similar to: Driver: apcsmart, SMART-UPS 2200, battery.runtime status information?

Listmates, After wrangling with the voltage value on the CyberPower 1000AVRLCD and now having 2 of them working, I though it would be a simple matter to move my APC BP650 from apcupsd to nut so that all 3 servers would be monitored on the same web interface. The APC is attached to an older box running openSuSE 11.0 with nut-2.2.2-66.1. (nut-classic). The APC BP650 uses a serial connection

G'day y'all, Here's a tiny patch set for drivers/apcsmart.c and drivers/apcsmart.h. Adds APC SmartUPS 1250 ("8QD" case) + 940-0024C recognition to apcsmart. (Unpatched apcsmart.c v1.99.8 misidentifies the SmartUPS 1250 as a "dumb" UPS.) For NUT 2.0.5+. NUT 2.0.5: Patches apply successfully. Builds successfully. Works as expected under Ubuntu 7.04. NUT 2.2:

Hello, I am working on getting NUT working with my Smart-UPS 900 UPS (with the C c= able) For several years, I have used the apcupsd product, but because of the nagios support for nut, I am working on switching over. Under apcupsd, I get tons of information from my UPS: # /usr/local/sbin/apcaccess status DATE : Sat Jul 09 12:56:41 CDT 2005 HOSTNAME : homer RELEASE : 3.8.6 UPSNAME :

I have a new APC Smart-UPS SUA2200RM2U. I've had no success with the manufacturer's PowerChute software and smart signaling, so I have decided to try NUT. The smartups driver can't make contact through the serial port. Since this is rack-mounted, it comes with a 940-1524 serial cable. As far as I can tell, this is supposed to work with smart signaling. Here's my ups.conf:

I apologize for posting on this question again, but unfortunately, I don't have and can't get access to MASS for at least three weeks. I have found some code on the web however which implements the prediction error algorithm in cv.glm. http://www.bioconductor.org/workshops/NGFN03/modelsel-exercise.pdf Now I've tried to adapt it to my purposes, but since I'm not deeply familiar

Michal, I ran across this Debian bug today: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707223 It's a bit of a corner case, and it's for NUT 2.6.4 (apcsmart driver v3.04), but I was wondering if it was still applicable for the latest code? "nut reports 100% battery charge after unplugging the battery on a Smart-UPS 2200 RM (SUA2200RMI2U) using apcsmart. Powerchute correctly

Using nut v2.2.2, and the APC serial cable. I have a client who's APC SMART-UPS 1500 (circa 2000) is always reporting LB. The batteries were old so they were replaced two weeks ago with brand new batteries. UPS still reported low batteries... I ran a calibration and a test on the unit (using the nut upscmd utility) During those tests, the battery charge on the unit goes to zero and slowly

Hey Jarett, 2009/2/24 <jarett.stevens at usermail.com> > After upgrading to the 2.4.1 version, I wasn't able to read as many > variables from my UPS. After a bit of experimentation, I determined that > the firmware on my UPS was different than what is currently in the > apcsmart driver, though it had worked before. I located my firmware > version (5ZM), and added in

On Aug 9, 2013, at 7:18 AM, Michal Soltys wrote: > I'm still a bit reluctant to merge it without a bit wider exposure, so if anyone has a possiblity to test it with some apc units - any feedback would be most welcome. Apparently, a lot of people are using NUT via packages, so: * users might not want to build from source if things are working * the packagers might not pick up a 2.7.x

Before I start any commits. In patch 2/18 - http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-March/005299.html Two "custom" commands slipped in: ups.firmware.old and shutdown.return.grace. In 18/18 I tried to rename them and add remainig commands for "hackish" shutdown methods, to make them easily callable through e.g. upscmd (for example for testing). Is it

Hi, The devel branch has some long standing updates implemented - mostly a result from past bug/issue reports. Among those: - selectable normal / canonical mode (useful in windows and perhaps with some problematic usb/rs cards) - some compat entries - certain (old) class of psus returning something else through 'b' treated as a whole set - can handle mutlivalue entries (e.g.

Hi, The devel branch has some long standing updates implemented - mostly a result from past bug/issue reports. Among those: - selectable normal / canonical mode (useful in windows and perhaps with some problematic usb/rs cards) - some compat entries - certain (old) class of psus returning something else through 'b' treated as a whole set - can handle mutlivalue entries (e.g.

Hello, the appended patch converts the reason of transfer to be human readable. How about adding this variable to the usbmon message when it detects being on battery? Michael ---------------------------------------------------------------------- --- ./drivers/apcsmart.h.orig 2009-12-09 16:52:56.000000000 +0100 +++ ./drivers/apcsmart.h 2009-12-09 16:54:34.000000000 +0100 @@ -98,6 +98,7 @@

On several occasions I have seen the apcsmart process runaway using 100% CPU while filling my syslog partition by logging the following syslog entries at an incredible rate. I have seen up to 21,800 log entries PER SECOND of the following nature: --[snip]-- Jun 25 10:06:38 servername apcsmart[4012]: Communications with UPS lost: Communications with UPS lost - check cabling Jun 25 10:06:38

Inital tests with two apc units (2005 and pre-2000) seem to go well. See commit message for details. I'll add more detailed rationale after getting some sleep :) Michal Soltys (1): apcsmart: switch processing to ICANON + minor fixes drivers/apcsmart.c | 270 +++++++++++++++++++++++++++++++++++----------------- drivers/apcsmart.h | 127 ++++++++++++++++--------- 2 files changed, 267

Hi Alex, since I have no knowledge of the apcsmart driver, nor much time currently, I've forwarded your msg to the NUT development list. I hope somebody can take over your call. btw, please subscribe to the list for further discussions... 2007/5/28, Alex Brodsky <abrodsky at acs.uwinnipeg.ca>: > Hi, > > My name is Alex Brodsky, I am a faculty member at University of >

Hi, We have a several AP9612TH environmental cards (they have 2 probe connectors) inserted into our APC UPS devices which monitor temperature and humidity. The apcsmart nut module knows how to query the ambient.temperature and ambient.humidity using the 't' and 'h' commands of the UPS (refer to apcsmart.h). The results of the 't' and 'h' commands are from probe 1.

Citeren Michal Soltys <msoltyspl-guest at alioth.debian.org>: > Log: > apcsmart: allow tearing down/setting up serial connection during > normal activity; If this is needed at all (why?), I don't think this should be handled at driver level, but this would need to be in the serial.c library. Opening/closing a serial port is independent from the protocol used (no data

Michal, Could we make this error a warning, or make the readback configurable? - Charles On Oct 21, 2011, at 7:56 PM, <nut-bugs at alioth.debian.org> <nut-bugs at alioth.debian.org > wrote: > Bugs item #313395, was opened at 2011-10-21 16:56 by Jesse Peterson > You can respond by visiting: >

I've merged apcsmart branch with master, so it should cover past issues mentioned on the mailing list - among those: - it's possible to select canonical and non-canonical mode - with the latter functioning as in apcsmart-old - CR is back to ignored characters, as IGNCR was not honored in some cases (mainly windows machines) - mutilvalue variables are now supported - the driver can