUT project. The fact that the box was clearly the prettiest looking one on the block did help also ;-). I have had NUT tools installed and configured in no time, as I did it numerous times before -- kudos

Can anyone point me to information for getting the Tripplite SMART3000RM2U to work with NUT? Our newer Tripplite units seem to work with the usbhid-ups driver, but these older ones seem to need something different. So far I have had little success getting tripplite_usb to work. [root at banyan ~]# tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.1)

On Apr 23, 2014, at 3:47 AM, Frantz de Germain wrote: > I've compiled and installed nut-2.7.2 on a Xen server (Actually XCP > 1.6/Centos 5.7) to manage a Dell UPS 2700W. > > Here is my ups.conf : > > [SU27003U-08] > driver = usbhid-ups > port = auto > desc = "SU27003U-08" > > 52-nut-usbups.rules have well been installed in

Hello, I've compiled and installed nut-2.7.2 on a Xen server (Actually XCP 1.6/Centos 5.7) to manage a Dell UPS 2700W. Here is my ups.conf : [SU27003U-08] driver = usbhid-ups port = auto desc = "SU27003U-08" 52-nut-usbups.rules have well been installed in /lib/udev/rules.d/. I've put it in /etc/udev/rules.d/ too. I've rebooted the machine.

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

Hi. I'm using nut with debian squeeze. When the computer boots and nut is loaded, I get the following messages: "Starting the hotplug events dispatcher: udevdudevd [451]: BUS= will be removed in a future udev version. please use SUBSYSTEM= to match the event device. or SUBSYSTEMS= to match a parent device. in /lib/udev/rules.d/52-nut-usb.rules:6 . Synthesizing the initial hotplug

Thanks for suggetions and keep me indumb about making of Debian packages:D I will try this package "nut_2.2.0-2_i386.deb" One little questionm, shoud I use newmge-shut driver? - my ups is quite old - more then 3 years, connected through serial cable. >> PS: Arjen de Korte suspected something was wrong around my "heater" load, >> for now I have used two 150W lamps

Hi, I've got two MGE Ellipse 1500 UPS connected via usb to an ubuntu jaunty system with nut and libupsclient1 2.4.1-2ubuntu4. As soon as I start the driver for the second one, they start fighting each other and I get no data. I found an older post to this list that said: If you want to monitor multiple UPSes through usbhid-ups, you *must* make sure that each one can be uniquely identified

upsmon.conf using NOTIFCMD and NOTIFYFLG is working well, it is calling my script "notify" on requested events (ONBATTERY,LOWBATTERY and ONLINE). Command #upsmon -c fsd -u monmaster myups at localhost gracefully shutdown my box and after several seconds switch off the ups's load. Two problems: - notify script is called and executed as user "nut" (as it used to be

On Sat, Jun 27, 2020, at 23:11, Manuel Wolfshant wrote: > On 6/28/20 5:54 AM, Scott Colby wrote: >> >> I'm not convinced this is the problem; I think that pfSense has an alternative way of running the NUT components: # ps aux | grep ups root 45456 0.0 0.1 6796 884 - Is 02:22 0:00.01 /usr/local/sbin/upsmon uucp 45751 0.0 0.1 6796 772 - S 02:22

Hello, I have Ellipse ASR 1500 UPS and now I'm trying to monutor it with NUT from FreeBSD. It seems that there are some problems with this UPS: =================================== ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 > usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2

I wouldn't be surprised if they both use the same driver. I think they are essentially the same model, but with one having a slightly larger battery. My issue is primarily with the UPS turning back on after having shut off like it should. @Scott Colby if you take a look at the config files I posted in the github issue I created, perhaps that will give you some hints on your issue. Maybe

Hi, I've have had some difficulties to run NUT on freebsd, but I finally managed to have something that work reliably enough. For those who may be interested, here is what I did. Os: FreeBSD 6.2-RELEASE-p7, nut: 2.2.0, libusb: 0.1.12 First, I had to patch libusb with the changes submitted by Nevil Thatcher in the nutups forum in may 2006. Without this change, nothing works.

My UPS is a Eaton Ellipse 1000S (But its identified as MGE Ellipse 0463:ffff). I have been using the usb interface with the usbhid-ups driver, but I found that sometimes (too much times) the driver doesn't respond and NUT doesn't receive changes nor notifications from the UPS. The kernel lose the connections with USB device, in the kernel logs appears: Dec 30 11:24:12 rei kernel:

Hello, I have an MGE Ellipse 500 UPS for about 8 years, connected to a local OpenBSD server through usb, running nut-2.2.1. I used to occasionally drain the UPS battery to see if the local server was shutting down cleanly my desktop PC and it was working OK. Suddenly, there was a power failure last week, the UPS was serving the two PCs (the server and the client) for 30 secs and then it went

Hallo group, I am running openSUSE 10.3 with nut-2.2.0-20 installed. I have configured it as mentioned in /usr/share/doc/packages/nut/README.SUSE. on starting nut using "rcupsd start" i get following: # Starting NUT UPS monitor done Broadcast Message from root at pane (somewhere) at 22:27 ... Communications with UPS myups at localhost

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left.

I have trouble in getting communication work with MGE Ellipse 500. I bought it second hand and I don't have the cable for it. How do I know if it's the Serial or USB model? The serial number of the unit is: 769B16015. I suspect it is the serial version as the label next to the RJ11 stands "com port", but I can't be 100% sure. MGE Ellipse serial cable pinout can be found

I am running Ubuntu 6.06 connected via serial port to an MGE Pulsar Ellipse 800VA. Have just installed NUT 2.0.3, and have problems with connectivity. This UPS was workign via serial connectivity to a BSD system only a few days ago. I have followed the instructions at http://opensource.mgeups.com/install/debian.htm The details... jason@ubuntu:~$ ls -la /dev/ttyS? crw-rw-rw- 1 root dialout 4,