Displaying 20 results from an estimated 4000 matches similar to: "Nut problems with Centos and Belkin UPS"
2007 Feb 23
2
how do I find the association between a usb port and a /dev entry?
I looked through the faq, but couldn't find an answer to this.
I'm trying to configure nut-2.0.4-26 on SuSE linux 10.2.
In ups.conf, I have
[myups]
driver = belkinunv
port = /dev/undefined
desc = "Local UPS"
I'm trying to find out what the port should be set to.
lsusb shows:
Bus 001 Device 005: ID 050d:0980 Belkin Components
Device Descriptor:
bLength
2007 Dec 11
1
Battery is low bug (again) w/ Belkin/USB UPS (2.x=bug, < 2.0 works)
Hello,
http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-September/003137.html
http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-July/003014.html
http://permalink.gmane.org/gmane.comp.monitoring.nut.user/2552
I still have this problem:
$ dpkg -l | grep -i nut
ii nut 2.2.0-2 The core system
I thought this bug was fixed :(
syslog:Dec 10
2007 Jul 07
1
Problems with (older) Belkin UPS & usb
Hi,
I have several Belkin UPSes here that I'm trying to connect through
USB. I just downloaded 2.2.0, but unfortunately I'm getting error
messages. All testing was done as root.
The driver says (full output is attached):
---SNIP---
eta nut # ./usbhid-ups -x productid=0750 -DDD -a belkin
<...cut...>
Checking device (050D/0750) (003/007)
- VendorID: 050d
- ProductID: 0750
-
2006 Aug 25
2
Add USB vendor/device id for Belkin F6C120-UNV
I just moved my UPS over from serial to USB and found that I needed to
add it to the hotplug USB list to make things work.
Belkin F6C120-UNV
- Bus 002 Device 004: ID 050d:0912 Belkin Components
It seems to be working OK on 2.0.4 with newhidups. Attached is a patch
which I think should add the appropriate device id's in the right places
to the trunk code.
Jon
-------------- next part
2006 Aug 28
1
Re: [nut-commits] svn commit r507 - in trunk: drivers scripts/hotplug scripts/hotplug-ng
Just a little tiny detail :
==============================================================================
> --- trunk/scripts/hotplug/libhid.usermap (original)
> +++ trunk/scripts/hotplug/libhid.usermap Fri Aug 25 19:18:19 2006
> @@ -21,5 +21,7 @@
> libhidups 0x0003 0x09ae 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00
2008 Mar 28
0
Belkin F6C1100-UNV not recognized by megatec_usb?
Hi everyone,
I have a belkin ups that was bought around 2 months ago. It seems like
the driver doesn't like the UPS, although on the website it's listed
as supported. This is on a gentoo system with nut 2.2.1 .
megatec_usb output:
---------SNIP----------
digamma nut # ./megatec_usb -a belkinm -DDDDDD
Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb]
Carlos Rodrigues
2009 May 31
6
Belkin support?
Greetings;
I have the newest nut (nut-2.2.2-4.fc10.i386) from fedora 10 repos) installed
and this ups (from lsusb -vv):
Bus 001 Device 006: ID 050d:0751 Belkin Components
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
2009 Mar 04
3
Nut with megatec_usb
Hi,
I'm new in the list and I'm having a little bit trouble to put the
megatec_usb to work.
I've been using NUT for a while with the apc and megatec driver (serial),
with no problem.
The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the
default package version in this ubuntu release.
I've configured the ups.conf as follows:
[sms]
driver = megatec_usb
2009 Mar 04
3
Nut with megatec_usb
Hi,
I'm new in the list and I'm having a little bit trouble to put the
megatec_usb to work.
I've been using NUT for a while with the apc and megatec driver (serial),
with no problem.
The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the
default package version in this ubuntu release.
