similar to: centos and jmicron

Hi All, I know Centos 5 is almost EOL and all this is old but.... I'm helping a colleague who has moved a Centos 5 install on an IDE disk to system with a Foxconn M'board. His idea is to use the SATA interface that's on the Foxconn. The thing boots OK and then gets into a loop trying to start the interfaces to the SATA disks. Oceans of stuff like this in /var/log/messages Aug 7

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

I have a freshly built, updated EL6 system and am having problems with USB stability - at boot everything works fine but within a few hours, USB devices start disappearing randomly. At first I though the USB devices were suspect, but removing the suspect devices and an accessory PCIE USB card hasn't changed anything. As of now, a single USB device is working. (which is lucky, it hosts the

Greetings all- I need to purchase a PCIe SATA or SAS controller(non-raid) for a Supermicro 2U system. It should be directly bootable. Any recommendations? The system will be running CentOS 5.4 as an LTSP system. Thanks! --Tim

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my

Hello All, I have a machine that crashed. Some part of the motherboard (power supply-related) went south. The motherboard, CPU and memory have been replaced with a much newer architecture. The OS and data are intact on two SATA drives that were RAID1 with LVM. I am going to use 'linux rescue' to recover the LVM backup so I can mount the RAIDs (there were two) in a new CentOS

P? Thu, 3 Oct 2019 07:38:05 -0500 Valeri Galtsev <galtsev at kicp.uchicago.edu> skrev: > > On Oct 3, 2019, at 6:24 AM, G?nther J. Niederwimmer > > <gjn at gjn.priv.at> wrote: > > > > > > 07:00.0 Serial Attached SCSI controller [0107]: Intel Corporation > > C602 chipset 4-Port SATA Storage Control Unit [8086:1d6b] (rev 06)? > > > > what

I have a nice new 965 chipset mobo with core 2 duo cpu. I was wondering if anyone has any experiences with this chipset and CPU with 4.4 ? Does the jmicron sata/pata interface work ? Are both cores recongnized with the right kernel ? Does EIST work ? Or should I wait for Centos 5 ? Cheers, Brian.

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

Hello, Am Donnerstag, 3. Oktober 2019, 01:10:58 CEST schrieb Akemi Yagi: > On Wed, Oct 2, 2019 at 3:35 PM G?nther J. Niederwimmer <gjn at gjn.priv.at> wrote: > > This Board have 2 Controller!? > > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset > > SATA > > RAID Controller (rev 06) > > > > On this controller all drives are

Hey there.. I was wondering if anyone could share experiences they have had with the Intel ICH10R SATA controller? I tried looking around but all I could find were RAID references, I have no interest in using the RAID functionality just basic SATA JBOD. Wondering if there are any gotchas for performance, drivers, quality etc. I normally don't touch anything that is not hardware RAID though

I'm having trouble getting a Centos installation to boot on a system with hdd's hanging off an AHCI hba. Long ago, I posted about only seeing four of the six sata ports on my asus server board. According to research I've done since then (I now need the ports!), the solution is to enable the AHCI bios, which turns on NCQ and the last two ports. The already installed system does not

On Solaris x86, does zpool (or anything) support PATA (or SATA) IDE SMART data? With the Predictive Self Healing feature, I assumed that Solaris would have at least some SMART support, but what I''ve googled so far has been discouraging. http://prefetch.net/blog/index.php/2006/10/29/solaris-needs-smart-support-please-help/ Bug ID: 4665068 SMART support in IDE driver

On Wed, Jul 9, 2008 at 1:12 PM, Tim <tim at tcsac.net> wrote: > Perfect. Which means good ol'' supermicro would come through :) WOHOO! > > AOC-USAS-L8i > > http://www.supermicro.com/products/accessories/addon/AOC-USAS-L8i.cfm Is this card new? I''m not finding it at the usual places like Newegg, etc. It looks like the LSI SAS3081E-R, but probably at 1/2 the

Hello, I''m also seeing this exact same problem. I''ve posted on xen-users, but did not get an answer. Venkat seems to be experiencing the same problem as me. I have the latest BIOS for my motherboard DQ35JO. (BIOS ver 933) I''m running a Q6600 as well. It hangs at "Brought up 4 CPUs." I''ve tried all sorts of combinations of Xen versions and kernels to

Hi, im trying to install centos 4.4 server cd on a P5VDC-MX using an 80GB sata drive. centos can't detect the sata drive is there a way to make this work? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070305/018da0e8/attachment.html>

Hi! i compiled rpms like postfix with mysql support. My problem is when i compile programs i can't distinguish the difference between postfix w/o mysql and postfix w/ mysql because they have the same filename(postfix-2.x.x.i386.rpm), what i like to happen is when i compile postfix w/ mysql support it will show something like postfix-mysql-2.x.x.i386.rpm. so when i install and try to query it,

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that

I have a Asus laptop, from the new generation, and my network driver is present in the kernel since version 2.6.32(Jmicron). Is there any CentOS with this kernel? I tried to compile myself, but I failed. Is a bit harder than I thought. Is there any testing version of CentOS or some backports? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, We're having some trouble with detection of a couple of Sil3124 SATA controller cards on newer motherboard and processor combos. Specifically, we're running a Supermicro X9SCM-F motherboard (latest BIOS) and Intel E3-1220v2 CPU. What we're seeing: - Syba Sil3124 PCIe cards are only being detected when installed in PCIe Slot 4 -- The motherboard documentation shows that this