similar to: [LLVMdev] Use of LLVM in a Machine Simulator.

On Sun, 16 Apr 2006, Ralph Corderoy wrote: > I'm slowly getting to grips with what makes up LLVM. I intend to use it > in a machine simulator, e.g. processor, clock, RAM, UART, and other > devices, where the processor will be one of several. It would take a > block of target instructions, e.g. ARM, and produce LLVM to simulate > those on the target machine state, and then JIT

Hi Chris, > Of interest may be this thesis. It talks about converting alpha code > to LLVM (among other things): > http://llvm.org/pubs/2004-05-JoshiMSThesis.html Thanks, it was of interest. I didn't spot its relevance from the title. Cheers, Ralph.

On 09/29/2020 10:07 PM, John Pierce wrote: > try the camera in a USB 2 port, it should work just fine at usb 2 speeds. > most systems, the USB 3 ports hve a 'blue' tongue, while the 2 ports are > black or another color. > > On Tue, Sep 29, 2020 at 6:50 PM H <agents at meddatainc.com> wrote: > >> On 09/29/2020 09:09 PM, John Pierce wrote: >>> do

Dear R-community, not to re-invent the wheel I wonder if someone of you has ever written a function to compute the GHK smooth recursive simulator to estimate multivariate normal probabilities. See for instance page 194 of @BOOK{Greene97, author = {William H. Greene}, year = 1997, title = {Econometric Analysis}, edition = {3rd}, publisher = {Prentice-Hall}, address = {New Jersey

Since OMAP UART has a few distinct features than common 8250 UART, I re-implemented its driver rather than porting it based on ns16550.c. There are mainly two big differences between the implementations. First, OMAP UART introduces the concept of register access mode, which divides the register map into seperated space. Switching the access mode is then necessary when configuring it. Second, THRE

Hi, I want to try Xen on ARMv8 Simulator. Can you please provide guidance?. I am looking for information about sources, build and procedure to launch Xen on ARMv8 Thanks & Regards Vijay

See http://www.gossamer-threads.com/lists/xen/devel/297170 for some information on how to get this going. I''ve rebased and addressed the review comments. As before several of the patches are not to be applied because they can be done better using infrastructure from Julien''s "Allow Xen to boot with a raw Device Tree" patch. They are included for completeness. With

See http://www.gossamer-threads.com/lists/xen/devel/297170 for some information on how to get this going. I''ve rebased and addressed the review comments. With this rebase I''ve picked up some patches from Julien which were required to do things properly, so the gic v7 and device blacklisting patches have been changed to use the proper mechanisms. Previously I was able to boot

This is a fairly standard and old machine with 2 COM ports. Recently (last Friday) I decided to update my RELENG_7 system and also to transition from sio to uart. This what I had before the upgrade: kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 kernel: sio0: type 16550A kernel: sio0: [FILTER] kernel: sio1: <16550A-compatible COM port> port

Hi Julien > On some board, there is no alias to the UART. To avoid modification in > the device tree, dt-uart should also search device by path. > > To distinguish an alias from a path, dt-uart will check the first character. > If it''s a / then it''s path, otherwise it''s an alias. > > Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> >

Besides single-port serial cards, also accept multi-port ones and such providing mixed functionality (e.g. also having a parallel port). Reading PCI_INTERRUPT_PIN before ACPI gets enabled generally produces an incorrect IRQ (below 16, whereas after enabling ACPI it frequently would end up at a higher one), so this is useful (almost) only when a system already boots in ACPI mode. Signed-off-by:

The current early-printk support for ARM is rather hard-coded, making it hard to add machines or tweak settings. This series slightly moves some code to gather UART settings in xen/arch/arm/Rules.mk instead of the actual .c files. Also it allows two different machines with different settings to share the same driver, which the last patch exploits to add support the Calxeda Midway hardware. This

We have upgraded a box from 6.2 to 6.3-RELEASE. Afterwards the box does not recognize its ST Lab I-160 serial card with Netmos 9845 Chipset. It worked flawlessly on 6.2 with puc(4) driver. >From dmesg: pci1: <simple comms, UART> at device 8.0 (no driver attached) ~# pciconf -l -v | grep -B 4 UART none2@pci1:8:0: class=0x070002 card=0x00041000 chip=0x98459710 rev=0x01 hdr=0x00

On Sat, Aug 01, 2015 at 12:58:40PM +0000, Tal Lubko via Syslinux wrote: > Hi > > I would like SYSLINUX to get input from UART and act accordingly. > For example, I want to choose what rootfs to load according to the sequence received from UART. > So I'd like to know if SYSLINUX a the infrastructure for doing this Yes, Syslinux supports serial ports a.k.a. UARTS. Since the very

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hi, I'm having issues connecting Garmin GPS 18 to COM1 on 9.1, I get nothing but silence. Identical setup works absolutely fine with Linux. I've got PPS wire connected to DCD, but that seems to make no difference on Linux, so I presume it shouldn't affect fbsd either. On Linux, I get: $ uname -a Linux ubuntu 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64 x86_64

These series patch enable Allwinner A31(code name sun6i) support in assemble. with these patches, the cpu 0 of sun6i SOC could successful boot into the c environment. Bamvor Jian Zhang (4): xen/arm: introduce Cortex-A7 support xen/arm: introduce Allwinner sun6i SOC basic support xen/arm: enable early printk for sun6i xen/arm: enable switch to hyper mode for sun6i xen/arch/arm/Rules.mk

On Wed, 2007-12-05 at 14:22 +0000, Xen staging patchbot-unstable wrote: > # HG changeset patch > # User Keir Fraser > # Date 1196864460 0 > # Node ID f0ac46de680cc6fe8c91699fdda153b125ae515c > # Parent bf21e00155b7dd76653c5340099ecedac7a7de08 > [QEMU-DM] Upgrade emulated UART to 16550A. > > This patch adds 16550 emulation to qemu-dm. I still consider it a work > in

Prior to c/s 23811:f1349a968a5a LSR_THRE was checked only once, while there it got promoted into the surrounding loop''s condition. Since that bit may not clear for an extended period of time (i.e. when no new output is generated), it must not be used in this way indefinitely. Signed-off-by: Jan Beulich <jbeulich@suse.com> --- a/xen/drivers/char/ns16550.c +++

I have been investigating pci pass-through for virtualized guests and the documentation I have found seems to me to lack a certain consistency in its example. This may be due to my not understanding what it is trying to inform me. What I wish to do is to configure a pci multi-port serial i/o card for use by a single virtual host. I start by running lspci -v on the host to identify the serial