similar to: Help in troubleshoot cause of high kernel activity

Hi all We are implementing samba-ldap to act as an nt pdc and are seeing performance problems. We have a 1ghz, 3gb Ram, 36gb box that is running samba-2.2.5 and openldap-2.0.23 under redhat 7.3 with kernel 2.4.18-3. Clients are all Win2k SP3. All the ldap requests are to the localhost interface. The box is acting as the PDC for the domain, and also sharing diskspace and printers. When we get

Issue: Vista reads slowly from a samba server. This appears to pop up periodically here and elsewhere. My samba.conf file has: [homes] ... vfs objects = readahead As suggested elsewhere. Writes are approximately 17-18MB/s which is acceptable. Reads are in the 8MB/s range which is appalingly slow. Using linux smbclient and windows XP clients I can read at 25+MB/s. I've enabled vfs

Does "bwlimit" option really work on rsync locally? We have one type of harddisk and want to slow down rsync I/O on disk because I don't want the disk head gets too hot. While I'm trying to use --bwlimit option, it looks the rsync speed was slowed down, but iostat is not improved at all. In both case the block written speed is increased by the same amount. How could I really

Hi all. I have problem with performance ocfs2. I just instaled ocfs2 1.4.1 in 2 nodes cluster. I use ocfs2 in mail server. This system has large amount of small files about 50kB. Ocfs2 is formated: >> mkfs.ocfs2 -T mail -N 2 /dev/sdb1 mkfs.ocfs2 1.4.1 Cluster stack: classic o2cb Overwriting existing ocfs2 partition. Proceed (y/N): y Filesystem Type of mail Filesystem label=

----- Original Message ----- From: Christian Balzer [mailto:chibi at gol.com] To: dovecot at dovecot.org Cc: 24x7server at 24x7server.net Sent: Fri, 10 Feb 2017 17:58:58 +0900 Subject: On Fri, 10 Feb 2017 01:13:20 +0530 Rajesh M wrote: > hello > > could somebody with experience let me know the dovecot config file settings to handle around 1500 simultaneous connections over pop3 and

Well, you are the second person who has complained about the performance of OCFS with the PERC controller. Best option would be to contact DELL. We are in contact with them... as in, they inform us of any issues they have with linux/ocfs on their hardware. As we do not have this particular hardware inhouse, all we can only speculate as to what the issue is. Things to look for ==> output

Hello, We are planning to moving most of our servers to ESX but before buying our SAN, we want to do some I/O stats to see if iSCSI is enough or if we have to go with FC. So I found a plugin for Nagios that can log I/O stats with iostat. So far it's fine with single disk/one partition servers, but on our Oracle Database 10g server, we have two drives in RAID 1 (/dev/sda) and 4 other

Hi Folks, I've inherited an old RH7 system that I'd like to upgrade to CentOS6.1 by means of wiping it clean and doing a fresh install. However, the system has a software raid setup that I wish to keep untouched as it has data on that I must keep. Or at the very least, TRY to keep. If all else fails, then so be it and I'll just recreate the thing. I do plan on backing up

Hello, I have just get started using pxelinux, and encountered a problem. The document says the simple menu system supports serial console, and it works on syslinux 0.2x, but it doesn't seem to work in 0.3x and 0.4x. I confirmed that this patch fixed the bug. *** com32/lib/sys/xserial_write.c~ 2006-10-30 08:30:35.000000000 +0900 --- com32/lib/sys/xserial_write.c 2006-10-30

Hi people... Here we use Xen 4 with Debian Lenny... We''re using kernel 2.6.31.13 pvops... As a storage system, we use AoE devices... So, we installed VM''s on AoE partition... The "NAS" server is a Intel based baremetal with SATA hard disc... However, sometime I feeling that VM''s is so slow... Also, all VM has GPLPV drivers installed... So, I am thing about

I just had a problem that had me stumped for an hour. All of a sudden all of my view specs were failing, and I couldn''t get good troubleshooting information from the rspec output. The output from running `rake specs` was a bunch of HTML from app/views/exceptions/internal_server_error.html.erb, but there wasn''t enough info there to diagnose my problem. It just said

Hi all, Can anyone suggest some methods and tools to help troubleshoot a problem with SID's? I am using Samba 3.0.2a on RH9 joined to a W2K ADS "security = ads". I am trying to set NT ACL permissions on my shares, but after they are set and the Everyone group is removed, the users cannot connect to the share. With logging turned up, I can see access checks, but the user sid does not

How can I debug SIP DTMF? If I do 'sip set debug peer xyz' I see no messages related to DTMF... or if I just do a global SIP debug for that matter.... I am using RFC DTMF but it's not being passed to the PSTN and I need to debug this further. I've tried to increase the verbosity and the debug ('set debug n') and that didn't help either. I assume this is because even

Dear all, I have a virtual machine with the following specs: Core 2 DUO 3.2 GHZ 4 GB RAM hdd: IDE 320 GB 32 bit OS: centos 5.2 I'm using it for local development with a number of Virtual hosts, and a big mysql database. the prob: At times, with no specific reason. system becomes extremly slugish. http requests takes forever to be served. Even ssh connections takes time to connect, and

Dave Burns wrote: > Hello, > I'm using a recent install of centos 7, no GUI customizations that I > recall. When I log in using the GUI it accepts my password and the mouse > appears on a black screen, like it is preparing the desktop, but the > desktop never appears. If I hit control-alt-f4 and log in using the > command > line, and then execute startx, Everything seems

On Tue, 1 Jan 2019 12:47:42 +0100 Marko Vojinovic <vvmarko at gmail.com> wrote: > after issuing a regular shutdown, > the system starts the shutdown procedure, but stalls at some point, > and never finishes. It gets to the console, writes the "powering down" > message and stops there --- the hardware never actually powers off. Just to add another datapoint --- when

Hi all, I am using Ubuntu8.04/Dovecot 1.0.10 and the dovecot -n shows as following, ----------------------------------------------------------------------- # 1.0.10: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap):

Hi, I'm trying to print to a printer that is connected to an NT 4 Server. The problem is, that nothing comes out of the printer, and I get no error messages, neither on the Linux nor the NT box. The printer queue on NT is empty. Where can I look in order to find out what the problem is? Here is a session with smbclient: dsadmin@linux:~ > smbclient //pc02/hp5pnt added interface

Hi! I am on Ubuntu 20.04 with the vendor provided Samba 4.15.13 packages. My smb.conf is at the end of the email. I have Gnome Tracker set up and working (from the command prompt on the server, tracker search keyword, is working) as per https://wiki.samba.org/index.php/Spotlight_with_Gnome_Tracker_Backend However, from the macOS workstation side, Spotlight still does not appear to be working

hi guys/gals I realize that this question must have been asked before, I sroogled and found some posts on the web on how to tweak/tune gluster, however.. What I hope is that some experts and/or devel could write a bit more, maybe compose a doc on - How to investigate and trouble gluster's speed-performance bottleneck. Why I think such a thorough guide would be important? Well.. I guess