similar to: Belkin F6C1100-UNV not recognized by megatec_usb?

Hello all: I have a Yukai PowerMust 1000 USB and it used to work on another computer using megatec_usb driver. Now, I have it in a new computer, but the driver does not detect it. It is there: # lsusb|grep Cypress Bus 006 Device 007: ID 0665:5161 Cypress Semiconductor USB to Serial Permissions are OK: # ls -l /dev/bus/usb/006/007 crw-rw-r-- 1 root nut 189, 646 ago 8 01:51

Hi all! I have a ups Ippon smart power pro 2000. And it connects to my FreeBSD 7.2 x86 server throught usb. I'm try to setup it in nut with megatec_usb driver... But it is not recognizes ups. I'm try set productid and vendorid in ups.conf, but this is not help. Nut version 2.4.1 below i'm add output of lsusb, my ups.conf and /usr/local/libexec/nut/megatec_usb -a IPPON -DDD

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

hi, i've bought a 750VA orvaldi ups http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 which holds my hardware (wifi router, cable modem, quad-core with raid and lcd monitor) for ~15 minutes. pretty nice result for a cheap (~57 euro) home ups. in fact, the vendor software for linux is very old (e.g. requires ancient redhat with qt2), requires db9 port while shipped

Hi everybody, In a christmas sequel I've been offered one of the units mentioned above. I've tried to connect it to my Fedora 8 workstation but rapidly concluded it's not yet supported by NUT. So far, I've decompiled the Java classes of the manufacturer's application and noticed that it's most probably yet another kind of serial protocol through the USB. Since

Hi Charles. I patched, reconfigured, remake'd, remake install'd - but no change. however, some more likely helpful information below for you. Thank you On Mon, Jun 8, 2015 at 12:34 PM, Greg Hersch <hersch.greg at gmail.com> wrote: > > > On Sun, 7 Jun 2015, Charles Lepple wrote: > >> [please use reply-all to include the list, as the list does not override >>

Greetings, Any suggestions? I think I'm close but I can't quite get tripplite_usb to talk to my OMNI1000LCD. I'm new to NUT and couldn't find an answer using Google. With any luck, I've simply missed the obvious. The system I'm using, kaylee, is a debian stable system with some debian testing installed and a 2.6.15.4 kernel. I downloaded NUT 2.0.3 and built it from

[Note: trimmed HTML] ---------- Forwarded message ---------- From: selinger@mathstat.dal.ca (Peter Selinger) To: jon.gough@eclipsesystems.com.au (Jon Gough) Date: Sun, 28 Jan 2007 02:20:48 -0400 (AST) Subject: Re: [Nut-upsuser] Ablerex 625L USB version Hi Jon, I can't figure out which version of NUT you are running, because you have pruned that information from your output. Also, which

Hi, I've got two Dynamix UPS's, both of which are USB and don't seem to work with NUT yet. Can anyone give me some advise on where I should start with working on getting them working. I can do a little C programming, so happy to give things a go but need some guidance. Brian R. Smith (who also subscribes to this list) has one as well. I've attached the output of lsusb -v and

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE

Hi, I have two ups (Turbo-X 1000SD, Turbo-X 1500SD). The both report themselves as # lsusb Bus 008 Device 002: ID 0001:0000 Fry's Electronics The are produced by MEC and report MEC0002 as product (although the working one report it in dmesg but not in lsusb) The 1000 (bcdUSB 1.00) works with blazer_usb while the 1500 (bcdUSB 1.10) doesn't. I am attaching lsusb and blazer_urb output

Apologies for the long post. I'm trying to include what I hope are the relevant bits (output of lsusb -v and usbhid-ups) Long term goal: I've got a DIY UPS that I would like to get working with my QNAP NAS (which uses Linux and NUT underneath the hood) Immediate short-term problem: I can't get past running usbhid-ups on Ubuntu 23.10 with an Arduino Leonardo. I have an Arduino Micro

Hello everyone, has anyone ever tried to make this device work with Linux and NUT? This is what udevadm monitor says: UEVENT[1215983089.652345] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1 (usb) UEVENT[1215983089.652427] add /class/usb_endpoint/usbdev1.4_ep00 (usb_endpoint) UEVENT[1215983089.657975] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1/1-1:1.0 (usb) UDEV

Hi I have a Tripp lite smartusb550 using fedora 3 (2.6.12-1.1381_FC3smp). Managed to establish communication with the ups using the tripplite_usb driver but get the following errors Any help to make it work will be appreciated cheers Julio -----------------------------------------------------------------------------------------------------------------------------------------------------

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi all, just landed here so apologize. I've googled a lot but I can't find a way to get my UPS working with NUT. here my ( relevant ) details: lsusb ... ... Bus 001 Device 027: ID 0001:0000 Fry's Electronics ... ... lsusb -v -d 0001:0000 Bus 001 Device 027: ID 0001:0000 Fry's Electronics Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB

On 23/01/16 16:52, Charles Lepple wrote: > [please use reply-all to include the list on your response] > > On Jan 23, 2016, at 11:14 AM, Tim Clarke <tim.clarke at manifest.co.uk> wrote: >> Centos 6.7 >> Linux man8.m1.manifest.co.uk 2.6.32-573.12.1.el6.i686 #1 SMP Tue Dec 15 >> 18:25:17 UTC 2015 i686 i686 i386 GNU/Linux >> >> Installed: >> nut.i686

Hi all, I've bought UPS FSP EP 850 because I have similar UPS, FSP EP 1000. It is working on my other server with with Fedora 14, kernel 2.6.35.14-106.fc14.x86_64 and installed nut-2.6.2-1. My new UPS is detected by kernel (see below lsusb output) and is partially detected by blazer_usb driver also. But it doesn't communicate with driver (see below blazer_usb output). I run all