I've configured the ups.conf as follows:
[sms]
driver = megatec_usb
2006 Jul 24
1
Fw: INFOSEC 500 XP en USB et drivers newhidups avec '-x generic'
Bonjour,
Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous)
DaneZ
_____
From: DaneZ [mailto:david.guillotte@danez.no-ip.org]
To: arnaud.quette@mgeups.com
Sent: Sat, 08 Jul 2006 23:24:06 +0200
Subject: Fw: INFOSEC 500 XP en USB
_____
Bonjour Arnaud,
Je me
2011 May 30
2
UPS Liebert GXT3 config
Hi all,
I?ve a UPS Liebert GXT3 500-3000VA with USB port.
I?ve install NUT version 2.2.2 from repository packages for Debian Lenny.
Linux kernel 2.6.26
I?ve try to use usbhid-ups driver in ups.conf
[liebert]
driver=usbhid-ups
port=/dev/usb/hiddev0
Debian get the usb:
# lsusb -v
Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS
Device Descriptor:
bLength
2010 Apr 01
1
amacrox ap1000 problems
Ok guys I get this errors:
Network UPS Tools ? UPS driver controller 2.4.1
Network UPS Tools ? Generic HID driver 0.34 (2.4.1)
USB communication driver 0.31
No matching HID UPS found
my ups.conf is:
[ap1000]
driver = usbhid-ups
port = auto
I?ve also tried to set a specific usb port and change driver.
My ups is a AMACROX 1000
http://www.amacrox.com//english/01_product/02_01detail.aspx?pdid=46
2007 Jul 01
3
ST7 RS232 USB Bridge (STMicroelectronics) UPS
I used a brazilian UPS from "TS-Shara" which uses the megatec
serial protocol and it works perfectly. Now I have another one from the
same brand (TS-Shara) and it uses a USB cable. I found the following:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0483 ProdID=0035 Rev= 2.00
S:
2006 Apr 14
1
Mustek Powermust 600USB and newhidups
So, I have this Mustek Powermust 600USB (no serial port) here
temporarily. It seems to be a hid device.
The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and
"vendorid=06da") are (respectively):
-----------------------------------------------------------------------------------------------
Bus 001 Device 002: ID 06da:0003 Phoenixtec Power
2008 Sep 11
2
Ippon device does not work
I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to
connect it using USB.
lsusb -v says:
Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
2015 Sep 24
2
FreeBSD backed with a PR1500LCDRT2U
>>
>> The output was also not as big as you made it out to be.
>
> Well, I didn't expect the driver to fail *that* badly :-)
>
> Assuming the UPS is still at /dev/ugen4.2, can you try the following command? (Probably needs to be run as root, with the driver stopped.)
>
> usbconfig -u 4 -a 2 dump_curr_config_desc
Here is output of the command. Thank you for
2007 Aug 25
2
Belkin VA 550 USB Not Supported With nut 2.2.0
# /lib/nut/megatec_usb -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with
2017 Jun 19
2
Unable to use nut-2.7.4 with Eaton 5E1500I USB
On 06/19/2017 05:33 PM, Charles Lepple wrote:
> On Jun 19, 2017, at 4:27 AM, Manuel Wolfshant wrote:
>> 1.014501 [D2] Unable to get HID descriptor (Pipe error)
>> 1.014511 [D3] HID descriptor length (method 1) -1
> So at this point in the logs, the kernel USB HID driver is detached from the UPS HID interface (until the UPS USB cable is unplugged and reattached). If
2020 Mar 07
2
Power Shield Defender 1200 - The Story Continues
Hi,
Sometime ago [ June 2018 ] I posted a message about getting trying to
get NUT to work with a Power Shield Defender 1200VA UPS. This model
appears in the HCL at https://networkupstools.org/stable-hcl.html
That UPS reported the following when queried using 'lsusb' on an iMac
running macOS [ 10.15 ]
Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
2016 Oct 25
2
Questions about Eaton 5E 1, 100W 2, 200VA 6-Outlet UPS
I recently purchased a UPS from
http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS
It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS
SKU: 147140
Mfr Part #: 5E2200USB-LA
UPC: 743172064875
"The Eaton 5E is an essential line interactive UPS that provides cost
effective and reliable power protection against power outages and bad power
quality. Thanks to its small